 Show Posts
|
|
Pages: [1]
|
or you are an advertiser for OPTI =)
With 2000 sols you should get more than 0.2/day, most def opti advertiser.  |
|
|
|
I have a MSI Z170A Xpower gaming Titanium Edition mobo with 7 pcie slots, could only get 3 cards to run it, any ideas? Have ASRock H97 Anniversary LGA 1150 as well running 6 290's and Asrock B150A-X1 with 5 slots, but can only get 4 390's to run on it. I've gotten two b150a-x1 to work with 5 cards, you need to set pcie to gen2 for all slots and alocate 3.5gb resources to vgas in bios. Also, disable sound from bios, else you might get no resources available. Last 2 gpu's arrived today and got 5 cards running on b150a-x1. Thank you plenty much christiano88!  |
|
|
|
No idea what the people who have problems do different, but both ZEC miners (Opti and CM) are running stable. I can not really remember when one of these miners crashed (with quite some overclock and on more than a few rigs/GPUs). ETH (especially dual) and XMR are another story, at least for me. And I am talking about Windows...
I have 2 rigs with no overclocks, on both I get 1 card hanging on optiminer. Nice to get almost almost 350 sols more, but I don't need to check if CM 11.1 give problems, I know it's OK. With only 9 cards running I can't afford to leave cards hanging, so opti not working for me and I'm not the only one with this issue. Will use it if miner can run all my cards for days not hours.  |
|
|
|
I optiminer miner does not work, 2 cards do not want to engage in mining that can be  With optiminer there's always a card hanging and I don't want to babysit rigs. CM 11.1 no problems! |
|
|
|
Optminer is better for R9 2xx & R9 3xx I test
I agree 6 290's and 3 390's on optiminer 350 sols more, no overclock!  Optminer with 1 Asus 280x in Suprnova goes 290 / 310 Hashrate/s sure is more than the 250 / 260 with claymore 11.1 with the same 15.12 Claymore 11.1 far more stable, rigs mined for week or more non-stop, switching back to CM!  |
|
|
|
Optminer is better for R9 2xx & R9 3xx I test
I agree 6 290's and 3 390's on optiminer 350 sols more, no overclock! |
|
|
|
who tried to put the new driver 17.1.1 window7 work well in mining or 15.12 drivers. better ?
On Win 10 is not working....have 6x 480 I'm running that driver for 390's for about 5 days now, no problems. Used 16.11.5 before with 1 card hanging regularly. My hashrate still 343-355, all base clocks. |
|
|
|
This is my observation of version 9.2 :
Rx 480 - 235 h/s
Rx 470 - 220 h/s
R9 390 - 300 h/s
R9 290 - 260 h/s
R9 280x - 215 H/s
Also, I have noticed a slight decrease in temperature.
could you please tell me your clocks for the 390 im only getting around 250 with stock clocks and i6 but im having problems with 15.12 drivers in win 10 what drivers do u use thank you for any info or help I have 4 390's underclocked at 975/1500 with power limit at -5 and hashing between 296-300. Crimson 16.11.5.  thats good everyone says 15.12 are the best but since i uninstalled 16.12 my rates have dropped i was using 16.9 for a while and had no issues ill have to go back thanks for the info Pleasure bro! This rig is very unstable when overclocked! |
|
|
|
This is my observation of version 9.2 :
Rx 480 - 235 h/s
Rx 470 - 220 h/s
R9 390 - 300 h/s
R9 290 - 260 h/s
R9 280x - 215 H/s
Also, I have noticed a slight decrease in temperature.
could you please tell me your clocks for the 390 im only getting around 250 with stock clocks and i6 but im having problems with 15.12 drivers in win 10 what drivers do u use thank you for any info or help I have 4 390's underclocked at 975/1500 with power limit at -5 and hashing between 296-300. Crimson 16.11.5. |
|
|
|
MSI Z97A Gaming 6 Intel Z97 Socket 1150 ATX Desktop Motherboard
Will this work the same as Z97 Gaming 5, MSI Z97 Intel LGA 1150 DDR3 USB 3.0 ATX Gaming Motherboard?
Anybody using this mobo yet?
FWIW, I have an older MSI Z97 Gaming 7 and I've gotten 6 GPUs to work with it. Thanx, next rig I'll buy this mobo to try to run 7 cards. |
|
|
|
MSI Z97A Gaming 6 Intel Z97 Socket 1150 ATX Desktop Motherboard Will this work the same as Z97 Gaming 5, MSI Z97 Intel LGA 1150 DDR3 USB 3.0 ATX Gaming Motherboard? Anybody using this mobo yet? |
|
|
|
anyone have any 290's?
240h/s seems to be all I can squeeze. (-i 3)
edit: gpu-z is showing my 480's power draw spikes up to 216w from 120w.
