johnkill
Newbie
Offline
Activity: 8
Merit: 0
|
|
May 30, 2017, 07:23:44 PM |
|
How to mine ETH+SIA with Claymore on Nicehash? what is SIA address?
|
|
|
|
kirune
Newbie
Offline
Activity: 4
Merit: 0
|
|
May 30, 2017, 07:32:39 PM Last edit: May 30, 2017, 09:07:22 PM by kirune |
|
I've had several FAILOVER 1 disconnection issues, around 6 today (30/05/17) starting 8:30am UTC +1. It last 10 minutes, then it reconnects. also I've got this error: http://imgur.com/a/j5rO7I'm aware that maybe these are 2 unrelated issues, the disconnections and the 32700 error code, but I'm completely lost, and I'll appreciate some info to start working with. what is the meaning of FAILOVER 1? why this FAILOVER always last 10 minutes? is this ETH:Recieved Error :{"jsonrpc" : "2.0", "id" :4, "error" : {"code" ; -32700, "message" : "Worknotfound"}} related to the FAILOVER or is something completely different. which is the meaning of ETH:Recieved Error :{"jsonrpc" : "2.0", "id" :4, "error" : {"code" ; -32700, "message" : "Worknotfound"}} and which is its possible solutions? thanks a lot for your assistance and patience. -------------------------------- Again at 22:58:05 Talked with ISP, tried to clear the connection. Reseted router, restarted PC..... ----------------------------------
|
|
|
|
|
dmatthewstewart
|
|
May 30, 2017, 07:48:42 PM |
|
Im curious as to why the DCR authentication fails. Is it buried somewhere here in these 500+ pages?
Same problem here. Using windows7/64bit with claymore 9.3 on decredpool.org Have you created your worker?? Oh sure. Not sure why it was failing. It finally worked after a few start ups.
|
|
|
|
Teress
|
|
May 30, 2017, 08:15:26 PM |
|
I've had several FAILOVER 1 disconnection issues, around 6 today (30/05/17) starting 8:30am UTC +1. It last 10 minutes, then it reconnects. also I've got this error: I'm aware that maybe these are 2 unrelated issues, the disconnections and the 32700 error code, but I'm completely lost, and I'll appreciate some info to start working with. what is the meaning of FAILOVER 1? why this FAILOVER always last 10 minutes? is this ETH:Recieved Error :{"jsonrpc" : "2.0", "id" :4, "error" : {"code" ; -32700, "message" : "Worknotfound"}} related to the FAILOVER or is something completely different. which is the meaning of ETH:Recieved Error :{"jsonrpc" : "2.0", "id" :4, "error" : {"code" ; -32700, "message" : "Worknotfound"}} and which is its possible solutions? thanks a lot for your assistance and patience. I see nanopool have latest weeks some problems with their eu servers. I mine there too and have same fails. It is not problem on your side but theirs...
|
|
|
|
OverEasy
|
|
May 30, 2017, 09:33:12 PM |
|
Anyone managed to get 4xx and 5xx running on same rig? Man I think I tried about everything now.
I got 2x 470 (modded) 2x 480 (modded) 1 570 (modded)
With the Crimson 16.x.x drivers I can easily get my 470's and 480's but the darn 580 just shows as standard VGA.
I even tried the latest greatest 17.something driver and that was a mess lol. It showed all 5 cards but never would actually load the drivers correctly..
Grrr gotta be a way lol....
Yes. I have mixed rig with 480 and 570. Simply use latest AMD driver, patch it and start mining Could you explain or link to the patch please? I think your talking about skipping sig check but i have never done that. Thanks for any help Uf, I am getting sick of people who dont want to spent their time and search on google, rather spent time of others, who wants to help. Next time I will better not help. Google for atikmdag-patcher... I did spend my time googling and found many different ways to try it. I was simply asking how you did it for my benefit and of course any others reading this with same issues. I have used the patcher with the new drivers and now get past the loading drivers part. All 5 cards are now seen but one card is ALWAYS yellow triangle in device manager. I have switched ports, DDU'd and started over, everything I can come up with. So now I got all 5 cards but one is non-working. So if a 470 is failed and I change the riser to another port and reboot then a 480 will be failed for example. The other 4 will mine. Anyone else have any suggestions (and yes I am researching for an answer elsewhere) lol Well I finally gave up. Skipping sig check allowed new AMD drivers to fully load on 4 of the 5 cards. After numerous tries I could never get the 5th card past error 43 or whatever it was. I pulled the 570 out. Am now building yet another rig and will try again. This time all 570's and again with 5 cards. Fingers crossed... Well I decided to keep pushing lol. Here ya go... In the end I upgraded to Windows 10 latest version, installed 17.4.4 AMD and most importantly patched it with pixel patcher https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcherbefore rebooting. All 5 cards are bios modded.
|
|
|
|
johnambush
|
|
May 30, 2017, 09:52:51 PM |
|
Guys if you have trouble with dag file upload just expand virtual memory. It will do the trick
|
|
|
|
rickjsr
Newbie
Offline
Activity: 5
Merit: 0
|
|
May 30, 2017, 11:08:18 PM |
|
you need to configure the EPOOLS arquive and remove the "#" and configure with the info of your supernova pool and miner.
|
|
|
|
whitrzac
Member
Offline
Activity: 126
Merit: 10
90*c is good, right?
|
|
May 30, 2017, 11:13:31 PM |
|
I've just started playing around with the standalone miner, I usualy use nicehash.
