|
Is this set up to mine the modified XMR algo?
|
|
|
|
|
Just ordered my first M10-31T from Pangolin with the $51 coupon. Will get to see how it compares to the T15's I have in terms of noise and stability. Given the glowing reviews from other members I am expecting good things! Will likely remove 3 821's from the rack to make room power-wise.
|
|
|
|
|
According to the BitDeer website, they have an L5 on offer. So assuming that isn’t made up marketing by BM, they have an unreleased scrypt miner.
Specs as quoted:
1473 MH/s
1425 W
0.97 J/MH
|
|
|
|
My miner mined for about 10 minutes when I first plugged it in and now I just get spinning circles in the Miner Status page. THe Miner log looks like is trying to log in. Im not sure what is wrong. I thought the slushpool password might be wrong but I guess that's just arbitrary. Does anyone know what is wrong?
Have you tried another pool? Are you mining behind a proxy/vpn? Which addresses have you tried for slushpool? Do you have different addresses filled in for the Pool 0, 1, 2? For slush I use these addresses in case a node goes down: stratum+tcp://us-east.stratum.slushpool.com:3333 stratum+tcp://ca.stratum.slushpool.com:3333 stratum+tcp://eu.stratum.slushpool.com:3333 |
|
|
|
|
Personally, my set up is too small and is located within the server room of my existing business which is in an office building. So unfortunately, I do not have the option to deploy my own solar. In addition, the relatively small size and colocated nature of my mine does not give me any option other than the local power company.
If I had the choice you presented, I would have to calculate which would be most advantageous tax-wise. Electricity costs are deductible so depending on how much gear I plan on purchasing this year I would look at projected electricity costs to make sure I minimize my tax burden. If its even remotely close in terms of final costs, I would choose the hydro/green power.
|
|
|
|
|
With this new cgminer option added, I can now how full use (no temp sensors) of my R4 with Braiins! Everything else works, and I'm now running at 630 freq, 9.1v, and 9TH.
|
|
|
|
Quote of changes implemented by these new FW's (same for T/S15): Add low temperature protection function
Security issues fixed
Below is the startup sequence immediately after upgrading to the newest firmware: Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 197300K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 32076K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 19036K (cc869000 - cdb00000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x000002420000
nand_read_bbt: bad block at 0x000002440000
nand_read_bbt: bad block at 0x000002460000
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1612620144
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 657494A9-6816-44F8-9CFC-4645028DD4A2, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 282/177, WL threshold: 4096, image sequence number: 671793871
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID B5297183-49EC-4496-895A-CD02D5F99059, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb34000
*base_vir_addr = 0xab00d
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
[2019-02-28 15:15:15.736] httpListenThread start ret=0
[2019-02-28 15:15:45.737] start listen on 6060 ...
[2019-02-28 15:20:52.439] set_start_time_point total_tv_start_sys=357 total_tv_end_sys=358
2019-02-28 15:15:15 driver-btm-soc.c:7206:init_freq_mode: This is scan-user version
2019-02-28 15:15:15 driver-btm-soc.c:7709:bitmain_soc_init: T15
2019-02-28 15:15:15 driver-btm-soc.c:7710:bitmain_soc_init: opt_multi_version=1
2019-02-28 15:15:15 driver-btm-soc.c:7711:bitmain_soc_init: opt_bitmain_ab=1
2019-02-28 15:15:15 driver-btm-soc.c:7712:bitmain_soc_init: opt_bitmain_economic_mode=false
2019-02-28 15:15:15 driver-btm-soc.c:7584:_show_sn: no SN got, please write SN to /nvdata/sn
2019-02-28 15:15:15 driver-btm-soc.c:7237:init_phy_mem_nonce2_jobid_address: Detect 256MB control board of XILINX
2019-02-28 15:15:15 driver-btm-soc.c:7719:bitmain_soc_init: Miner compile time: Mon Feb 25 11:17:06 CST 2019 type: Antminer T15
2019-02-28 15:15:15 driver-btm-soc.c:7721:bitmain_soc_init: last commit version: 276a2d2 commit time: 2019-02-23 14:47:27 build: 2019-02-25 11:22:43
2019-02-28 15:15:15 driver-btm-soc.c:7268:check_fan_multi: check fan for 20 times...