I have 5 asus R9290, keep them on stock clock 1000, used to keep most of them om 1150, but 4 got fried, 2 already replaced and 2 still on their way. I don't push them hard anymore, getting between 225-238H/s at the moment. |
|
|
|
5x470 v8.0->900H/s v9.0->1030H/s nice speed up!!! but... 1000W Navitas gold with 4 undervolted, underclocked (1200/950) 470-s it crashes. i try start v9.0 miner with power limit -35 and -i 4 but no changes, after 1-20 min work system turn off. temporary back to v8.0, with 5x470(~1280/990 -i 6) work stable 5 year old Tagan TG500-U33 with athlon 64 x2, 2Gb ram and 2x290 v9.0 -i 8 ~500H/s cvoltage -37 powlimit+10 1070core/1300mem work absolutly stable Same here for R9 390. I had to reduce the freuquency quite a lot. The v9 uses a 3% more energy and 5% more hash. I'm running 4 R9390 gigbyte G1's on a coolermaster 1500w on Claymore v9.0, no problems with core clock at 1100 with very little rejected shares and 297-299H/s. |
|
|
|
i am facing this problem http://i64.tinypic.com/j9pw02.jpgcheck out GPU1 H/S i tried fresh install drivers with DDU, and tried with diffrent cards also same problem. my 1 gpu always give me bad hashrate also check afterburner ss. and i also tried diffrent pool. but same problem. even i tried with GA-970A-DS3P motherboard and i tried with 5 rx 470 cards also and tried 15.12 drivers too my config MB= gigabyte GA-990FXA-UD3 R5 RAM= 8GB VIRTUAL MEMORY = 16GB PROCESSOR= AMD FX6300 1200WATT PSU Just put screen on card running slow and put it back on preferred card when card is running properly! i m not understand u bro. pls explain more This usually happens when pc reboot and miner restarts. I remove HDMI cable from the usual card and insert it into card that's hashing low, hashes will start to climb on card and than I put HDMI back on coolest card. I used to uninstall driver, but that's a waste of time. |
|
|
|
i am facing this problem  check out GPU1 H/S i tried fresh install drivers with DDU, and tried with diffrent cards also same problem. my 1 gpu always give me bad hashrate also check afterburner ss. and i also tried diffrent pool. but same problem. even i tried with GA-970A-DS3P motherboard and i tried with 5 rx 470 cards also and tried 15.12 drivers too my config MB= gigabyte GA-990FXA-UD3 R5 RAM= 8GB VIRTUAL MEMORY = 16GB PROCESSOR= AMD FX6300 1200WATT PSU Try put in your monitor in GPU1 and see what's happens. . . I had the same problem that work't out for me. i tried it, cards works 15-20 seconds and screen blink and now it showing 0H/S Did you overclock this card? |
|
|
|
i am facing this problem check out GPU1 H/S i tried fresh install drivers with DDU, and tried with diffrent cards also same problem. my 1 gpu always give me bad hashrate also check afterburner ss. and i also tried diffrent pool. but same problem. even i tried with GA-970A-DS3P motherboard and i tried with 5 rx 470 cards also and tried 15.12 drivers too my config MB= gigabyte GA-990FXA-UD3 R5 RAM= 8GB VIRTUAL MEMORY = 16GB PROCESSOR= AMD FX6300 1200WATT PSU Just put screen on card running slow and put it back on preferred card when card is running properly! |
|
|
|
I have a MSI Z170A Xpower gaming Titanium Edition mobo with 7 pcie slots, could only get 3 cards to run it, any ideas? Have ASRock H97 Anniversary LGA 1150 as well running 6 290's and Asrock B150A-X1 with 5 slots, but can only get 4 390's to run on it. I've gotten two b150a-x1 to work with 5 cards, you need to set pcie to gen2 for all slots and alocate 3.5gb resources to vgas in bios. Also, disable sound from bios, else you might get no resources available. Thanx, will try as soon as 2 of my 290 cards come back this week, actually gave up on this mobo to only take 4 cards. If this works I don't have to fire up my MSI mobo for 1 card, have 11 cars at the moment. |
|
|
|
I have a MSI Z170A Xpower gaming Titanium Edition mobo with 7 pcie slots, could only get 3 cards to run it, any ideas? Have ASRock H97 Anniversary LGA 1150 as well running 6 290's and Asrock B150A-X1 with 5 slots, but can only get 4 390's to run on it. What is your PSU? Used it with 1500w coolermaster, psu now on Asrock B150A-X1, ASRock H97 Anniversary LGA 1150 1000w corsiar & 850w raidmax, other mobo just laying around at the moment. |
|
|
|
I have a MSI Z170A Xpower gaming Titanium Edition mobo with 7 pcie slots, could only get 3 cards to run it, any ideas? Have ASRock H97 Anniversary LGA 1150 as well running 6 290's and Asrock B150A-X1 with 5 slots, but can only get 4 390's to run on it.
|
|
|
|
Lost just over 0.4 BTC at terabox, double check everything ever since! |
|
|
|
|
