 Show Posts
|
|
Pages: [1] 2 »
|
nice work man  i hope that you Will support this gui |
|
|
|
With a little bit of reading you would have found EWBF for mining Equihash and Claymore for mining ETH. (please try to read up the forums  ) For XMR, you have to use variant of ccminer aimed at XMR algos like KlausT's version ye whit little reading i got this long time but my question was if there is any other miner that has all in one and its stable like this two miners and that is for NVIDIA, iam not asking what i can mine whit thos miners |
|
|
|
Forum have search function, yeah of course it need time to read...
Thanks to users like you, there is mess on whole forum...
You mr. newbie lf...
but there is function make new post to ask users if they have some info if yes then they can share whit others , cos i dont think that you have readed all sections what you have ever needed till now so pls shhhh |
|
|
|
|
is there all in one miner for nvidia ,thats is suported like ewbf for zec , and the same use like this one
and that i can mine on suprnova
|
|
|
|
|
can i mine eth and monero whit this miner ??
|
|
|
|
use msi voltage/frequency curve editor
that will get you around 80w-85w
is there one good guide or video? |
|
|
|
underclock and/or undervolt
also, your other components draw power as well, not just your GPU, so if your system total is 700w then your gpus should account for ~650w of that
can i uderclock or udervolt in afterburner , i there is other way  You cant undervolt the GTX 10xx series, they are locked by nVidia. You can underpower, for example I have the 1060 3gb cards and I have them running at 85 power in MSI and get the same ZCASH SOL/s as 100 power in MSI afterburner. i tested this and i get at 75 power the same like 100 and 50w less nice , but still how i can get under 100w pro card ? i have tested on my 980 ti on 75 power it the same like 100 . but can i go lower ? |
|
|
|
underclock and/or undervolt
also, your other components draw power as well, not just your GPU, so if your system total is 700w then your gpus should account for ~650w of that
can i uderclock or udervolt in afterburner , i there is other way |
|
|
|
Hello iam runnig 5x msi gtx 1060 6g , and the take around 144w pro gpu all together 700w , i saw post that they have only 80 to 90w pro gpu ,, how can i get that ?? rig 5x msi gtx 1060 6g celerom stock cooler asrock h81 btc pro 8g ram 1250 w chiftech psu ssd win 10 pro and littel screen 700 to 750 w in load |
|
|
|
I see here psu specialists. Molex is 4 pin connector.
You have ~12V yellow cable
GND 2 black ones
1 red with ~5 V
And betwen yellow and red is ~7V
But problem with molex is that have always small cross section.
Or you need other psu or you can try to make custom cables like that:
I am using this in one card (bought psu with not enought 6/8pin pcie cables)
3/4 molex -> 6/8 PCIE connector. And remeber, all molex must have another line, not 1 cable with 3 molex and connected to card <- this still be 1 cable.
I have super flower leadex 1600w GOLD 93+% ef. Have enought cables to use 6 PIN risers and power cards
i have one of this bit like is see he is missing on +12v dc and one gnd then it has to be this that my gpu is not running http://www.ebay.com.au/itm/GIGABYTE-2-x-Molex-to-8-Pin-Power-12CF1-1PW013-11R-Molex-to-VGA-Power-Cable-/281517349096then i need this one http://www.kleinspul.nl/index.php?productID=1819if iam correct ? As you can see this is good cable, but is better to have more 12V cables then GND. In molex allways 2 midle cables are GND. Right one (90 deggres at bottom), is 12V (should be yellow). Good if you have litle skills and can make this cable alone. Buy PCIE 6/8 PIN female connector, 1-2 m good cooper cable, and 2-3 molex and both pins. In my country all cost less then 1 molex -> PCIE connector, and i have guarantees, that i have very good cables that are not hot after 10 min of mining. tnx for all infos but i have bought new psu and it work prfect now and i can add the 6 gpu in my sistem  |
|
|
|
i got on my 1060 6g around 5% increase and 3-4% on 980 ti
Could you please clarify what hash rate do you get out of 980 ti, and what's the power consumption? stock 430 sol/s it was 400 sol/s and it take around 200w from wall its 3 to 4 % if you play whit a afterburner i got 460 to 470 but problems are whit stability |
|
|
|
No real increase on my Asus gtx 1060 3gb 6 card rig but I am noticing that it is alot more steady, I am getting a more consistent 1750. Yesterday I was able to crank all my cards down to 80 power setting and keep the same numbers, around 290 per card.
i got on my 1060 6g around 5% increase and 3-4% on 980 ti |
|
|
|
I see here psu specialists. Molex is 4 pin connector.