2019-02-28 15:15:17 driver-btm-soc.c:7767:bitmain_soc_init: miner ID : 8174f42429e04814
2019-02-28 15:15:17 driver-btm-soc.c:7337:init_miner_version: FPGA Version = 0xB00D
2019-02-28 15:15:17 driver-btm-soc.c:1059:check_chain: get_hash_on_plug is 0x7
2019-02-28 15:15:17 driver-btm-soc.c:1071:check_chain: !! chain[0]is exist
2019-02-28 15:15:17 driver-btm-soc.c:1071:check_chain: !! chain[1]is exist
2019-02-28 15:15:17 driver-btm-soc.c:1071:check_chain: !! chain[2]is exist
2019-02-28 15:15:20 eeprom.c:1408:eeprom_load: eeprom load chain [0]
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00000000 7f ac 58 5e 5e 5b 5e 5e 5b 5e 5e 58 5b 5e 5e 58
00000010 5e 5b 58 5e 5e 5e 5e 5e 5e 58 5b 5b 58 5e 5e 5e
00000020 5e 5e 5e 5b 58 5e 5e 5e 58 5b 5e 5e 5e 5b 58 58
00000030 5e 5e 5b 5e 5e 5e 5e 5b 58 58 5b 5e 5e 5e ff ff
00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff 8e 1b
00000070 00 00 ff ff ff ff ff ff ff 00 04 0b 00 0f 00 2d
00000080 00 2d 00 ff ff ff ff ba 65 65 65 65 65 65 65 65
00000090 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65
000000a0 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65
000000b0 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65
000000c0 65 65 65 65 ff ff ff ff ff ff ff ff ff ff ff ff
000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
000000f0 ff ff ff ff 36 1e 00 00 ff ff 01 01 01 00 cd dd
2019-02-28 15:15:22 eeprom.c:1408:eeprom_load: eeprom load chain [1]
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00000000 7f ac 58 5b 5b 5b 5b 5b 5b 58 5b 5b 5b 58 5b 5b
00000010 5b 58 5b 5b 5b 5b 5b 5b 58 5b 5b 58 5b 5b 5b 5b
00000020 5b 5b 5b 5b 58 5b 5b 5b 5b 58 5b 5b 5b 58 5b 5b
00000030 5b 58 5b 5b 58 5b 5b 5b 5b 58 5b 5b 5b 5b ff ff
00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff fd 1a
00000070 00 00 ff ff ff ff ff ff ff 00 04 0b 00 0f 00 2d
00000080 00 2d 00 ff ff ff ff ba 66 66 66 66 66 66 66 66
00000090 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66
000000a0 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66
000000b0 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66
000000c0 66 66 66 66 ff ff ff ff ff ff ff ff ff ff ff ff
000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
000000f0 ff ff ff ff 75 1e 00 00 ff ff 01 01 01 00 10 76
2019-02-28 15:15:25 eeprom.c:1408:eeprom_load: eeprom load chain [2]
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00000000 7f ac 5e 5e 5e 5b 5b 5b 5b 5e 5e 5e 5e 5e 5e 5b
00000010 5b 5b 5b 5e 5e 5e 5b 5e 5b 5e 5e 5e 5e 5e 5b 5b
00000020 5e 5e 5e 5b 5b 5e 5e 5b 5e 5b 5e 5e 5b 5e 5b 5e
00000030 5e 5e 5b 5b 5e 5e 5e 5b 5b 5b 5e 5e 5e 5b ff ff
00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff be 1b
00000070 00 00 ff ff ff ff ff ff ff 00 04 0b 00 0f 00 2d
00000080 00 2d 00 ff ff ff ff ba 66 66 66 66 66 66 66 66
00000090 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66
000000a0 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66
000000b0 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66
000000c0 66 66 66 66 ff ff ff ff ff ff ff ff ff ff ff ff
000000d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
000000e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
000000f0 ff ff ff ff 77 1e 00 00 ff ff 01 01 01 00 e1 80
2019-02-28 15:15:25 eeprom.c:1417:eeprom_load: done
2019-02-28 15:15:25 driver-btm-soc.c:7358:init_pcb_version: chain[0] PCB Version : 0x0101
2019-02-28 15:15:25 driver-btm-soc.c:7377:init_pcb_version: chain[0] BOM Version : 0x0100
2019-02-28 15:15:25 driver-btm-soc.c:7358:init_pcb_version: chain[1] PCB Version : 0x0101
2019-02-28 15:15:25 driver-btm-soc.c:7377:init_pcb_version: chain[1] BOM Version : 0x0100
2019-02-28 15:15:25 driver-btm-soc.c:7358:init_pcb_version: chain[2] PCB Version : 0x0101
2019-02-28 15:15:25 driver-btm-soc.c:7377:init_pcb_version: chain[2] BOM Version : 0x0100
2019-02-28 15:15:26 dspic33ep16gs202.c:545:reset_pic: chain[0] ok
2019-02-28 15:15:30 dspic33ep16gs202.c:509:jump_to_app_from_loader: chain[0] ok
2019-02-28 15:15:31 dspic33ep16gs202.c:545:reset_pic: chain[1] ok
2019-02-28 15:15:35 dspic33ep16gs202.c:509:jump_to_app_from_loader: chain[1] ok
2019-02-28 15:15:36 dspic33ep16gs202.c:545:reset_pic: chain[2] ok
2019-02-28 15:15:40 dspic33ep16gs202.c:509:jump_to_app_from_loader: chain[2] ok
2019-02-28 15:15:40 power.c:124:power_init: power init ...
2019-02-28 15:15:40 driver-btm-soc.c:3061:heart_beat_func_one_chain: for chain 2
2019-02-28 15:15:40 driver-btm-soc.c:3061:heart_beat_func_one_chain: for chain 1
2019-02-28 15:15:40 driver-btm-soc.c:3061:heart_beat_func_one_chain: for chain 0
2019-02-28 15:15:40 power.c:101:power_on: init gpio907
2019-02-28 15:15:43 dspic33ep16gs202.c:410:hashboard_power_cntl: [0] ok, i2c=0!
