C-CEX, this is beyond any limits, where is my LTC, i made a transaction of my LTC 25Hours ago, and on the network it is spent and its not shown in my wallet in C-ECX Wallet, support ticket asking me to get back in Hour(S)m is this is even possible, not having my coins in my wallet and when i am trying to get in contact with Support you are asking me to get back to Make a support ticket in Hourss  ??not even Minutes ? Hours Scammers are much more professional than You by the way !!!!! Get my coins in ASAP in case i am imagining as if you will care to ready my message here ! My Transaction ID: 1567a48f838751f3749eb271791fd8117c16ae6004c1ea03bdc9338b67dc98cc my bloody Wallet at your platform is: LcYzNqYrVWdiUw7bPmtgY5hZS5aUTmTfPm go track it, its delivered since i was a kid !!! Hi, mate! Have you already received your coins in deposit or not? I made deposit of ltc yesterday evening and still there is no on my account. The transaction is confirmed and done in blockchain explorer though.
Yes, man, I have the same situation. Tickets queue is always full and we have no ability to make a ticket. My ltc was transferred to some address too. Maybe they move our ltc to cold storage or something... Maybe they check everything manually and then add the balances to our accounts, I don`t know. It is weekend now and probably they add everything tomorrow. But I need my ltc to get deposited badly as you do, I guess. Please, get me known if you will get your ltc deposited, then I will know that everything is OK. The same thing happened with my BitcoinZ wallet, some transferes during the vacation period and last days and the balance is 20% that I had.., but this when I use the block explorer, because in the C-Chex my balance is 0. Hope that this is just a movement to security storage our coins. |
|
|
|
Hello, nice tip... I’m using the -r 0 config in start.bat and works well... not perfectly, but works.
Well, that is the default, though - you don't need to specify "-r 0" because it will restart when a GPU error occurs or one of the watchdog threads times out. Yeah, you’re right. I was using -r 1 and then changed to 0 and I forgot that is default. Thanks. |
|
|
|
After 6 weeks c-cex today released BiblePay from maintenance mode .. now BBP is actively trading with volume. I just tested the withdrawal process in my acct and it worked. Apparently the c-cex owner does all of the backend work himself to avoid being hacked (which I think happened a couple years ago). It looks like he's slowly getting things fixed.
This situation is good, to protect our investments, but in this kind of situation it’s complicated. But, let’s wait... I’m waiting for a month, wait a little bit more will not kill me... I just wanna know that are hope and our coins will be restored someday. Thanks for your post. |
|
|
|
|
Hello guys, I’m having issues with my BTCz wallet since the vacations. I withdraw my coins in the vacation period and the balance 0 and still in that way until now.
And, I’m not able to open a support ticket. Anyone opened a ticket today?
|
|
|
|
Noob here and kind of late in the game but still want to see how things work.
I have a PC with Windows 10, Intel based with eVGA 980 TI video card. I just downloaded 10.6 version of Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v10.6 (Windows/Linux).
I am getting around 10.70+ Mh/s as shown on the Windows console running "ETHEREUM-ONLY MINING MODE ENABLED"
Is this normal? If not, what can I do get the yield higher?
If things go well, I am thinking of building a rig with 4 GPUs but we will see.
Thanks,
Rick..
Try to use the configs that claymore have. As cclock, mclock. I saw an article about your gpu and the average hashrate is 18.5 mh/s. Another tip that I saw for your card is: “I had the same problem. Go to the control panel, 3d settings, and enable "optimize compute performance".” http://cryptomining-blog.com/tag/gtx-980-ti-ethereum/ |
|
|
|
When monitoring memory errors in HWinfo, how do they relate to mining?
If there are many errors, does that mean I will get lower reward? Shares rejected? Drop in hash speed?
I don't know if the impact is so directly in a short time, as hours... but when I have a GPU with a lot of memory errors (more than 1 million in a few seconds) I'm able to mine just a few hours using this gpu and then the miner restart or hangs and I need to reboot. I think this is the most related problem. |
|
|
|
I'm having trouble since today to connect to any DCR pool. Apparently there was a change in the mining algorithm and all pool now either disconnects me or rejects all my shares.
Anyone else having same problem?
