Is LLY merge minable coin with LTC?
Yes, over at mining-dutch |
|
|
|
Hello so I flashed the new os 2 on my Apollo mcu1 seems to work. No hashrate from my dashboard like I said on support by email.
I have a question is that possible to point other miners on my own solo node for the solo mining or it’s exclusive for the Apollo ?
Hi your dashboard is showing 0 hashrate? Yes you can point any Bitcoin miner to the solo pool. The LAN address is shown in the solo pool page, and you can also port forward 3333 to your LAN address so you can access the solo pool from your WAN address. Yes I opened a ticket support they asked me to open the ssh port to check the hashboard im waiting for a response but I’m shure you’re all in the rush to bring us the new Apollo 2  I tried to point my 2pacs and my compacsf but doesn’t seems to work… put the stratum that is shown and my bitcoin adress I will try to port forward to perhaps it will work like this ! The solo mining part works both locally and externally if you port forward correctly! Make sure that your using the following in your cgminer code stratum+tcp://YOURLOCALIPADDRESS:3333 -u YOURBITCOINADDRESS -p x That’s exactly what I made and nothing happens on cgminer … Since I forwarwed the port all seems to work flawlessly ! And to point another miner on the node on your local network use: Ip of the miner:3333 for ex : 192.168.1.xx:3333 Is it possible to rent hashpower from say Nicehash or MRR and point that hashpower to my futurbit node? How would I go about doing that? Thanks everyone |
|
|
|
How to sell or convert into a real coin? |
|
|
|
Just a heads up, not sure if its been mentioned here yet. But I had one of those dell psu's connected. After about a month got a error message on the small screen. Turns out I burned out the chip that communicates PD3.1 tech to the nano. These dell psu's dont have PD3.1 and Canaan won't warranty my device because of this. Do yourselves all a favor and either get the Canaan factory psu's because their actually pretty cheap or make sure your aftermarket ones have PD3.1. It's vital to the longterm lifespan of your nano's.
(sign) ......are you serious? I'm still paying for that damn thing. What about philipma1957? Aren't he's one of the people inspired some people here and redditors to buy Dell charger? Does he have any issues? Also, cheep my ass. I went to indigogo and Canaan PSU was around 70$ include shipping. Although, there's no PSU that you could buy cheeper than 50$ so I guess 70$ is worth it after all. Instead, I could go extra mile and buy another Avalone Nano 3 and let the first one burn to hell, what do you guys think I should do? Not sure what to tell you except just make sure the psu has PD3.1, I overlooked that detail but apparently its one the more important details to pay attention to. Canaan told me many folks are having good success with the Ugreen 160w charger. On Canaan's official site theu come out to just over 66 bucks with shipping included to Canada. I was having a hard time finding something of quality in that price, shipping included. Another one I've seen them talking about in the TG chat that I've had good performance from Amazon is this 210W PD3.1 psu/charger. Currently there is a 15 dollar coupon one can apply bringing the cost down to $34.99 Amazon link, this is not a referral link https://a.co/d/gYgZXNt |
|
|
|
So.... I got my first Avalone Nano 3.
I didn't have a any right PSU so I bought Dell laptop charger and works flawlessly.
I've been solo mining in millspools for BCH for while now..... for with no sign of hitting the block.
Pools hashrate is 7.807 PH/s and network difficulty is 516.886 G... I'm start to thinking I'm just push my luck here.
I'm thinking switch to solo mining Doge coin.... Seem to be less difficult and but same payout as BCH.
EDIT:
Never mind, someone in reddit mentioned you can't mine Doge with SHA256 devices.
So I guess BCH as it is.
So, main question is... If I only got 1 Avalone Nano 3.
What you guys recommended to get most out of this thing?
Everyone in a youtube or reddit talks about solo mining and pretty much only talk about solo mining
but is there anyway to get most profit out of pool mining?
I'm asking this because I never mined before until I got this device here....
If I stuck with only 1 machine to solo mining, what you guys also recommend to do?
I'm thinking buy more to increase the odds and solo mining other coin too though....
