 Show Posts
|
|
Pages: [1] 2 3 »
|
Finally I can test and confirm that AMD has fixed the issue with slowdown at high DAG epochs for Vega/Polaris/Fiji cards. They are going to release new drivers in a few days.
Any idea if they fixed this issue for Tahiti GPUs? I remember Epoch #1 or so hashed at like 28MH/s with the R9 280X. Would be benefitial if they fixed it for that GPU also. Same with the Pitcairn, Epoch #1 hashed at like 20MH/s with the R9 270X. Same here, Any news about R9's ? 250w @28 Mh/s stock, but can do more with bios mod |
|
|
|
|
Hi all
I come across this ask about what they think about the new mining-oriented GPUs suggested by manufacturers (AMD and NVIDIA)
90 Day Warranty.
Parts maybe low cost*
We would be hostage to these specific models
I have in mind that a Rx 470/570 4Gb today produces 29 Mh / s (Eth) + 650 Dcr, I think a GPU focused on mining could produce little above this, however what really makes me think is that.
I renewed my stock this year, sold all R9 that I had and bought many Rx and GTX with prices from the beginning of the year and I am very happy about it, however it will not be difficult to undo them at the time of the exchange for something more advantageous, but it caused a reflection To think that if we had 4 or 6 specific models and with little guarantee, we would not be entering a trap/bait created by AMD AND NVIDIA?
Thinking about values for mining, they could double or triple as has been happening in several countries in US/EUR/SA/ASIA, I see stores selling the latest models for twice as much as triple the price.
Just as it happens with factory of ASIC.
I invite everyone to a debate but only those who really mine and take it seriously, without bias to gamers and enthusiasts, but are different things, buy a GPU and leave mining a few moments and buy 50/100/200 and keep as style life.
|
|
|
|
I'm in a similar situation where I have ordered 4x XFX RX470, 1x MSI RX470 and 1x 570, will try this pixel patcher and will let you know if I would be able to mine with this configuration. I'm using Claymore only for Ethereum mining (not dual mining) but I get accepted shares rare, which factors affects the overall performance to get accepted shares. My OS is Windows 10 64-Bit, and internet speed is 15Mbps stable, the graphic is MSI RX 470 Gaming and I'm planing to put in the upcoming days 4 more GPU XFX RX 470 Updating, my situation is like below. I have 6 GPUs but they are not working all together, I have tested one by one and all of them are working even though I had to re-install driver and put that patch in order to work correctly (after reboot) but when I put all together I get Code 43 which is not accepting more than 2 or sometime 3 GPUs. I have 4x XFS RX 470 and when I put together only 3 works good and one has only 4Mh/s where could be the issue? I'm getting 22 Mh/s in XFS 470 and 24Mhs in MSI Gaming 470, both unmodified bios until I resolve the issues with drivers !!! |
|
|
|
DwarfPool in maintenance, or new Scam ?
Nobody know, but i think all very strange because just one day in a falling of eth, they stopped pay us.
not is possible only us, are mining in this pool on this fórum.
nobody talking about?
i changed to ertherpool
it's a very ancient big pool i doubt it's a scam just a maintannce, maybe their front isn't working like happened in the past, or they have technicals other issue, yes i'm right check now "Due to technical maintenance the website will be offline for a short period of time. All your shares are calculated, all pool servers work. The main server will be migrated. Payments will be started as soon as possible." Precisely because of this, they filled their pockets of money with our work and now, they disappear, and as the friend below commented, precisely with that gigatesco dump. They dominate more than 50% of mining today. |
|
|
|
|
DwarfPool in maintenance, or new Scam ?
Nobody know, but i think all very strange because just one day in a falling of eth, they stopped pay us.
not is possible only us, are mining in this pool on this fórum.
nobody talking about?
i changed to ertherpool
|
|
|
|
|
I'd like to hear from your mining friends, if you've also had trouble with Dwarfpool in the last few days.
DWARFPOOL - I see that in the last 24 hours there were no payments in EXP and the ETHs are accumulating but they are not in the balance.
Poloniex + Bittrex - Also regarding the deposits in SiaCoin (SC), sent to the poloniex wallet, but in maintenance, I change to bittrex, and it spent 36h and so far I did not receive, but i received yet anothers payments
Details, I have been receiving normally in the last days, then settings are correct, since nothing has been changed, in the SiaCoin pool, it is payment done.
I wonder if the staff has the same difficulty.
