 Show Posts
|
|
Pages: [1]
|
|
For sale GPUs NVidia EVGA GTX970 4GB SC ACX 2.0 - 40 pcs..
Purchased in 5.2016 in Germany, official EVGA distributor, warranty till 5.2019. Perfect condition, almost unused.
Price: 200 USD/1 GPU (or in BTC according to current BTC/USD rate)
Location: Czech republic, ship within EU (or beyond upon agreement.)
PM, please
|
|
|
|
I don't want help I just want to know did anyone get 280X working more than 1.7MH/s.
There seems to be no one here caring about the mining support on the dev side, nor in this thread! I also cannot get my 390X running - sgminer shows 2.7 MH/s, but does not hashing to the pool (neither yiimp nor suprnova). Similar problem with GTX 970 - with sgminer it just restart my PC, meanwhile ccminer ensures only 2.2 MH/s per 1 GPU. Tried all possible options and params - with no success. Every second one here is claiming he's getting some fantastic hashrate values, but no one even cared to put a command line with params which he's using... |
|
|
|
|
Still cannot sync the wallet on Win 8.1. even with nodes added to config file as was recommended earlier here..
Any ideas?
Thanks in advance
|
|
|
|
there is no reason a pc restart during mining....
But it restarts...((( Maybe I should add other params, like -g and -w? |
|
|
|
Hi mate,
How much for your PSUs? Do you have the box and all cables? It would be shipped to France, is that a problem? Also do you accept escrow (can't remember if I read it in your ad)
Cheers,
Q.
Hi, sorry, but my main aim is to sell GPUs or the rigs complete (on racks or not), not by parts like PSUs or MBs separately. |
|
|
|
R9 285 do almost 7MHs, and RX470 (nitro+) 18
but sgminer also works on nvidia, 14MH on a 1070 and 4MH on a 750ti (i 19)
Please specify which driver version should be used fro GTX970, and other sgminer params? Each time I start it just with -i 19 on 364.51 drivers, miners starts and after 5-10 secs restarts my PC..(( |
|
|
|
|
For sale GPUs NVidia EVGA GTX970 4GB SC ACX 2.0 - 40 pcs..
Purchased in 5.2016 in Germany, official EVGA distributor, warranty till 5.2019. Perfect condition, almost unused.
Price: 200 USD/1 GPU (or in BTC according to current BTC/USD rate)
Location: Czech republic, ship within EU or beyond upon agreement.
PM, please
|
|
|
|
|
Hello everyone,
STS wallet (Win8.1) does not sync. All the magics with addnode and stress.conf done - no result...((
It starts and just stays quiet, reporting 0 actine connections to Stress network...
What and who else could help?
Thanks in advance!
|
|
|
|
If all network Hash Rate on supernova pool. Where is block 666 and 667 ?
Rob?
there are several other pools, not all miners are on suprnova BTW, regarding other pools: when is it going to start with payouts from yiimp.ccminer.org? Been mining there for 3 days already, my VLTs a piling up there, but all "Immature" and ain't tending to get "Mature"... Wanna get some of them to my wallet ultimately...  Thanks in advance) |
|
|
|
You create 5 different pools with different priorities, but they'll need to be the 5 highest priorities in your list. I have mine setup as 4,5,6,7,8,9 (lets me add something as 1,2,3 if I wanted to). Miningpoolhub will automatically shut down the ports it's not using when it switches between them. For example, if it's auto-switching on x11, the x13, x15, quark and qubit pools will show as 'down' in the baikal because miningpoolhub has shut them off, letting the baikal auto switch to them.
@btc3769, thanks a lot! |
|
|
|
Baikal Miner Setting for MiningPoolHub1. Set each algo and server info like below. These server and port numbers are written at FAQ page also. quark : stratum+tcp://hub.miningpoolhub.com:12015 qubit : stratum+tcp://hub.miningpoolhub.com:12014 x15 : stratum+tcp://hub.miningpoolhub.com:12009 x13 : stratum+tcp://hub.miningpoolhub.com:12008 x11 : stratum+tcp://hub.miningpoolhub.com:12007 2. Set "ASIC Baikal - Quark, Qubit, x11, x13, x15" at Hub worker page. https://miningpoolhub.com/?page=account&action=hubworkers3. You can also set some coin (like Bitcoin) at Auto Exchange page to get all coins exchanged. (optional) https://miningpoolhub.com/?page=account&action=autoexchange Hello, regarding these setting above for Baikal miner - how can I set them in the miner interface? Do I have to create 5 different pools for the Baikal miner with the same priority? Or - ?... Thanks in advance! |
|
|
|
|
@miningpoolhub,
thanks a lot for detailed info. That helped me to understand the idea.