2019-02-28 15:15:43 dspic33ep16gs202.c:410:hashboard_power_cntl: [0] ok, i2c=1!
2019-02-28 15:15:44 dspic33ep16gs202.c:410:hashboard_power_cntl: [0] ok, i2c=2!
2019-02-28 15:15:47 driver-btm-soc.c:7790:bitmain_soc_init: Enter 30s sleep to make sure power release finish.
2019-02-28 15:16:17 driver-btm-soc.c:7545:set_working_voltage_by_eeprom: eeprom voltage[0] = 19.300000
2019-02-28 15:16:17 driver-btm-soc.c:7545:set_working_voltage_by_eeprom: eeprom voltage[1] = 19.300000
2019-02-28 15:16:17 driver-btm-soc.c:7545:set_working_voltage_by_eeprom: eeprom voltage[2] = 19.300000
2019-02-28 15:16:17 power.c:136:set_working_voltage: working_voltage = 19.300000
2019-02-28 15:16:17 power.c:259:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2019-02-28 15:16:17 power.c:211:set_iic_power_by_voltage: now setting voltage to : 20.000000
2019-02-28 15:16:17 eeprom.c:839:travel_eeprom_store: chain[0] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:440 IC[001]:470 IC[002]:470 IC[003]:455 IC[004]:470
IC[005]:470 IC[006]:455 IC[007]:470 IC[008]:470 IC[009]:440
IC[010]:455 IC[011]:470 IC[012]:470 IC[013]:440 IC[014]:470
IC[015]:455 IC[016]:440 IC[017]:470 IC[018]:470 IC[019]:470
IC[020]:470 IC[021]:470 IC[022]:470 IC[023]:440 IC[024]:455
IC[025]:455 IC[026]:440 IC[027]:470 IC[028]:470 IC[029]:470
IC[030]:470 IC[031]:470 IC[032]:470 IC[033]:455 IC[034]:440
IC[035]:470 IC[036]:470 IC[037]:470 IC[038]:440 IC[039]:455
IC[040]:470 IC[041]:470 IC[042]:470 IC[043]:455 IC[044]:440
IC[045]:440 IC[046]:470 IC[047]:470 IC[048]:455 IC[049]:470
IC[050]:470 IC[051]:470 IC[052]:470 IC[053]:455 IC[054]:440
IC[055]:440 IC[056]:455 IC[057]:470 IC[058]:470 IC[059]:470
voltage: 18.60 V
hash rate: 07054 GH/s
freq data per ASIC in mode2:
IC[000]:505 IC[001]:505 IC[002]:505 IC[003]:505 IC[004]:505
IC[005]:505 IC[006]:505 IC[007]:505 IC[008]:505 IC[009]:505
IC[010]:505 IC[011]:505 IC[012]:505 IC[013]:505 IC[014]:505
IC[015]:505 IC[016]:505 IC[017]:505 IC[018]:505 IC[019]:505
IC[020]:505 IC[021]:505 IC[022]:505 IC[023]:505 IC[024]:505
IC[025]:505 IC[026]:505 IC[027]:505 IC[028]:505 IC[029]:505
IC[030]:505 IC[031]:505 IC[032]:505 IC[033]:505 IC[034]:505
IC[035]:505 IC[036]:505 IC[037]:505 IC[038]:505 IC[039]:505
IC[040]:505 IC[041]:505 IC[042]:505 IC[043]:505 IC[044]:505
IC[045]:505 IC[046]:505 IC[047]:505 IC[048]:505 IC[049]:505
IC[050]:505 IC[051]:505 IC[052]:505 IC[053]:505 IC[054]:505
IC[055]:505 IC[056]:505 IC[057]:505 IC[058]:505 IC[059]:505
voltage in mode2: 19.30 V
hash rate in mode2: 07734 GH/s
2019-02-28 15:16:17 eeprom.c:839:travel_eeprom_store: chain[1] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:440 IC[001]:455 IC[002]:455 IC[003]:455 IC[004]:455
IC[005]:455 IC[006]:455 IC[007]:440 IC[008]:455 IC[009]:455
IC[010]:455 IC[011]:440 IC[012]:455 IC[013]:455 IC[014]:455
IC[015]:440 IC[016]:455 IC[017]:455 IC[018]:455 IC[019]:455
IC[020]:455 IC[021]:455 IC[022]:440 IC[023]:455 IC[024]:455
IC[025]:440 IC[026]:455 IC[027]:455 IC[028]:455 IC[029]:455
