|
What did you do? As your post was 4 months ago. Did you sell it or hold it?
Now the market is recovering from another situation like you describe... and I've experienced the same thing... I just hold, nothing else.
|
|
|
|
WARNING TO ALL WHO ARE USING OR ARE GOING TO USE STOCKS.EXCHANGE -- DO NOT USE IT YOU WILL BE SCAMMED -- So the CEO from Stocks.Exchange which is having alot of issues (scam) with people depositing and withdrawing coins and alot of glitchy API entries on their exchange has promoted this scam VESA ICO through his own Stocks.exchange platform by sending out an email to invest in this shit. If we go look at the CEO from Stocks.Ex his old twitter profile we can look at a certain post: https://twitter.com/vkurylovych/status/20733090372 the one and only reply on there already refers to a scam pulled with a platform called livirtual.com The two tweets that are also still visible on his twitter profile just underneath the one i just linked contain the following messages: Vadym Kurylovych @vkurylovych 18 apr. 2010 If you wanna be rich you got to be a bitch Smiley and Vadym Kurylovych @vkurylovych 21 mar. 2010 Never feel sorry for people Now here comes the interesting stuff. The same guy who is CEO of Stocks.Ex and a Dev or whatever he calls himself from Paragoncoin which is also an ICO which hasn't delivered what it has promised AND can also be traded on the very same exchange the CEO DEV SCAMMER whatever you want to call it hosts. If we go take a look at the current twitter page of Stocks.Exchange https://twitter.com/StocksExchangeR and we click open any recent tweet, and with recent we can go back at least 2 weeks from the day this post was created, you will see announcements of certain things going wrong, and being fixed (while they aren't fixed). We see people complaining about stuck funds for over 10 days while the blockchain explorers show those coins already confirmed hundreds if not thousands of times and even being redistributed to other wallets, we can start to scratch our head again can't we? If we go look back into their tweets and check this one out: https://twitter.com/StocksExchangeR/status/951796262910783488 we can even see Stocks.Exchange blaming Coinsmarkets for creating issues with Stocks.exchange this is by far the lamest excuse I have seen in 2018 and should ring another warning bell. So the person or persons behind all this are either scammers or complete idiots who have no idea how to work with computers. I doubt it's the second one. If we go check the SE CEO lead Scammer's profile on Linkedin we can see calls himself a "jack of all trades" https://www.linkedin.com/in/vadym-kurylovych/ while he's actually a trader of all jacks. What else can be said about Stocks.Exchange? Well there will be liquidity issues if there aren't already. I myself can confirm that the exchange has had multiple reports of double deposits or withdraws. Now for those who are on the receiving end of those double deposits and withdraws it's their lucky day. But in the end someone will pay for this and imo the exchange won't be touching their own funds to keep it solvent. The most flagrant mistake made by SE that has come to my ears is someone who tried to withdraw 2 BTC and received that amount 3 times. Now you can say they were playing Santa Claus and they are good guys, but in the big perspective of things this should not happen and it might be the first signs of things going down hill pretty fast for this exchange and everything tied to it. On to other side there are hundreds if not thousands of users who are having issues not receiving their coins for a period of over 10 days without a reply to their support tickets, emails or even on the Stocks Twitter profile when a tweet is replied to by angry customers nobody answers them with a satisfying answer, there isn't even an answer at all from SE. Just tweet after tweet that they are fixing the issues and when they claim something is fixed, we can see that it's broken again 5 minutes later meaning it wasn't fixed at all. Any other exchange would have been called out for scam a long time ago, but somehow they manage to keep fooling people and sucking in more users who they ar stealing money from. Imagine you had made a trade on SE right after New Year, you made some good profit and are now ready to cash that out. Oops withdraw issue, ongoing for 2 weeks, meantime the market dipped and people are unable to sell their profits and are now even losing money because the guys behind this ICO and other scam ICO's are running a dodgy Exchange that will end up insolvent and running off with people's money. So for the people who were ready to invest in this next Scam from the same guys, please check the facts I present to you and think twice. Also those who are thinking about depositing funds to Stocks.Exchange, my advise to you is to look elsewhere. Is your coin of interest only listed on that exchange, make sure the Dev team from your favourite coin get's to read this post, let them research it and make a move out of there once they are convinced that what I tell you here is the truth. Your sincerely H055Y PS: Vadym Kurylovych you better don't show your face in public, because alot of angry traders would like to rip your face off. All paranoia aside, almost every exchange is having issues. They are not prepared for the influx of new users. I have been using stocks.exchange for a few months now with no issues, but lately, it has gotten really slow. I agree with you, I'm using stocks.exchange for a few months and just now I'm having issues and I belive that the problem is the influx of new users... as example my withdraw of ELLA took more than a day to be done... but after that everything was perfect. |
|
|
|
|
My suggestion is to be patient and hold your coins, the crypto marketing continues to grow... of course sometimes some issues happened and lets us down, but I consider everything as a long term investment.