|
|
|
|
Hello I have some ETH stuck in exchange, can you please clear them up, the price is tanking and i don't wanna loose more than i already did  thanks! Seems to be no reaction from admins! I have some coins stuck after AutoExchange - wanted to convert into BTC, the Balance page says the coins are ON EXCHANGE, but BTC wallet shows 0 for several hours already!!! @miningpoolhub admins, any chance to resolve it??? Such slow flow ruins the idea of mining!!! |
|
|
|
Hello, want to make clear regarding algo-switch for NVidia GPU 970s rig. Correct me please when I'm wrong 1) e.g. I want to use the pre-defined algo set " NVIDIA - Blake-Vanilla, Ethash, Groestl, Myriad-Groestl, NeoScrypt, Quark, Qubit, Skein, X11, X13, X15". I create a HUB-worker with the same job settings ( NVIDIA - Blake-Vanilla, Ethash, Groestl, Myriad-Groestl, NeoScrypt, Quark, Qubit, Skein, X11, X13, X15), set up the bat-file with all these algos (as shown at the sample page) to ports 12xxx and launch it 2) The ccminer shall run through all the starting commands and select THE MOST PROFITABLE ALGO (at the moment), and start mining THE MOST PROFITABLE COIN within this algo - am I correct here?3) If no AUTOEXCHANGE option is set, then the mined coins shall store in my account, waiting till I ether withdraw it to a definite coin's wallet or convert into some other coin (e.g. BTC). If I got the work flow right, then HOW DOES THE POOL EVALUATE THE MOST PROFITABLE ALGO FOR MY GPU (in my case - GTX 970)? Can I affect this setting somehow? Is it done only with the "difficulty" parameter for each algo in ccminer command line? Or in some other way? If it is "difficulty", then can anybody share the correct values for GTX970 for each of these algos (Blake-Vanilla, Ethash, Groestl, Myriad-Groestl, NeoScrypt, Quark, Qubit, Skein, X11, X13, X15)? Thanks in advance to everyone who can help!!! Or please PM me!!! |
|
|
|
Hello,
could somebody please advise how to set up sgminer for mining lyra2v2 on zpool? Which version of sgminer should be used, and with which parameters? Or probably not sgminer? I'm running Sapphire R9 390x and MSI R9 390X.
Tried a number of combinations, but each time it either submits only invalid shares or just doesn't work at all.
Thanks in advance
Whats your command line you are using to start your miners? Most problems are usually using the wrong lyra algo. For lyra2v2 I tried: a) sgminer 5.3.0. with these params: • sgminer.exe --no-submit-stale -k lyra2 --url=stratum+tcp://mine.zpool.ca:4533 -u [BTC_WALLET]:x -p c=BTC,lyra2 --keccak-unroll 0 --hamsi-expand-big 4 --nfactor 10 --xintensity 19 --thread-concurrency 19 --worksize 64 --gpu-threads 2 --> only invalid shares and max. hashrate 700-800 MH/s with MSI R9 390X (tried to change password params varously - all the same) • sgminer.exe -k lyra2 --url=stratum+tcp://mine.zpool.ca:4533 -u [BTC_WALLET]:x -p c=BTC,lyra2 --> freezes forever at "Initializing kernel lyra2re.cl with factor 10, n 1024 b) sgminer 5.1.0. with these params: • sgminer.exe --no-submit-stale -k lyra2v2 --url=stratum+tcp://mine.zpool.ca:4533 -u [BTC_WALLET]:x -p c=BTC,lyra2v2 --nfactor 10 --xintensity 1024 --thread-concurrency 8192 --worksize 128 --gpu-threads 2 --> only invalid shares and max. hashrate 700-800 MH/s with MSI R9 390X (tried to change password params varously - all the same) And lots of other combinations.... Where am I wrong? Looks like your not putting the algo in properly, lyra2 is definitely wrong but some miners are different for v2, try lyra2rev2? Now trying with these params at sgminer 5.3.0. sgminer.exe -k lyra2rev2 --url=stratum+tcp://mine.zpool.ca:4533 -u [BTC_WALLET]:x -p c=BTC,lyra2rev2 --keccak-unroll 0 --hamsi-expand-big 4 --nfactor 10 --xintensity 1024 --thread-concurrency 0 --worksize 64 --gpu-threads 1 Again freezes at Initializing kernel lyra2rev2.cl ... What sgminer version should I use? Or where else could be my mistake? |
|
|
|
Hello,
could somebody please advise how to set up sgminer for mining lyra2v2 on zpool? Which version of sgminer should be used, and with which parameters? Or probably not sgminer? I'm running Sapphire R9 390x and MSI R9 390X.
Tried a number of combinations, but each time it either submits only invalid shares or just doesn't work at all.
Thanks in advance
Whats your command line you are using to start your miners? Most problems are usually using the wrong lyra algo. For lyra2v2 I tried: a) sgminer 5.3.0. with these params: • sgminer.exe --no-submit-stale -k lyra2 --url=stratum+tcp://mine.zpool.ca:4533 -u [BTC_WALLET]:x -p c=BTC,lyra2 --keccak-unroll 0 --hamsi-expand-big 4 --nfactor 10 --xintensity 19 --thread-concurrency 19 --worksize 64 --gpu-threads 2 --> only invalid shares and max. hashrate 700-800 MH/s with MSI R9 390X (tried to change password params varously - all the same) • sgminer.exe -k lyra2 --url=stratum+tcp://mine.zpool.ca:4533 -u [BTC_WALLET]:x -p c=BTC,lyra2 --> freezes forever at "Initializing kernel lyra2re.cl with factor 10, n 1024 b) sgminer 5.1.0. with these params: • sgminer.exe --no-submit-stale -k lyra2v2 --url=stratum+tcp://mine.zpool.ca:4533 -u [BTC_WALLET]:x -p c=BTC,lyra2v2 --nfactor 10 --xintensity 1024 --thread-concurrency 8192 --worksize 128 --gpu-threads 2 --> only invalid shares and max. hashrate 700-800 MH/s with MSI R9 390X (tried to change password params varously - all the same) And lots of other combinations.... Where am I wrong? |
|
|
|
|
Hello,
could somebody please advise how to set up sgminer for mining lyra2v2 on zpool? Which version of sgminer should be used, and with which parameters? Or probably not sgminer? I'm running Sapphire R9 390x and MSI R9 390X.
Tried a number of combinations, but each time it either submits only invalid shares or just doesn't work at all.
Thanks in advance
|
|
|
|
|