IC[030]:455 IC[031]:455 IC[032]:455 IC[033]:455 IC[034]:440
IC[035]:455 IC[036]:455 IC[037]:455 IC[038]:455 IC[039]:440
IC[040]:455 IC[041]:455 IC[042]:455 IC[043]:440 IC[044]:455
IC[045]:455 IC[046]:455 IC[047]:440 IC[048]:455 IC[049]:455
IC[050]:440 IC[051]:455 IC[052]:455 IC[053]:455 IC[054]:455
IC[055]:440 IC[056]:455 IC[057]:455 IC[058]:455 IC[059]:455
voltage: 18.60 V
hash rate: 06909 GH/s
freq data per ASIC in mode2:
IC[000]:510 IC[001]:510 IC[002]:510 IC[003]:510 IC[004]:510
IC[005]:510 IC[006]:510 IC[007]:510 IC[008]:510 IC[009]:510
IC[010]:510 IC[011]:510 IC[012]:510 IC[013]:510 IC[014]:510
IC[015]:510 IC[016]:510 IC[017]:510 IC[018]:510 IC[019]:510
IC[020]:510 IC[021]:510 IC[022]:510 IC[023]:510 IC[024]:510
IC[025]:510 IC[026]:510 IC[027]:510 IC[028]:510 IC[029]:510
IC[030]:510 IC[031]:510 IC[032]:510 IC[033]:510 IC[034]:510
IC[035]:510 IC[036]:510 IC[037]:510 IC[038]:510 IC[039]:510
IC[040]:510 IC[041]:510 IC[042]:510 IC[043]:510 IC[044]:510
IC[045]:510 IC[046]:510 IC[047]:510 IC[048]:510 IC[049]:510
IC[050]:510 IC[051]:510 IC[052]:510 IC[053]:510 IC[054]:510
IC[055]:510 IC[056]:510 IC[057]:510 IC[058]:510 IC[059]:510
voltage in mode2: 19.30 V
hash rate in mode2: 07797 GH/s
2019-02-28 15:16:17 eeprom.c:839:travel_eeprom_store: chain[2] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:470 IC[001]:470 IC[002]:470 IC[003]:455 IC[004]:455
IC[005]:455 IC[006]:455 IC[007]:470 IC[008]:470 IC[009]:470
IC[010]:470 IC[011]:470 IC[012]:470 IC[013]:455 IC[014]:455
IC[015]:455 IC[016]:455 IC[017]:470 IC[018]:470 IC[019]:470
IC[020]:455 IC[021]:470 IC[022]:455 IC[023]:470 IC[024]:470
IC[025]:470 IC[026]:470 IC[027]:470 IC[028]:455 IC[029]:455
IC[030]:470 IC[031]:470 IC[032]:470 IC[033]:455 IC[034]:455
IC[035]:470 IC[036]:470 IC[037]:455 IC[038]:470 IC[039]:455
IC[040]:470 IC[041]:470 IC[042]:455 IC[043]:470 IC[044]:455
IC[045]:470 IC[046]:470 IC[047]:470 IC[048]:455 IC[049]:455
IC[050]:470 IC[051]:470 IC[052]:470 IC[053]:455 IC[054]:455
IC[055]:455 IC[056]:470 IC[057]:470 IC[058]:470 IC[059]:455
voltage: 18.60 V
hash rate: 07102 GH/s
freq data per ASIC in mode2:
IC[000]:510 IC[001]:510 IC[002]:510 IC[003]:510 IC[004]:510
IC[005]:510 IC[006]:510 IC[007]:510 IC[008]:510 IC[009]:510
IC[010]:510 IC[011]:510 IC[012]:510 IC[013]:510 IC[014]:510
IC[015]:510 IC[016]:510 IC[017]:510 IC[018]:510 IC[019]:510
IC[020]:510 IC[021]:510 IC[022]:510 IC[023]:510 IC[024]:510
IC[025]:510 IC[026]:510 IC[027]:510 IC[028]:510 IC[029]:510
IC[030]:510 IC[031]:510 IC[032]:510 IC[033]:510 IC[034]:510
IC[035]:510 IC[036]:510 IC[037]:510 IC[038]:510 IC[039]:510
IC[040]:510 IC[041]:510 IC[042]:510 IC[043]:510 IC[044]:510
IC[045]:510 IC[046]:510 IC[047]:510 IC[048]:510 IC[049]:510
IC[050]:510 IC[051]:510 IC[052]:510 IC[053]:510 IC[054]:510
IC[055]:510 IC[056]:510 IC[057]:510 IC[058]:510 IC[059]:510
voltage in mode2: 19.30 V
hash rate in mode2: 07799 GH/s
2019-02-28 15:16:18 dspic33ep16gs202.c:410:hashboard_power_cntl: [1] ok, i2c=0!