Just a heads up, not sure if its been mentioned here yet. But I had one of those dell psu's connected. After about a month got a error message on the small screen. Turns out I burned out the chip that communicates PD3.1 tech to the nano. These dell psu's dont have PD3.1 and Canaan won't warranty my device because of this. Do yourselves all a favor and either get the Canaan factory psu's because their actually pretty cheap or make sure your aftermarket ones have PD3.1. It's vital to the longterm lifespan of your nano's. |
|
|
|
I have opened over 10 nano's and have not damaged even one. If you don't know what your doing when handling electronics then don't even start. |
|
|
|
Whats up with the web wallet? Rug Pull? |
|
|
|
SoloChance.org Calculate the chance of hitting a block for all cryptocurrencies when solo mining. Are you ready to critical-hit a block? 🎲🟨🟩 https://solochance.orgAboutAfter losing more than 2000 dollars on a hashpower rental service, I decided to see my actual chances while doing rental solo mining. I discovered solochance.com, but it supports only Bitcoin, but I needed to see my Bitcoin Cash & Monero chances, and created SoloChance.org. Donationsbitcoin: bc1q76jymrg4zjwrn6ej2yasvfxju4pfn228wl7r5w bitcoincash: qpkm465ysv40lftngqy9rq22tgggun0mxsmsd6pd8u litecoin: ltc1qmjhg6n96la3mszdwrnppz3jg8drtr7627rxusu dogecoin: DH3n1YKXmVxdeMgrpbZb1FEQ8dj7tJmAUd ravencoin: rM4oFxz3i3APThvw2MtktVHdHps1nmdPMp monero: 46dYku4VfVvgcYLNq9kt33aujZ142rf7p1MYxury1BdVBDLgZdBVhr2i5fsd89rXx6B1iUHqUYSbZS1 rUWcbad3KLmFkeTG I really like solo miners community, so I do hope to keep improving the service. I think that I can make it turn into a solo miner marketing service that shows devices' block chances and shopping ref URL's next to them. Thank you. Wondering if you could add digibyte? Thanks and great work on the site.. |
|
|
|
Any more ideas? We are all ears There is an incredible big market worldwide for heating equipment that is electrically powered. If you could just get 1 % of those customers to use a bitcoin Miner for heating instead of a simple heater you would probably already sell more miners than any other company. The needs for this miner would be: -Low Noise -High Safety -Power Output of 3-5 KwH - Good Build quality and design I agree, but not with the power output requirement. It should have lower power output so that it can be plugged into a standard wall outlet. 1.2-2.4kWh max. Plug and play/heat. For 3-5kW you need to have a dedicated high current cable to where ever you want to plug it in. I brought that up directly with Canaan in the past and their response was that they're not interested in making home miners. I then followed up about getting chips from them for someone else to make home miners and they ignored my emails. This aged rather well, clearly someone was listening at Canaan considering the Nano 3's release. |
|
|
|
Hello everyone, as mentioned this Jan in Miami, UnbreakableCoin will be one of the first assets created and launched via Aspire. We will do a swap for those of you who have stayed with UNB. I'm grateful for all of those who've supported the idea of UnbreakableCoin over the years and I hope that you'll enjoy the idea of a better UnbreakableCoin. The original Unbreakablecoin blockchain will remain as is, and the original codebases on Github won't be supported anymore. The new UnbreakableCoin will be supported moving forward and won't require outside mining to create blocks (you can mine gAsp blockchain if you like but we won't require it from outside miners anymore). I've made sure the swap process will be simple. If you haven't already, then please move your coins over to BOA's exchange. https://boaexchange.com/. An automatic swap will be done there. ***Please note*** If you are a USA resident and can't access BOA's exchange then simply contact me. Once the launch of Aspire happens I'll provide you a UNB address to send your Unbreakablecoin to. I will then personally swap out your coins to your gAsp address when the time comes. If there are any problems with you moving your coins to the BOA exchanges keep in mind, the UnbreakableCoin chain is moving at a very very slow speed (like dead slow right now). If you send your coins to BOA please do not worry about the UNB coins not showing up for days or even a few weeks. At some point before the swap I will rent plenty of hash to move plenty of blocks and your coins will then get the confirmations that they need. You have time as of right now but I would like this to happen by the end of the year. Feel free to DM if you have any questions. Jim Blasko So whatever happened with this project... Is Jim Blasko still around? Anyone know or have any info? |
|
|
|
|
I live in Toronto, is pickup available?
|
|
|
|
Purse.io and alagoria both offer the same service. 10% discount is not that much and is way too high when we consider a potential scam attempt here.
is it safe to use purse.io? thanks in advance Purse.io is very safe and quite amazing. |
|
|
|
I would love to see this project having important partnerships being made that could further boost it. I also know the hard work of the team in pursuing it and it will likely become very productive very soon.