I already open tickets, but none of them was answered.
Get Away Dwarf pool, they are trading with your money.
|
|
|
|
|
Go to, Radeon, Settings, games, Global, wattman, disable any dinamic settings.
Go to Afterburner and set more Power Limit, be care with high values.
If you overclock settings only.
|
|
|
|
Are you kidding me?  |
|
|
|
Sootha You use this adapter?  |
|
|
|
|
how i set a miner for each RIG ?
Separated.
example
Rig 01 - Eth+DCR
Rig 02 - Equihash
-------
How i disable overclock ?
I have bios modded yet, but when i set clocks same bios mod, freeze and restarts my Rig.
-------
Tnx
|
|
|
|
Dev - tytanick Can you help Me ? My RIG stop in this moment.  Setup. Rx 470 4Gb Xfx Pen Sandisk 32GB Gigabyte GA-970A-DS3P AMD x2 250 8Gb RAM |
|
|
|
|
It depends a lot on the ambient temperature. If it is above 30ºC, consider it to be unnatural, but always check the exhaust air condition and inject cold air.
Remembering that the most efficient system would be that they expel the air in the open, however as we work with electronic components this becomes impossible because of the rains, but a draft is always welcome.
The good thing would be to put in an environment like I said earlier with constant or forced air exchange.
Spacing between GPUs is also important.
Standard temperatures for
R9 280x is 68 ° C ~ 75 ° C
Rx 470 4gb with Oc, 64 ° C ~ 70 ° C
In Rig, Space 8 cm
|
|
|
|
Can someone help me ? I have Rigs with R9 280x 3GB / 290x 4GB and Rx 470 4GB I mount a R9 280x and Rx 470 4GB, for configuration tests. I have a problem, Mining with Claymore 9.3, I have more hashrate with a R9 280x than Rx 470. What do I have to do this? R9 - 25 Mh / s RX-21 ~ 22 Mh / s Configuration File. -epool exp-eu.dwarfpool.com:8018 -esm 0 -mode 0 -epsw x -eworker R9-AMD -allcoins exp -dpool stratum+tcp://dcr.suprnova.cc:3252 -dcoin dcr -dcri 22,23 -ethi 10 -etha 0,0 -asm 2   I tried -di 01 and another bat file with -di 02, and not solved |
|
|
|
Can someone help me ? I have Rigs with R9 280x 3GB / 290x 4GB and Rx 470 4GB I mount a R9 280x and Rx 470 4GB, for configuration tests. I have a problem, Mining with Claymore 9.3, I have more hashrate with a R9 280x than Rx 470. What do I have to do this? R9 - 25 Mh / s RX-21 ~ 22 Mh / s Configuration File. -epool exp-eu.dwarfpool.com:8018 -esm 0 -mode 0 -epsw x -eworker R9-AMD -allcoins exp -dpool stratum+tcp://dcr.suprnova.cc:3252 -dcoin dcr -dcri 22,23 -ethi 10 -etha 0,0 -asm 2   |
|
|
|
Hello
I do not understand what to put in the command line for the DCR?
Do not put wallet address?
Login and pass the pool account?
i use claymore :
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal 0x242a8722fE288FCA7eF03b627D0C78799166C695/PC/bgs.mathieu59@gmail.com -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal DskqH7NwywxaaYENnQt6kBz28aBzKUUdFjb.PC -dpsw x -allpools 1 -r 1 -dcri 30
command ok ?
DCR share rejected ................ Huh
Add -dcoin dcr |
|
|
|
|
Folks!
Previously I had made some changes in the R9-2xx and made the flash in the bios and everything was going well,
But in the Rx the story changes.
When I change Bios, error "43" occurs, which does not initialize the GPU.
I'm having to use Wattool to change the clocks settings and board voltages.
Has anyone else gotten an alternative to this problem?
Even installing previous drivers, remains the problem, and changing the atikmpag tbm.
The solution would be to sign the drive again for this, but I could not find something relevant.
I would like opinions on the subject.
|
|
|
|
|
Friend there is some Change in Bios, I have the same rig, and the averages for each Card is 22.3 Mh / s and DCR 400
|
|
|
|
|
The problem, not is start, but is change language
|
|
|
|
Man, this is a good job, Very helpful How i change language to english ?  |
|
|
|
|
The maximum number of Rig is 5, I do not know if it still has the problem, in the forum a friend rode with 6 boards, but I use with 5 and everything goes well.
|
|
|
|
|