You have ~12V yellow cable
GND 2 black ones
1 red with ~5 V
And betwen yellow and red is ~7V
But problem with molex is that have always small cross section.
Or you need other psu or you can try to make custom cables like that:
I am using this in one card (bought psu with not enought 6/8pin pcie cables)
3/4 molex -> 6/8 PCIE connector. And remeber, all molex must have another line, not 1 cable with 3 molex and connected to card <- this still be 1 cable.
I have super flower leadex 1600w GOLD 93+% ef. Have enought cables to use 6 PIN risers and power cards
i have one of this bit like is see he is missing on +12v dc and one gnd then it has to be this that my gpu is not running http://www.ebay.com.au/itm/GIGABYTE-2-x-Molex-to-8-Pin-Power-12CF1-1PW013-11R-Molex-to-VGA-Power-Cable-/281517349096then i need this one http://www.kleinspul.nl/index.php?productID=1819if iam correct ? |
|
|
|
If you have 2 psu's you can connect them with one of these "add2psu" connectors:  Just make sure not to use 2 different psu's on the same gpu. I suggest using only 1 psu per rig unless you know what you're doing though. Not that anyone truly knows what they're doing. nah if psu is problem i will buy new one whit 6 connectors for gpu cos i want to add 2 more gpus on my rig so. tnx any way |
|
|
|
You need 12volts,
pcie is 12 volts... molex is 5 volts.
A pci-e splitter(pcie to 2x pcie) might work...but I highly suggest getting a psu with the proper connectors.
ok tnx any ps that is ok for 6 gpus and normal price chieftec has 1250 w for 188 euros that the cheapest what i now that arent so bad. (and iam EU not USA) so no eggs pls;) |
|
|
|
the ps is modular but has only 4 gpu connector , and 5th card i have powered from molex they go on 6 pin connector at end
This is your problem A 6 pin pci-e line can throw up to 300 watts at 12v a 5 pin molex can only throw 5v which is a huge difference. buy a different psu...don't use molex splitters/converters. If you have to, use an add2psu connector. then from that connector from psu what you can connect hhd, dvd (molex)... you cant run gpus ? like this |
|
|
|
|
i dont get any error i dont see the gpu in device manager only 4 and not 5
|
|
|
|
|
4 gpus take like 550w -+ 50w whit monitor and system at the moment
|
|
|
|
|
Hello
i have build small rig whit 5 x msi gtx 1060 6g i have H81 mb but problem is that i cant get 5gpu online it has power i have powered risers any idea, the 5th gpu is powered from molex its my be tihs a problem , the ps is modular but has only 4 gpu connector , and 5th card i have powered from molex they go on 6 pin connector at end, the gpu has power cos fans are running on her.
mb h81 pro btc
gpus msi gtx 1060 6G
cp celerom
PS chieftec 1000w
ELEGIANT PCI-E Express 1x to 16x Extender Riser Board Card Adapter Riser Karte USB 3.0 Kabel mit SATA you can chek on amazone
Gpu is not dead cos i have placed in other rig and she runs , i have change in bios all to gen1, 2 or auto its the same tested other riser if the first was dead no he is working.
4 gpus are running prefect at 301 to 309 pro card all together 1214 Sol/s
4 gpus take like 550w -+ 50w whit monitor and system at the moment
I dont see the gpu in windows only 4 gpus
sorry for my bad English.
tnx
|
|
|
|
a antminer s9 can do only 0.009 btc a day with 1400w of consumption per hour and cost $2k a gpu mining rig(6x1070) can do 0.011 a day with only 700 watt and cost $2.8k or 0.075 with amd but cost $1.6k ye and what are you mining whit gpus btc or alt coins? 0.011 from what zec , monero , eth? and what amd cards do that ? 1.6k cos iam making 0.016 whit 4x 1060 stock you can't make 0.016 a day with just 4 x 1060, there is no coin paying that much, you are math is probably wrong yes it was zec for nvidia, monero and eth for amd 4x1060 1x980 ti |
|
|
|
|