2019-02-28 15:16:18 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2019-02-28 15:16:21 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2019-02-28 15:16:24 driver-btm-soc.c:5395:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2019-02-28 15:16:24 driver-btm-soc.c:5351:check_asic_num_without_power_off: Open 16 core for chain 0
2019-02-28 15:16:24 driver-btm-soc.c:3953:open_core_BM1391_pre_open: pre open core = 16
2019-02-28 15:16:25 driver-btm-soc.c:3928:pre_open_core_one_chain: for chain 0
2019-02-28 15:16:25 driver-btm-soc.c:3953:open_core_BM1391_pre_open: pre open core = 16
2019-02-28 15:16:25 driver-btm-soc.c:3928:pre_open_core_one_chain: for chain 0
2019-02-28 15:16:25 driver-btm-soc.c:3953:open_core_BM1391_pre_open: pre open core = 16
2019-02-28 15:16:26 driver-btm-soc.c:3928:pre_open_core_one_chain: for chain 0
2019-02-28 15:16:26 driver-btm-soc.c:3953:open_core_BM1391_pre_open: pre open core = 16
2019-02-28 15:16:27 driver-btm-soc.c:3928:pre_open_core_one_chain: for chain 0
2019-02-28 15:16:27 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2019-02-28 15:16:30 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2019-02-28 15:16:33 driver-btm-soc.c:5365:check_asic_num_without_power_off: chain 0, find asic num = 60
2019-02-28 15:16:34 dspic33ep16gs202.c:410:hashboard_power_cntl: [1] ok, i2c=1!
2019-02-28 15:16:34 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2019-02-28 15:16:37 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2019-02-28 15:16:40 driver-btm-soc.c:5395:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2019-02-28 15:16:40 driver-btm-soc.c:5351:check_asic_num_without_power_off: Open 16 core for chain 1
2019-02-28 15:16:40 driver-btm-soc.c:3953:open_core_BM1391_pre_open: pre open core = 16
2019-02-28 15:16:40 driver-btm-soc.c:3928:pre_open_core_one_chain: for chain 1
2019-02-28 15:16:40 driver-btm-soc.c:3953:open_core_BM1391_pre_open: pre open core = 16
2019-02-28 15:16:41 driver-btm-soc.c:3928:pre_open_core_one_chain: for chain 1
2019-02-28 15:16:41 driver-btm-soc.c:3953:open_core_BM1391_pre_open: pre open core = 16
2019-02-28 15:16:42 driver-btm-soc.c:3928:pre_open_core_one_chain: for chain 1
2019-02-28 15:16:42 driver-btm-soc.c:3953:open_core_BM1391_pre_open: pre open core = 16
2019-02-28 15:16:43 driver-btm-soc.c:3928:pre_open_core_one_chain: for chain 1
2019-02-28 15:16:43 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2019-02-28 15:16:46 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2019-02-28 15:16:49 driver-btm-soc.c:5365:check_asic_num_without_power_off: chain 1, find asic num = 60
2019-02-28 15:16:49 dspic33ep16gs202.c:410:hashboard_power_cntl: [1] ok, i2c=2!
2019-02-28 15:16:49 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2019-02-28 15:16:52 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2019-02-28 15:16:55 driver-btm-soc.c:5395:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2019-02-28 15:16:55 driver-btm-soc.c:5351:check_asic_num_without_power_off: Open 16 core for chain 2
2019-02-28 15:16:55 driver-btm-soc.c:3953:open_core_BM1391_pre_open: pre open core = 16
2019-02-28 15:16:56 driver-btm-soc.c:3928:pre_open_core_one_chain: for chain 2
2019-02-28 15:16:56 driver-btm-soc.c:3953:open_core_BM1391_pre_open: pre open core = 16
2019-02-28 15:16:57 driver-btm-soc.c:3928:pre_open_core_one_chain: for chain 2
2019-02-28 15:16:57 driver-btm-soc.c:3953:open_core_BM1391_pre_open: pre open core = 16
2019-02-28 15:16:58 driver-btm-soc.c:3928:pre_open_core_one_chain: for chain 2
2019-02-28 15:16:58 driver-btm-soc.c:3953:open_core_BM1391_pre_open: pre open core = 16
2019-02-28 15:16:58 driver-btm-soc.c:3928:pre_open_core_one_chain: for chain 2
2019-02-28 15:16:58 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2019-02-28 15:17:01 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2019-02-28 15:17:05 driver-btm-soc.c:5365:check_asic_num_without_power_off: chain 2, find asic num = 60
2019-02-28 15:17:05 driver-btm-soc.c:7171:balance_domain_voltage: To balance voltage domain, open all core and reset hash board after find asic num.