Well the secret is out. Our newest partnership prospect is Paycent! They have issued a debit card that acts as the bridge between crypto and fiat and now even precious metals. We are in the contract negotiation phase but I have received verbal confirmation that we are good to go. Wow that is great news! I didn't expect that to materialize anytime soon but I know all hard work done by your team will definitely payoff like this milestone. Nice one guys! Yep. This is one of the most exciting partnerships that we have in the works right now. Nothing is signed so I'm not counting my chickens. But I can tell all parties to this deal are excited as well. Partnering with other companies is indeed very important, especially since the softcap has been achieved, this shows that URAllowance is ready to work, and launch its products, hopefully many partners who are happy to join this project Scratch that Paycent partnership..... Or better yet, put it on the back burner. We came to terms but this partnership is now contingent on us being listed on Coinmarketcap. This is perfectly understandable and we intend to pursue this at a later date. For now, we continue to focus on development and tallying up the bounties. That's a pity! But thanks for being honest and transparent and updating the community straight away. It's a good idea to focus on your product, further progress certainly will lead to new partnerships. Yeah, I am somewhat amazed by the transparency of the team with regards to project status as this is the first time I've ever seen a honest response with regards to a stalled partnership and that is quite commendable. It is indeed quite commendable. As for being listed on coinmarketcap. Once this project evolves through it's own organic processes it will get picked up by exchanges hence CMC. It's awesome to know there is a payment gateway sitting on the back burner and ready to launch at a moments notice. |
|
|
|
I can not understand. Do you already have mining equipment or not? Just in the photo I see an empty room
Crowdsale is not over yet. No one has bought the equipment and probably won't buy until the crowdsale is over Those who contribute to the crowdsale, what are they actually buying? Part in the network or also equipment? They buy the opportunity to profit from the mining capacity that the team will create in the future And if the business turns out to not be profitable, will investors have access to the physical equipment if the company closes its doors? News to everyone here....I am an old school miner and I have said long before mining took a down turn a plan b needs to be in place. Also, currently the most powerful miners make just over 6 bucks a day and thats if you have free electricity. Not enough profits there to share with everyone. You are right. Miners are in trouble these days. But I think miners will be in a better condition in the coming months. The price of bitcoin will rise or the difficulty will decrease. One of these should happen. Both need to happen |
|
|
|
Since the member has stopped responding on Wickr, The Wallet/Withdrawl system does not work and I am still waiting for updates on this matter.
Thanks for the update |
|
|
|
I can not understand. Do you already have mining equipment or not? Just in the photo I see an empty room
Crowdsale is not over yet. No one has bought the equipment and probably won't buy until the crowdsale is over Those who contribute to the crowdsale, what are they actually buying? Part in the network or also equipment? They buy the opportunity to profit from the mining capacity that the team will create in the future And if the business turns out to not be profitable, will investors have access to the physical equipment if the company closes its doors? News to everyone here....I am an old school miner and I have said long before mining took a down turn a plan b needs to be in place. Also, currently the most powerful miners make just over 6 bucks a day and thats if you have free electricity. Not enough profits there to share with everyone. |
|
|
|
You didn't even bother to change half of the text from my thread... Eckmar's Marketplace and Auction Script [ESCROW FEATURES] [199$] [TOR] [DEMO] Explanation to everyone reading this, the product shown above is my work (as you can see in my thread that I linked in the post) and the OP is not authorized by me to resell it. Now obviously I cannot prevent anyone from posting or delete someone's thread but I can at least warn potential customers of the OP that they would be buying something that is in fact my product and I wouldn't encourage them to buy it from 3rd parties (especially this untrusted). @OP What you are doing is simply wrong. I would like to ask you nicely to stop selling my product. Don't even try to explain you self by saying you did some modifications or changed color of the theme on my product and that makes you entitled to sell it... Dear Eckmar, I understand what you are saying. I do see he copied many word for word. But if I may ask does your script accept Monero and auto convert back to bitcoin for seller? Also you have search engine? You have these things I would be interested in your product. |
|
|
|
I was expecting more panic talk in this thread, anyway, securix still have a long way to go and let's hope for a brighter future.
People does not want to talk about it anymore, they are already in panic this year and I think they get used to it. What's good to discuss is when the price will back up and we will see pending tokens and coins now to be listed, this means party for all of us here. Yeah, some of people does not want to talk the current situation of cryptocurrency, but some of my friends are talking about the 2019's prediction if we have a bullrun or not. Some people seem to have given hope on it's return this year. A lot of persons are focusing majorly on a return in the first quarter of next year. For me, it can remain at the same level until the end of the year, then I can still buy at a good low price. But I hope that in 2019 we will see a better market like this year. Mining is in trouble guys....even bitmains latest asics hardly turn over a profit with their 7nm machines....Also Giga watt mining claimed bankruptcy today. |
|
|
|
With BTC below 5000USD, what’s happens when mining kicks off and we are below or within this price range?
Would it be profitable to invest in mining while BTC is below 5000USD?
These days, mining is not profitable especially in the countries that electricity is expensive. So, there is no doubt it is risky and you might lose money. correct |
|
|
|
|
Show Posts