I know nvidia cards are not the best at ETH, but Ive seen a few posts stating that 20+Mhs should be possible on a 980ti.
I'm getting 2.XXX Mhs when testing with the default settings, and I cant find what I'm missing....
The system lags incredible bad, as in move mouse, wait 5s to see where it ends up.
Driver version is 382.5
|
|
|
|
ivanst776
Legendary
Offline
Activity: 1540
Merit: 1003
|
|
May 30, 2017, 11:25:21 PM |
|
I'm in a similar situation where I have ordered 4x XFX RX470, 1x MSI RX470 and 1x 570, will try this pixel patcher and will let you know if I would be able to mine with this configuration. I'm using Claymore only for Ethereum mining (not dual mining) but I get accepted shares rare, which factors affects the overall performance to get accepted shares. My OS is Windows 10 64-Bit, and internet speed is 15Mbps stable, the graphic is MSI RX 470 Gaming and I'm planing to put in the upcoming days 4 more GPU XFX RX 470
|
|
|
|
rickjsr
Newbie
Offline
Activity: 5
Merit: 0
|
|
May 30, 2017, 11:41:30 PM |
|
The lastest version is 9.4? but everyone uses 9.2?
why?
|
|
|
|
mewhoyou
|
|
May 31, 2017, 12:28:45 AM |
|
Guys,
I have all ways been using single miner and read somewhere that dual mining would not affect the ETH mining. I have been trying but it does. Is there any specific command? I have tried -ASM 2 but it still the same when I mine ETH and SC. ETH still goes down when i dual mine.
|
Ethereum the Next Big Thing?
|
|
|
cashen
|
|
May 31, 2017, 12:32:29 AM |
|
Is this normal? Effective Hash Rate / Reported is right at 95%
|
|
|
|
sp00lin9
|
|
May 31, 2017, 12:45:31 AM |
|
Is this normal? Effective Hash Rate / Reported is right at 95% My effective hashrate can get erratic like that too sometimes..
|
|
|
|
alucard20724
|
|
May 31, 2017, 01:50:13 AM |
|
Hi guys, girls and Claymore.
I was wondering if Claymore will release a version that allow to mine with 9 gpu. MOBOs are heading to the point where mining with 9 gpus is possible. Any information related to this point?
Thank you.
It's the operating system and motherboard that needs to support more gpu, not the application.
|
|
|
|
manotroll
|
|
May 31, 2017, 02:43:37 AM |
|
How do I know if the devfell is being mined in the poll I'm using? miningpoolhub.com
|
|
|
|
TechPark
|
|
May 31, 2017, 02:57:50 AM |
|
-epool eu1.ethermine.org:4444 -ewal 0xeb2B1dEefb10DfB8093725Ce383cD7aa517c73a9 -epsw x -esm 0 -mode 0 -tt 80,80,80,80 -asm 0
all gpu works in single, more gpus the other says Cannot create dag
Try this key with value 1. -eres this setting is related to Ethereum mining stability. Every next Ethereum epoch requires a bit more GPU memory, miner can crash during reallocating GPU buffer for new DAG. To avoid it, miner reserves a bit larger GPU buffer at startup, so it can process several epochs without buffer reallocation. This setting defines how many epochs miner must foresee when it reserves GPU buffer, i.e. how many epochs will be processed without buffer reallocation. Default value is 2.
|
|
|
|
TechPark
|
|
May 31, 2017, 03:01:00 AM |
|
Guys, I am really really often facing this hangs and miner stuck on my cards. -gser 2 did not solve this issue. Any ideas? 29,4 Mh/s - is the first idea. Read the first page of this thread thoroughly - is the second idea.
|
|
|
|
TechPark
|
|
May 31, 2017, 03:15:46 AM |
|
The lastest version is 9.4? but everyone uses 9.2?
why?
What is your source? I am using 9.4
|
|
|
|
TechPark
|
|
May 31, 2017, 03:18:40 AM |
|
Is this normal? Effective Hash Rate / Reported is right at 95% I would say that 95% is a good result. I am getting 90%. Impressive hash rates from 4 workes. Is it 31 Mhs from 1 card? What make and model and settings on them?
|
|
|
|
|