I tried dcr.suprnova.cc:3252 and stratum.decredpool.org:3343
I _have_ been seeing a lot of disconnects over the past 24 hours or so. I thought it was just my 3GB GPU (GTX1060), but it started around two days ago, now. At first I thought it was related to Claymore 10.6 release because the start of the disconnects increase started about the same time I changed from 10.5, but it still happens with the previous version, so that's not related to the problem. Same for me, I have many connection issues, they started also with the release of 10.6 a few days ago, I'm on nanopool. Unfortunately I also stopped dual-mining at the same time so I am not really sure if the problems might be related with this. My Hashrate did go down by more than 30% caused by the connection problems. At the moment I don't have time to check the reason so I simply switched to ethminer for the moment. ethminer has no connection issues at all. I’m using claymore v10.5 and coinmine.pl as DCR pool. I'm not having any problems. Try to change the pool. |
|
|
|
I have always 89 Mh/s, but seems less increase ETH per day
Algoritm more difficult?
Claymore's 10.0
Yes, look this charts https://etherscan.io/chart/difficultyThis is a kind of funny situation, because when the coin’s price rise, more people get interested and start to mine. Sharing the block rewards with more miners each day, do what we are seeing with our eth per day... we are receiving less. |
|
|
|
running win10 (upgraded from win7) with rx 470 (19Mh/s) and rx 580 (22.4Mh/s) with 18.1 drivers (compute mode) and strap timings adjusted on the 470. claymore 10.5 crashes after 2-6 hours of running. Tried 10.1 and the same thing happens. System does not reboot after claymore crash it just waits for me to manually start claymore again. It was working fine under win7 (16.10.2 drivers and only rx 470)... anything I'm missing or is there a log I could check to see why claymore crashed? Thanks.
Did you modded your GPUs bios? Are using a specific setup in claymore for your GPUs? As cclock, mclock? Probably for some reason your card are generating a lot of memory errors and crash time to time. My suggestion, mod you gpu bios, use the blockchain Aug 23 drivers, set the config cclock, mclock, mvddc and cvddc to Rx 580: 1150, 2150, 850, 850 respectively |
|
|
|
running win10 (upgraded from win7) with rx 470 (19Mh/s) and rx 580 (22.4Mh/s) with 18.1 drivers (compute mode) and strap timings adjusted on the 470. claymore 10.5 crashes after 2-6 hours of running. Tried 10.1 and the same thing happens. System does not reboot after claymore crash it just waits for me to manually start claymore again. It was working fine under win7 (16.10.2 drivers and only rx 470)... anything I'm missing or is there a log I could check to see why claymore crashed? Thanks.
I have been having some problem that causes the miner to drop out, and checking the *log*.txt files I don't really find anything consistant as far as why. For the time being, I simply rewrote the "Start.bat" file to remove the ETHDCRMINER64.EXE from the end and replace it with "gomore" and added a "GOMORE.BAT" file that looks like this: @Echo Off ETHDCRMINER64 -param1 xx -param2 xx -param3 xx -paramETC xx . . . . . . gomore ^Z Which calls itself, thus creating an endless loop (break with <CTRL>C) that just jumps back into the miner. For the time being, it works. My problem is curious: sometimes it will run for hours, other times I get an "Unable to create DAG" message requiring an immediate restart. I have no clue ATM, my GPU temps aren't crazy high, snooping around in the log files, I don't see anything obvious that clues me into what's going on (or going wrong), etc   By the way previous question: you can look in the *log*.txt files for clues - or not. I have, but don't have a handle on my problem. I have done due diligence. Nothing obvious. Hello, nice tip... I’m using the -r 0 config in start.bat and works well... not perfectly, but works. |
|
|
|
Hi folks,
i have a strange problem and cant find the solution.
only first card will set clocks and power
AMd 18.1.1
Claymore 10.6
2x AMD 580
i configured the clock and memcock of both cards, and power.
i used syntax: -mclock 2200,2200
and so on.
But only GPU 0 (first one) will comply! gpu z says it is at stock clock
i want to tell her that resistance is futile. any ideas?
thanks a lot
Sometimes this happen with me... try something like this: when the miner start, wait until the last setting dag file and then close the miner. Open again and do the same for 2-3 times. |
|
|
|
Since switching to the new adrenaline drivers, I've found mining just about anything desperately unstable. Temperatures are higher, things are crashing frequently etc. But then on older drivers, I have to install amd settings to change workload to compute, and amd settings sucks.
Just wondering if anyone else is having these problems, and/or if someone could recommend a pre-adrenalin driver that supports more than 10 GPUs and doesn't suck?
