Show Posts
|
Pages: [1] 2 »
|
Group Buy for Gridseed 5 Chip units as low as $187 No Accessories Included Escrow Accepted About me: Like you guys I'm a fellow miner looking for the best deals to ROI. When the Gridseeds 1st launched I noticed that the resellers here were charging 100-150% over retail value opted out of that horrible deal, and decided to take matters into my own hands. I did a private group buy with a remailer and a few friends and finally was able to get some gear that will roi. I'm here hosting a GB for you fellow miners that also want a chance to return on investment. Group buy:
Target group buy is 200 Girdseed miners. This group buy is for the Gridseed 5 chip units only. If you need cables, Cablez is currently developing cables that you will be able to hook up to your modular ATX PSU. I will be ordering from him as soon as he releases it. Until then I made this guide to make your own cables https://bitcointalk.org/index.php?topic=518947.new#new. Group buy options: [10 Gs + Raspberry PI]= $1870 Spec: 300-400kh/s for LTC mining. 7-9W/unit.
Payment: BTCitcoin (based on Coinbase) Note: Do not post your payment detail here in comments. I don't need some doosh bag trying to use your payment, and I have to come back and sift through the comments in this thread.Shipping: Packages will be delivered directly from China to minimize shipping wait time, via FedEx. Units will be shipped 1-3 days after the group buy is complete. I will give you a shipping quote when you pm me your order address.How to Order: PM me like so and put order in the subject line Order Amount: Address: Payment: Email:
|
|
|
DIY Gridseed Cables This is more of a what I've done then a Tutorial. I hope it helps . Your responsible for your own units do it at your own risk Supply list 1. Molex connector or PCI-E connector to PSU. (You should have some left over from GPU days or buy online ) 2. Barrel connector to screw terminal. ( http://www.amazon.com/2-1mm-5-5mm-Male-Power-Adapter/dp/B002QWNZHU/ref=sr_1_4?ie=UTF8&qid=1395019577&sr=8-4&keywords=barrel+connector+screw) 3. 18-20 Gauge Speaker Wire ( http://www.amazon.com/AH1850N-feet-18-Gauge-Speaker-Wire/dp/B00005T3G2/ref=sr_1_5?ie=UTF8&qid=1395019797&sr=8-5&keywords=18+gauge+speaker+wire) 4. Electrical Tape Hack Job for Molex1. First cut your wire as long as you need it. Split the 2 conductor speaker wire like I did and expose the wire. Insert the exposed end into the Barrel plug terminals and tighten the screws so that the wire doesn't come out so easily.2. Hack off the black end of the molex power connector, and expose the wires.3. Connect the Speaker wire to the Molex wire, I just twisted the wires together and tape it up with electrical tape. The most Important part is that the speaker wire that is entering the positive terminal of the barrel connector must be connected to the yellow wire of the Molex, and the wire connected to the negative terminal must be connected to the black wire on the Molex connector. If you got the power wires that Lighting Asic sent you for the generic PSU's, the red wire connects with yellow Molex and the white connects with black Molex.4. Connect your Molex to your modular power PSU cord. Note that you can run at least 1-5 Gridseed on one Molex to PSU how ever here I am only going to be using 4 just to be safe. Hack Job For PCI-E1. This is pretty much the same process as the Molex. The only difference I did here is I'm connecting 2 barrel connectors per (yellow and black) wire. 2. You can see here that I actually connected the 2 barrel connectors to one yellow and black pci-e wire.3. 10 barrel connectors on one pcie. I had 6 yellow wires and 6 black on this power cord for my psu. I have 2 singles and 4 doublesFinally Done!!!You can run 4 units like this. I'm not pushing any more than that and wouldn't try it. Check Miaviators thread he states 1-5/molex recommended.10 units can run on this pcie cord. I believe Miaviator stated we can run up to 10-12 on PCI-E.Resource: Maviators Wiring your own Molex or PCI-E power connectors https://bitcointalk.org/index.php?topic=494625.msg5511232#msg5511232Summersideguys Homebrew https://bitcointalk.org/index.php?topic=494625.msg5646315#msg5646315
|
|
|
I have 2 Gridseed controllers the red version for sale brand new. Shipping these to U.S. only. Escrow accepted you pay fee's and shipping cost. Make offer. Will be posting pics soon
|
|
|
Group Buy for Gridseed 5 Chip units as low as $187 No Accessories Included Escrow Accepted About me: Like you guys I'm a fellow miner looking for the best deals to ROI. When the Gridseeds 1st launched I noticed that the resellers here were charging 100-150% over retail value opted out of that horrible deal, and decided to take matters into my own hands. I did a private group buy with a remailer and a few friends and finally was able to get some gear that will roi. I'm here hosting a GB for you fellow miners that also want a chance to return on investment. Group buy:
Target group buy is 200 Girdseed miners. This group buy is for the Gridseed 5 chip units only. If you need cables, Cablez is currently developing cables that you will be able to hook up to your modular ATX PSU. I will be ordering from him as soon as he releases it. Until then I made this guide to make your own cables https://bitcointalk.org/index.php?topic=518947.new#new. Group buy options: [10 Gs + Raspberry PI]= $1870 Spec: 300-400kh/s for LTC mining. 7-9W/unit.