|
|
|
|
try mining with no dev fee and see if it helps
I'll try this, but I would rather be able to mine with fee. try the option: "-allpools 1" I don't know if solve the problem, but I read sometime here in this thread this suggestion. |
|
|
|
Hello i have this problem with 1 of the cards in my rig.
Its a 7 card rig.
GPU hangs in OpenCL call, exit error
I have try alot of things. Right now i run
-epsw x -mode 1 -cclock 1200,1200,1200,1200,1200,1200,1200 -mclock 2250,2250,2200,2200,2250,2200,2250, -cvddc 880,850,850,850,850,850,850 -mvddc 920,900,900,900,900,900,900 -gser 8 -dcri 5 -wd 0 -ftime 10 -lidag 3,0,0,0,0,0,0 -tstop 85 -tt 60 -fanmin 10 -fanmax 100
It is GPU0 there get this error. Any ideas? It can happen after minutes or hours
you should try lowering mem clock for the GPU that fails. Also why do you think that setting core volts lower then vrm would work? I have also try -epsw x -mode 1 -cclock 1200,1200,1200,1200,1200,1200,1200 -mclock 2000,2250,2000,2000,2000,2200,2250, -cvddc 960,900,900,900,900,900,900 -mvddc 960,900,900,900,900,900,900 -gser 8 -dcri 5 -wd 1 -ftime 10 -lidag 3,0,0,0,0,0,0 -tstop 85 -tt 60 -fanmin 10 -fanmax 100 But its the same. I think i will try to buy some other raisers. 009 from https://bitcointalk.org/index.php?topic=2745606.0At the moment i have https://www.amazon.de/gp/product/B073F1QHZ5/ref=ox_sc_sfl_title_1?ie=UTF8&psc=1&smid=ATVCPMRF6NI2O But i think they are shit Change the riser is your best option, but could be a problem in GPU, I had this problem once... try something like this: -epsw x -mode 1 -cclock 1150,1200,1200,1200,1200,1200,1200 -mclock 2150,2250,2200,2200,2250,2200,2250, -cvddc 950,850,850,850,850,850,850 -mvddc 950,850,850,850,850,850,850 -gser 8 -dcri 5 -wd 0 -ftime 10 -lidag 3,0,0,0,0,0,0 -tstop 85 -tt 80 -fanmin 45 -fanmax 100 or -epsw x -mode 1 -cclock 1200,1200,1200,1200,1200,1200,1200 -mclock 2200,2250,2200,2200,2250,2200,2250, -cvddc 1000,900,900,900,900,900,900 -mvddc 1000,900,900,900,900,900,900 -gser 8 -dcri 5 -wd 0 -ftime 10 -lidag 3,0,0,0,0,0,0 -tstop 85 -tt 80 -fanmin 45 -fanmax 100 ---- to confirm that the setup stick in the gpus, start claymore, wait until the last DAG creation file and then close the software... do this 2 more times. if GPU0 continues getting error... change it riser with other gpu and try to put other card in GPU0. |
|
|
|
Did you run atikmdag-patcher after bios mod? Otherwise you will have problems with driver signature in Windows. |
|
|
|
Please help me, I´m suffering from low hash speeds with Claymore. System: - ASRock H110 BTC mobo - Celeron G3930 - 4GB DDR4 2133MHz stick - 64GB Adata SATA SSD - Cooler master Silent Pro 800W - 2pcs ASUS Radeon RX570 4GB Expedition Windows 10 Pro + AMD Blockchain drivers ETH Hashspeed is max 15MH/s per card  Any idea what should i do next? Did you bios modded your GPUs? If yes, what it’s you claymore config? Probably you need to setup cclock, mclock, mvddc and cvddc. |
|
|
|
new Claymore 10.4 have issue with blockchain driver ?