2019-02-28 15:17:05 driver-btm-soc.c:7182:balance_domain_voltage: Open core 16 for chain 0
2019-02-28 15:17:05 driver-btm-soc.c:3953:open_core_BM1391_pre_open: pre open core = 16
2019-02-28 15:17:05 driver-btm-soc.c:3928:pre_open_core_one_chain: for chain 0
2019-02-28 15:17:05 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff9
2019-02-28 15:17:08 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2019-02-28 15:17:11 driver-btm-soc.c:7182:balance_domain_voltage: Open core 16 for chain 1
2019-02-28 15:17:11 driver-btm-soc.c:3953:open_core_BM1391_pre_open: pre open core = 16
2019-02-28 15:17:12 driver-btm-soc.c:3928:pre_open_core_one_chain: for chain 1
2019-02-28 15:17:12 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
2019-02-28 15:17:15 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2019-02-28 15:17:18 driver-btm-soc.c:7182:balance_domain_voltage: Open core 16 for chain 2
2019-02-28 15:17:18 driver-btm-soc.c:3953:open_core_BM1391_pre_open: pre open core = 16
2019-02-28 15:17:19 driver-btm-soc.c:3928:pre_open_core_one_chain: for chain 2
2019-02-28 15:17:19 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2019-02-28 15:17:22 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2019-02-28 15:17:25 driver-btm-soc.c:7182:balance_domain_voltage: Open core 32 for chain 0
2019-02-28 15:17:25 driver-btm-soc.c:3953:open_core_BM1391_pre_open: pre open core = 32
2019-02-28 15:17:26 driver-btm-soc.c:3928:pre_open_core_one_chain: for chain 0
2019-02-28 15:17:26 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff9
2019-02-28 15:17:29 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2019-02-28 15:17:32 driver-btm-soc.c:7182:balance_domain_voltage: Open core 32 for chain 1
2019-02-28 15:17:32 driver-btm-soc.c:3953:open_core_BM1391_pre_open: pre open core = 32
2019-02-28 15:17:34 driver-btm-soc.c:3928:pre_open_core_one_chain: for chain 1
2019-02-28 15:17:34 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
2019-02-28 15:17:37 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2019-02-28 15:17:40 driver-btm-soc.c:7182:balance_domain_voltage: Open core 32 for chain 2
2019-02-28 15:17:40 driver-btm-soc.c:3953:open_core_BM1391_pre_open: pre open core = 32
2019-02-28 15:17:41 driver-btm-soc.c:3928:pre_open_core_one_chain: for chain 2
2019-02-28 15:17:41 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2019-02-28 15:17:44 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2019-02-28 15:17:47 driver-btm-soc.c:7182:balance_domain_voltage: Open core 64 for chain 0
2019-02-28 15:17:47 driver-btm-soc.c:3953:open_core_BM1391_pre_open: pre open core = 64
2019-02-28 15:17:50 driver-btm-soc.c:3928:pre_open_core_one_chain: for chain 0
2019-02-28 15:17:50 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff9
2019-02-28 15:17:53 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2019-02-28 15:17:56 driver-btm-soc.c:7182:balance_domain_voltage: Open core 64 for chain 1
2019-02-28 15:17:56 driver-btm-soc.c:3953:open_core_BM1391_pre_open: pre open core = 64
2019-02-28 15:17:59 driver-btm-soc.c:3928:pre_open_core_one_chain: for chain 1
2019-02-28 15:17:59 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
2019-02-28 15:18:02 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2019-02-28 15:18:05 driver-btm-soc.c:7182:balance_domain_voltage: Open core 64 for chain 2
2019-02-28 15:18:05 driver-btm-soc.c:3953:open_core_BM1391_pre_open: pre open core = 64
2019-02-28 15:18:08 driver-btm-soc.c:3928:pre_open_core_one_chain: for chain 2
2019-02-28 15:18:08 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2019-02-28 15:18:11 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8
2019-02-28 15:18:25 driver-btm-soc.c:7403:calculate_timeout: dev->timeout = 857
2019-02-28 15:18:25 driver-btm-soc.c:2961:set_baud: set baud=1
2019-02-28 15:18:25 chip1391.c:336:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
2019-02-28 15:18:25 chip1391.c:336:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
2019-02-28 15:18:25 chip1391.c:336:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101
2019-02-28 15:18:25 driver-btm-soc.c:2972:set_baud: read bc write is 0x82001a
2019-02-28 15:18:25 driver-btm-soc.c:4037:set_clock_delay_control: core_data = 0x04
2019-02-28 15:18:25 driver-btm-soc.c:7831:bitmain_soc_init: Open 1/4 core for reading temperature.
2019-02-28 15:18:25 driver-btm-soc.c:3953:open_core_BM1391_pre_open: pre open core = 16
2019-02-28 15:18:26 driver-btm-soc.c:3928:pre_open_core_one_chain: for chain 0
2019-02-28 15:18:26 driver-btm-soc.c:3928:pre_open_core_one_chain: for chain 1
2019-02-28 15:18:27 driver-btm-soc.c:3928:pre_open_core_one_chain: for chain 2
2019-02-28 15:18:27 temperature.c:240:is_tempsensor_data_correct: Bad,temp_info.type = 0
2019-02-28 15:18:27 temperature.c:356:calibration_sensor_offset: chain[0] temp info,Bad. Reload from eeprom..