Did you try blockchain Aug 23 drivers? I’m using it in my rigs, but I only have 8 gpus in each. |
|
|
|
Hi guys, I'm having problems with my sapphire RX580 nitro+, 8g where the hashrate goes down to 20MH/s from time to time (each 20s- 1 minute) Here is my config : - Claymore 10.0 ( tried 10.3 but same issue ). Eheruem mining only. - 4 x Sapphire RX580 nitro+, 8g . - Windows 10 pro. - amd block chain driver Augst23. - MSI after burner for over clocking (memory 2250, Core 1400). the logs seems okey to me, but I'll put them below maybe u find something I missed 20:35:17:637 4ec ETH: 01/11/18-20:35:17 - New job from eu1.ethermine.org:14444
20:35:17:637 4ec target: 0x0000000112e0be82 (diff: 4000MH), epoch 163(2.27GB)
20:35:17:637 4ec ETH - Total Speed: 127.518 Mh/s, Total Shares: 5212, Rejected: 0, Time: 47:00
20:35:17:637 4ec ETH: GPU0 31.875 Mh/s, GPU1 31.895 Mh/s, GPU2 31.853 Mh/s, GPU3 31.895 Mh/s
20:35:22:106 4ec send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x7992b40", "0x00000000000000000000000000000000000000000000000000000000087ce52f"]}
anyhelp would be much appreciated I think that are you putting so much power in your GPUs and for some reason the speed drops... what kind of PSU do you have, maybe is something with the energy supply from the PSU... I have 3 rigs with those cards, and my perfect conf was 1250 2250... depending of the GPU I need to put less power as 1200 2000 or 1150 2150. Thank you for the reply. I'm using Seasonic P-860 Platinum 80PLUS Platinum (860W) with 4 GPU. I believe it's more than enough sense one GPU is consuming around 145W. Can you share your setup ? are u running them at 31.8... MHash/s ! In each rig I have 2 psu EVGA 750w Gold, supplying power for 8 GPUs. So to achieve the best config, I modded the bios (there are a plenty of places to download the bios for theses cards) and with these setup: cclock 1250, mclock 2250, cvdd 850 and mvdd 850 To run perfectly you need to put less voltage in your card, otherwise will stress a lot of your PSU... in you case, 4 GPUs consuming 145w is to much for this PSU, as the efficiency probably is not more than 90%. Doesn't sound correct what you just said. 4 GPU consume (145X4) = 580W and lets say the other component consume 200W, this will give a total of 780. With a 860W platinum rated PSU, it is far enough from it's limit. 90% power efficiency means how much the PSU will consume to generate the desired power in it's output !!.. I have added another one and put 3 gpu in the first PSU and 2 others in the second (added new gpu) and still having the same problem..I dobut that the problem is caused by the mother board (biostar btc 250).... Will keep you updated thx Make sense... as you tried another psu and the problem still happening, for sure need it more investigation. Try to set the cclock, mclock, mddvc and cddvc in the claymore bat file, try different config for each card... execute claymore and at the same time check the gpu errors with HWiNFO64. I use this tool to setup the config for each card. Good luck! |
|
|
|
Hello,
my pc freezez or one random gpu hashrate reports 0 mh/s when i use claymore undervoltage commands and clock with my rx 580 nitro + in dual mine eth+pasc. My hash rates are 30mh/s/gpu. Any of you have this problem? If so do you have any suggestion? Here is my .bat file.
TIMEOUT 40
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal 0x0200BA73CA49Aa286570588A055396bc0C0d4087.rig1/email@gmail.com -epsw x -dpool stratum+tcp://pasc-eu1.nanopool.org:15555 -dwal 274485-29.0.rig1/email@gmail.com -dpsw x -dcoin pasc -dcri 10 -mode 0 -tstop 85 -tt 65 -fanmin 70 -fanmax 100 -cclock 1130 -mclock 2150 -cvddc 875 -mvddc 875 -ftime 10
Try different config for each card, they aren’t equal... a good config for RX 580 is: 1150, 2150 with 900 of voltage. But I have 2 cards that I need to lower the mclock to 2135 and the voltage 950, otherwise they hangs. |
|
|
|
I have troubles with my 6x rx 580 rig:
While the settings are ok and I did successfully flash the bios, seems that I still have to apply voltages using wattman.