I’m using in Windows 10 with blockchain Aug 23 drivers and its working perfect. |
|
|
|
Hello, i Have 2 RX580 Samsung memory (modded for mining) I am using Claymore for ETH and Decred, so dual ming with GPU0 and GPU1. This is the code I use setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
C:
cd C:\miner
C:\miner\ethdcrminer64.exe -epool eu1.ethermine.org:4444 -ewal xxx -epsw x -dpool dcr.suprnova.cc:3252 -dwal xxx -dpsw x -dcri 20 -tt 70 -tstop 85 -fanmin 50 -fanmax 100 -mvddc 850,850 -cvddc 850,850 -mclock 2150 -cclock 1130 All the value set by the command line are accepted by the GPU0, minimum fan voltage etc etc. Temp OK, Fan Ok  The problem is on the second GPU (#1). It seems that value are not accepted and I'm not able to undervoltage it.  The voltage remains to 1,15V, no minimum fan and temp get worst as soon as I start the miner script. What could be the problem? I have also tried both to double all the value (mvdcc cvddc etc etc) bot the let them single, but with no luck, Same voltage on the GPU1. The strange thing is that If i use both GPU in single mode (so i disconnet one GPU at a time), all the value are perfectly set. If I try to use at the same time, the second GPU1 doesnt get the valure imposed on command line. I've also tried to use previous version of claymore but the error remains. Thanks for your time to read this. Try something like this: ethdcrminer64.exe -epool eu1.ethermine.org:4444 -ewal xxx -epsw x -dpool dcr.suprnova.cc:3252 -dwal xxx -dpsw x -dcri 20 -tt 70 -tstop 85 -fanmin 50 -fanmax 100 -cclock 1130,1130 -mclock 2150,2150 -cvddc 850,900 -mvddc 850,900 Change the voltage for the second GPU, in my case I have the same brand, memory and bios modded... but I cant put the same configs, GPU doesn't accept. Another thing that works for me... lunch the mine sfw and after start mine, close and open claymore... 3 times... in some cases when the config didn't get, I do that and works. |
|
|
|
I'm having trouble with temperature 511 error. It happened randomly and miner hang without reboot. Please help!  19:06:05:050 1b84 new buf size: 0 19:06:07:752 1af4 GPU 1: got incorrect temperature 511, ignore 19:06:07:843 1af4 GPU 2: got incorrect temperature 511, ignore 19:06:11:470 1af4 GPU 1: got incorrect temperature 511, ignore 19:06:11:562 1af4 GPU 2: got incorrect temperature 511, ignore 19:06:14:926 1b84 got 248 bytes 19:06:14:926 1b84 buf: {"id":0,"jsonrpc":"2.0","result":["0xdcb409175e4740a26434b7089a94ad3e37ce77a55858062583924b2c82cd128f","0xec6e8e0d8056cf9eb61046eaeb754b8e71f48e10a86c61f4d287b4ac5244653f","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4adfaa"]} 19:06:14:926 1b84 parse packet: 247 19:06:14:926 1b84 ETH: job changed 19:06:14:926 1b84 new buf size: 0 19:06:14:926 1b84 ETH: 01/14/18-19:06:14 - New job from asia1.ethermine.org:4444 19:06:14:926 1b84 target: 0x0000000112e0be82 (diff: 4000MH), epoch 163(2.27GB) 19:06:14:926 1b84 ETH - Total Speed: 127.854 Mh/s, Total Shares: 3019, Rejected: 0, Time: 17:52 19:06:14:926 1b84 ETH: GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 31.959 Mh/s, GPU4 31.968 Mh/s, GPU5 31.962 Mh/s, GPU6 31.964 Mh/s 19:06:15:019 1b84 ETH: checking pool connection... 19:06:15:019 1b84 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"} 19:06:15:066 1b84 got 248 bytes 19:06:15:066 1b84 buf: {"id":3,"jsonrpc":"2.0","result":["0xdcb409175e4740a26434b7089a94ad3e37ce77a55858062583924b2c82cd128f","0xec6e8e0d8056cf9eb61046eaeb754b8e71f48e10a86c61f4d287b4ac5244653f","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4adfaa"]} 19:06:15:066 1b84 parse packet: 247 19:06:15:066 1b84 ETH: job is the same 19:06:15:066 1b84 new buf size: 0 19:06:15:194 1af4 GPU 1: got incorrect temperature 511, ignore 19:06:15:290 1af4 GPU 2: got incorrect temperature 511, ignore I got this error once, and to fix I changed the riser and the PSU energy cable of the riser. It's was the only way to solve the problem... if you don't have an extra riser, try just change the psu energy cable of the riser. |
|
|
|
After windows Fall update my ETH mining speeds dropped off dramatically.