Payment: BTCitcoin (based on Coinbase) Note: Do not post your payment detail here in comments. I don't need some doosh bag trying to use your payment, and I have to come back and sift through the comments in this thread.Shipping: Packages will be delivered directly from China to minimize shipping wait time, via FedEx. Units will be shipped 1-3 days after the group buy is complete. I will give you a shipping quote when you pm me your order address.How to Order: PM me like so and put order in the subject line Order Amount: Address: Payment: Email:
|
|
|
I'm selling this 2.5-2.7MH Scrypt miner. If you want I can set up the batch files so when you receive it all you have to do is plugNplay! I'm willing to part out the gpu's if that's all your interested in. Make your offers brothers, I'll accept BTC, LTC, PPC, and MRC accepting escrow. Specs Motherboard: MSI z77a-gd65 CPU: Intel Celeron G1610 Ivy Bridge Processor Ram: 8Gigs Hard drive: SSD 32Gig Pro SP600 GPU: 4x sapphire radeon 7950 OS: Windows 7 PSU: Lepa 1600 Rack not included
|
|
|
Sup brothers I'v been doing research of reliable freight forwarding services that ship from china.
Do you guys have any good recommendations?
|
|
|
Cryptsy is getting over crowded with shitcoins what coins do you think should be delisted and why? I'll start the list
1. Americancoin: No network support, No development, No marketing 2. 3. 4. 5. 6. 7. 8. 9. 10.
|
|
|
Ok I want to host a contest and rent your hashing power for 20hrs. I want to Start at 11pm(PST) tonight and ending at 7pm(PST) tomorrow. Who ever mines the most coins in the 20hr period is the winner and I will send you a Sapphire Radeon 7950 vapor x with riser the following day. I will create and give contest full access to login to my workers pool account so you can monitor the amount of coins your generating. Each contestant would have there own pool account starting with 0 transactions. You guys will be mining a coin that is not even on coinmarketcap. Please private msg me if your interested in entering the contest.
Requirements/Rules 1. I want to have a minimum of 10 contestants to start the race. 2. Must have a minimum of 8mh/s for scrypt to enter contest. 3. Don't post how much mh/s your entering into the contest in this thread, don't tell other contestants your hashing power, private msg me. 4. Must live in the U.S. I'm only shipping in the U.S 4. Must stop mining at exactly 7pm (PST)
I will keep track of activity of the coins mined by each miner at 5pm, so no cheating. I will take snip shots of amount of coins mined by each worker and post them here where the winner will be displayed. I will send the GPU to the winner the following morning and give them tracking #.
If you have any questions please feel free to ask. I posted this in the miners section but I think market place is more suitable
|
|
|
Ok I want to host a contest and rent your hashing power for 18hrs. I want to Start at 11pm(PST) tonight and ending at 5pm(PST) tomorrow. Who ever mines the most coins in the 18hr period is the winner and I will send you a Sapphire Radeon 7950 vapor x with riser the following day. I will create and give contest full access to login to my workers pool account so you can monitor the amount of coins your generating. Each contestant would have there own pool account starting with 0 transactions. You guys will be mining a coin that is not even on coinmarketcap. Please private msg me if your interested in entering the contest.
Requirements/Rules 1. I want to have a minimum of 10 contestants to start the race. 2. Must have a minimum of 60mh/s for scrypt to enter contest. 3. Don't post how much mh/s your entering into the contest in this thread, don't tell other contestants your hashing power, private msg me. 4. Must live in the U.S. I'm only shipping in the U.S 4. Must stop mining at exactly 5pm (PST)
I will keep track of activity of the coins mined by each miner at 5pm, so no cheating. I will take snip shots of amount of coins mined by each worker and post them here where the winner will be displayed. I will send the GPU to the winner the following morning and give them tracking #.
If you have any questions please feel free to ask.
|
|
|
Stop investing in new copy cat coins like NXT, that ask for your money as initial investment in exchange for shares. Why not to invest after it launches well because your making a share holder rich while he dumps his stash on you. nuff said
|
|
|
Hey Guys I changed the time on my computer and now my wallet is having issues. I get a warning on the bottom of my wallet saying, "Please check that your date and time are correct! If your clock is wrong microcoin will not work properly". I sent all my coins to another working wallet#2 and it did show up but it is stuck at unconfirmed for hours. All the new coins I sent to wallet#2 gets confirmed very quickly, while my other coins are still stuck at unconfirmed
|
|
|
Selling 150k Electriccoin for Goldcoin or Netcoin. PM or comment offers
|
|
|
I noticed all the sha256 coins are much slower than scrypt alts. Is there a reason why no sha256 alts attempt atleast 1 minute block speeds?
|
|
|
Sup guys im trying to mine a scrypt-jane coin right now solo for learning purposes. I have a wallet on my laptop that I want my rig to mine towards do I just plug the IP address of my laptop into this, and have my .bat file use the laptop IP i'v been trying to run this for a while now but its not working.
rpcuser=Mr.v rpcpassword=xgdsgd rpcallowip=MylaptopIP daemon=1 server=1 listen=1 gen=0 port=21333 rpcport=21334 addnode=77.247.181.162 addnode=91.77.102.87 addnode=91.154.202.96 addnode=78.205.83.28 addnode=87.219.35.151 addnode=121.221.31.187
|
|
|
Selling it for 8.5k netcoin or best offer with 2 controlers.. can play any burned games
|
|
|
When reading about alphas new asic coming out a member posted about amd coming out with a new gpu being released in 2014 that will be able to pull 2mh/s a card. I cant recall what name he posted it as, do any of you guys know what the name of the card is?
|
|
|
Anyone want to trade Velocitycoin for Netcoin make your offer
|
|
|
I'm selling this 2.5-2.7MH Scrypt miner. If you want I can set up the batch files so when you receive it all you have to do is plugNplay! I'm willing to part out the gpu's if that's all your interested in. Make your offers brothers, I'll accept BTC, LTC, PPC, and MRC accepting escrow. Specs Motherboard: MSI z77a-gd65 CPU: Intel Celeron G1610 Ivy Bridge Processor Ram: 8Gigs Hard drive: SSD 32Gig Pro SP600 GPU: 4x sapphire radeon 7950 OS: Windows 7 PSU: Lepa 1600 Rack not included
|
|
|
|