Any idea why I am unable to set them from my start.bat?
timeout /t 15
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal mywallet.Rig1 -epsw x -r 1
-cclock 1200,1200,1200,1200,1200,1200
-mclock 2200,2200,2200,2200,2200,2200
-cvddc 900,900,900,900,900,900
-mvddc 900,900,900,900,900,900
Any help is much appreciated, thx.
Are you using claymore 10.5? If yes, sometimes I need to open and close the claymore bat for 2-3 times to set correctly the configs. Open, wait the last setting dag file and close. Do it for more 2-3 times. |
|
|
|
Having some stability issues that I think is down to oc settings. One or two of my rx580s seem to run a bit hot (70C) and occasionally crash or claymore crashes. Current oc settings are 1150/2000 with 820mv across the board. I'm happy enough to sacrifice a little hashrate for stability and lower temps.
Any ideas?
I think you pretty much answered your own question. Not all cards are created equal, it can be a bit of a lottery even with 'identical' cards. You'll probably just have to accept a lower hashrate from the renegade card. Yeah, that's what I suspected. Thanks for that. If I'm aiming for stability, where should i start? Mem clock, core clock or voltage? Try the voltage, for this mclock try 850mv. Another setup: 1150,2150,850mv... In my rigs this config works fine! |
|
|
|
Having problems with dual mining ETH wit dcr..dcr s not getting connected to the pool..til this morning it was running fine...any changes into settings..can anybody let me know..
Did you check if the pool is up? Because I updated to the las claymore version 10.5 and I do dual mining (ETH + DCR) and everything is fine. I’m using coinmine.pl for DCR. |
|
|
|
Hi guys, I'm having problems with my sapphire RX580 nitro+, 8g where the hashrate goes down to 20MH/s from time to time (each 20s- 1 minute) Here is my config : - Claymore 10.0 ( tried 10.3 but same issue ). Eheruem mining only. - 4 x Sapphire RX580 nitro+, 8g . - Windows 10 pro. - amd block chain driver Augst23. - MSI after burner for over clocking (memory 2250, Core 1400). the logs seems okey to me, but I'll put them below maybe u find something I missed 20:35:17:637 4ec ETH: 01/11/18-20:35:17 - New job from eu1.ethermine.org:14444
20:35:17:637 4ec target: 0x0000000112e0be82 (diff: 4000MH), epoch 163(2.27GB)
20:35:17:637 4ec ETH - Total Speed: 127.518 Mh/s, Total Shares: 5212, Rejected: 0, Time: 47:00
20:35:17:637 4ec ETH: GPU0 31.875 Mh/s, GPU1 31.895 Mh/s, GPU2 31.853 Mh/s, GPU3 31.895 Mh/s
20:35:22:106 4ec send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x7992b40", "0x00000000000000000000000000000000000000000000000000000000087ce52f"]}
anyhelp would be much appreciated I think that are you putting so much power in your GPUs and for some reason the speed drops... what kind of PSU do you have, maybe is something with the energy supply from the PSU... I have 3 rigs with those cards, and my perfect conf was 1250 2250... depending of the GPU I need to put less power as 1200 2000 or 1150 2150. Thank you for the reply. I'm using Seasonic P-860 Platinum 80PLUS Platinum (860W) with 4 GPU. I believe it's more than enough sense one GPU is consuming around 145W. Can you share your setup ? are u running them at 31.8... MHash/s ! In each rig I have 2 psu EVGA 750w Gold, supplying power for 8 GPUs. So to achieve the best config, I modded the bios (there are a plenty of places to download the bios for theses cards) and with these setup: cclock 1250, mclock 2250, cvdd 850 and mvdd 850 To run perfectly you need to put less voltage in your card, otherwise will stress a lot of your PSU... in you case, 4 GPUs consuming 145w is to much for this PSU, as the efficiency probably is not more than 90%. |
|
|
|
|
I choose Ethereum, because the bitcoin network is almost speculative... and I think ETH will be more for long term investments.
|
|
|
|
|
Hello guys, welcome back!
When you have time, if is possible look to my account, I have a wallet with btcz and I did a withdrawal when you were in vacation and my balance disappeared.
Wallet: t1R21WL5CrAFkhrWw7y7nFf5gQ2HGcuEwec
I’d like to cancel then withdraw and keep my coins in my wallet.
Thanks!
|
|
|
|
|
Show Posts