I upgraded to 10.3 and tried to reinstall the 17.2.1 AMD drivers. Still no help on speed.
Any suggestions?
Do you enabled the GPU Worload config to compute on AMD Radeon Settings? Probably Is this. On my computer at home I have a Sapphire RX 580 Limited Edition and it was only mining at 14 Mh/s. I changed the driver to blockchain compute mode and it was mining over 20 Mh/s. Since it is on my regular, daily use computer I have not modded the bios. Try to set cclock, mclock, cvddc and mvddc .. in this gpu you may use the silent bios to mod a better bios, otherwise will be difficult get more than 20-24 mh/s I have one of this card, and I use the config: cclock 1250 mclock 2250 mvddc/cvddc 850 |
|
|
|
After windows Fall update my ETH mining speeds dropped off dramatically.
I upgraded to 10.3 and tried to reinstall the 17.2.1 AMD drivers. Still no help on speed.
Any suggestions?
Do you enabled the GPU Worload config to compute on AMD Radeon Settings? Probably Is this. |
|
|
|
Does voltage control work with v10 in blockchain drivers or any of the 17.10.x drivers?
I'm using voltage control mvddc and cvddc since v10 with Blockchain drivers Aug 23... now I'm using v10.3 and everything is perfect. what version of windows do you have? , mine got slammed with fall creation 1609. Cant change voltage with Afterburner 4.4 beta 16 either I'm in nicehash 1.8.6 which uses claymore 10.3, but cant control with claymore 9.7 on Nicehash 1.8.0 either My windows is 10 with fall creation installed. I'm not using Afterburner, just claymore and mining direct to ethermine pool. Follow my claymore config, just to you see how I setup each card: setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal YourWallet -epsw x -mode 0 -esm 0 -asm 1 -r 0 -allpools 1 -ftime 10 -tstop 85 -tt 65 -fanmin 45 -fanmax 100 -cclock 1250,1150,1150,1150,1150,1150,1150,1150 -mclock 2250,2150,2150,2150,2150,2150,2150,2150 -cvddc 900,850,850,850,850,850,850,850 -mvddc 900,850,850,850,850,850,850,850 -ttdcr 80
|
|
|
|
Does voltage control work with v10 in blockchain drivers or any of the 17.10.x drivers?
I'm using voltage control mvddc and cvddc since v10 with Blockchain drivers Aug 23... now I'm using v10.3 and everything is perfect. |
|
|
|
hello..i tried to mine ethereum i get 60.9 mhs wit 2 rx580 armor...but whn i start dual mining wit eth+dcr the eth hashpower decreaes to 55mhs..
can anybody suggest a good dcri setup so tht my etg hashpower s not effected...
Try the option -dcri 24, this was the best config for my RX 580 armor dual mining (ETH+DCR). To test use the +/- keys of your keyboard to adjust the dcri option. |
|
|
|
Today a group that I participate will do a pump, in 6 hours. If you wanna join by your own risk: https://discord.gg/Wdgj58[url]]]https://discord.gg/Wdgj58[url][/url] The moderator of the group is very fair, and usually they do pumps for everyone without distinction, using Telegram... it's not easy to win money, because you need to bem fast. |
|
|
|
|
O ideal seria entrar na cryptopia e começar aparecer no coinmarketcap.
Vocês já fizeram a solicitação?
|
|
|
|
|
Show Posts