sensor type = 0,sensor num = 4
sensor pos: 15 11 45 41 0 0 0 0
sensor offset: 0 0 0 0 0 0 0 0
2019-02-28 15:18:27 temperature.c:382:calibration_sensor_offset: chain[0] temp chip I2C addr=0x98
2019-02-28 15:18:27 temperature.c:240:is_tempsensor_data_correct: Bad,temp_info.type = 0
2019-02-28 15:18:27 temperature.c:465:calibration_sensor_offset: Warning: Chain[0] has no temp info ! we will fix it
2019-02-28 15:18:27 chip1391.c:723:set_misc_control: cmd_buf[0]=0x41093818, cmd_buf[1]=0x6131, cmd_buf[2]=0x2000000, misc=0x6131
2019-02-28 15:18:28 temperature.c:487:calibration_sensor_offset: Chain[0] use default temp chip[14]
2019-02-28 15:18:28 temperature.c:496:calibration_sensor_offset: Chain[0] Chip[14] get middle temp offset=-5 typeID=55
2019-02-28 15:18:28 chip1391.c:723:set_misc_control: cmd_buf[0]=0x41092818, cmd_buf[1]=0x6131, cmd_buf[2]=0x1000000, misc=0x6131
2019-02-28 15:18:29 temperature.c:487:calibration_sensor_offset: Chain[0] use default temp chip[10]
2019-02-28 15:18:29 temperature.c:496:calibration_sensor_offset: Chain[0] Chip[10] get middle temp offset=-5 typeID=55
2019-02-28 15:18:29 chip1391.c:723:set_misc_control: cmd_buf[0]=0x4109b018, cmd_buf[1]=0x6131, cmd_buf[2]=0x9000000, misc=0x6131
2019-02-28 15:18:30 temperature.c:487:calibration_sensor_offset: Chain[0] use default temp chip[44]
2019-02-28 15:18:30 temperature.c:496:calibration_sensor_offset: Chain[0] Chip[44] get middle temp offset=-5 typeID=55
2019-02-28 15:18:30 chip1391.c:723:set_misc_control: cmd_buf[0]=0x4109a018, cmd_buf[1]=0x6131, cmd_buf[2]=0xa000000, misc=0x6131
2019-02-28 15:18:30 temperature.c:487:calibration_sensor_offset: Chain[0] use default temp chip[40]
2019-02-28 15:18:31 temperature.c:496:calibration_sensor_offset: Chain[0] Chip[40] get middle temp offset=-5 typeID=55
2019-02-28 15:18:31 temperature.c:240:is_tempsensor_data_correct: Bad,temp_info.type = 0
2019-02-28 15:18:31 temperature.c:356:calibration_sensor_offset: chain[1] temp info,Bad. Reload from eeprom..
sensor type = 0,sensor num = 4
sensor pos: 15 11 45 41 0 0 0 0
sensor offset: 0 0 0 0 0 0 0 0
2019-02-28 15:18:31 temperature.c:382:calibration_sensor_offset: chain[1] temp chip I2C addr=0x98
2019-02-28 15:18:31 temperature.c:240:is_tempsensor_data_correct: Bad,temp_info.type = 0
2019-02-28 15:18:31 temperature.c:465:calibration_sensor_offset: Warning: Chain[1] has no temp info ! we will fix it
2019-02-28 15:18:31 chip1391.c:723:set_misc_control: cmd_buf[0]=0x41093818, cmd_buf[1]=0x6131, cmd_buf[2]=0x2000000, misc=0x6131
2019-02-28 15:18:31 temperature.c:487:calibration_sensor_offset: Chain[1] use default temp chip[14]
2019-02-28 15:18:32 temperature.c:496:calibration_sensor_offset: Chain[1] Chip[14] get middle temp offset=-5 typeID=55
2019-02-28 15:18:32 chip1391.c:723:set_misc_control: cmd_buf[0]=0x41092818, cmd_buf[1]=0x6131, cmd_buf[2]=0x1000000, misc=0x6131
2019-02-28 15:18:32 temperature.c:487:calibration_sensor_offset: Chain[1] use default temp chip[10]
2019-02-28 15:18:33 temperature.c:496:calibration_sensor_offset: Chain[1] Chip[10] get middle temp offset=-5 typeID=55
2019-02-28 15:18:33 chip1391.c:723:set_misc_control: cmd_buf[0]=0x4109b018, cmd_buf[1]=0x6131, cmd_buf[2]=0x9000000, misc=0x6131
2019-02-28 15:18:33 temperature.c:487:calibration_sensor_offset: Chain[1] use default temp chip[44]
2019-02-28 15:18:34 temperature.c:496:calibration_sensor_offset: Chain[1] Chip[44] get middle temp offset=-5 typeID=55
2019-02-28 15:18:34 chip1391.c:723:set_misc_control: cmd_buf[0]=0x4109a018, cmd_buf[1]=0x6131, cmd_buf[2]=0xa000000, misc=0x6131
2019-02-28 15:18:34 temperature.c:487:calibration_sensor_offset: Chain[1] use default temp chip[40]
2019-02-28 15:18:35 temperature.c:496:calibration_sensor_offset: Chain[1] Chip[40] get middle temp offset=-5 typeID=55
2019-02-28 15:18:35 temperature.c:240:is_tempsensor_data_correct: Bad,temp_info.type = 0
2019-02-28 15:18:35 temperature.c:356:calibration_sensor_offset: chain[2] temp info,Bad. Reload from eeprom..
sensor type = 0,sensor num = 4
sensor pos: 15 11 45 41 0 0 0 0
sensor offset: 0 0 0 0 0 0 0 0
2019-02-28 15:18:35 temperature.c:382:calibration_sensor_offset: chain[2] temp chip I2C addr=0x98
2019-02-28 15:18:35 temperature.c:240:is_tempsensor_data_correct: Bad,temp_info.type = 0
2019-02-28 15:18:35 temperature.c:465:calibration_sensor_offset: Warning: Chain[2] has no temp info ! we will fix it
2019-02-28 15:18:35 chip1391.c:723:set_misc_control: cmd_buf[0]=0x41093818, cmd_buf[1]=0x6131, cmd_buf[2]=0x2000000, misc=0x6131
2019-02-28 15:18:35 temperature.c:487:calibration_sensor_offset: Chain[2] use default temp chip[14]
2019-02-28 15:18:36 temperature.c:496:calibration_sensor_offset: Chain[2] Chip[14] get middle temp offset=-5 typeID=55
2019-02-28 15:18:36 chip1391.c:723:set_misc_control: cmd_buf[0]=0x41092818, cmd_buf[1]=0x6131, cmd_buf[2]=0x1000000, misc=0x6131
2019-02-28 15:18:36 temperature.c:487:calibration_sensor_offset: Chain[2] use default temp chip[10]
2019-02-28 15:18:37 temperature.c:496:calibration_sensor_offset: Chain[2] Chip[10] get middle temp offset=-5 typeID=55
2019-02-28 15:18:37 chip1391.c:723:set_misc_control: cmd_buf[0]=0x4109b018, cmd_buf[1]=0x6131, cmd_buf[2]=0x9000000, misc=0x6131
2019-02-28 15:18:37 temperature.c:487:calibration_sensor_offset: Chain[2] use default temp chip[44]
2019-02-28 15:18:38 temperature.c:496:calibration_sensor_offset: Chain[2] Chip[44] get middle temp offset=-5 typeID=55
2019-02-28 15:18:38 chip1391.c:723:set_misc_control: cmd_buf[0]=0x4109a018, cmd_buf[1]=0x6131, cmd_buf[2]=0xa000000, misc=0x6131
2019-02-28 15:18:38 temperature.c:487:calibration_sensor_offset: Chain[2] use default temp chip[40]
2019-02-28 15:18:39 temperature.c:496:calibration_sensor_offset: Chain[2] Chip[40] get middle temp offset=-5 typeID=55
2019-02-28 15:18:42 temperature.c:521:do_calibration_temperature_sensor: bring up lowest temperature is 26
2019-02-28 15:18:42 driver-btm-soc.c:7838:bitmain_soc_init: set TICKET_MASK
2019-02-28 15:18:42 driver-btm-soc.c:4091:open_core_bm1391: Start Open Core!!
2019-02-28 15:18:49 driver-btm-soc.c:4163:open_core_bm1391: End Open Core!!
2019-02-28 15:18:49 freq_tuning.c:291:freq_tuning_get_max_freq: Max freq of tuning is 550
2019-02-28 15:18:50 driver-btm-soc.c:1384:get_eeprom_total_hash_rate: total rate = 23330
2019-02-28 15:18:50 power.c:381:slowly_set_iic_power_to_working_voltage: slowly setting to voltage: 19.30 ...
2019-02-28 15:18:50 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[24] = 19.887610
2019-02-28 15:18:50 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 20.000000
2019-02-28 15:18:51 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[31] = 19.770810
2019-02-28 15:18:51 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 19.887610
2019-02-28 15:18:52 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[38] = 19.654010
2019-02-28 15:18:52 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 19.770810
2019-02-28 15:18:53 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[45] = 19.537210
2019-02-28 15:18:53 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 19.654010
2019-02-28 15:18:54 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[52] = 19.420410
2019-02-28 15:18:54 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 19.537210
2019-02-28 15:18:55 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[54] = 19.387039
2019-02-28 15:18:55 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 19.420410
2019-02-28 15:18:56 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[56] = 19.353667
2019-02-28 15:18:56 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 19.387039
2019-02-28 15:18:57 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[58] = 19.320296
2019-02-28 15:18:57 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 19.353667
2019-02-28 15:18:58 power.c:198:get_power_voltage_from_iic_value: iic_index for voltage[59] = 19.303610
2019-02-28 15:18:58 power.c:229:set_iic_power_by_iic_data: now setting voltage to : 19.320296
2019-02-28 15:18:59 driver-btm-soc.c:6589:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 0. to 505
2019-02-28 15:18:59 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 125.00M
2019-02-28 15:19:00 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 150.00M
2019-02-28 15:19:01 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 175.00M
2019-02-28 15:19:02 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 200.00M
2019-02-28 15:19:03 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 225.00M
2019-02-28 15:19:04 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 250.00M
2019-02-28 15:19:05 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 275.00M
2019-02-28 15:19:06 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 300.00M
2019-02-28 15:19:07 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 325.00M
2019-02-28 15:19:08 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 350.00M
2019-02-28 15:19:09 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 375.00M
2019-02-28 15:19:11 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 400.00M
2019-02-28 15:19:12 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 425.00M
2019-02-28 15:19:13 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 450.00M
2019-02-28 15:19:14 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 475.00M
2019-02-28 15:19:15 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 500.00M
2019-02-28 15:19:16 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 505.00M
2019-02-28 15:19:17 driver-btm-soc.c:6589:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 1. to 510
2019-02-28 15:19:17 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 125.00M
2019-02-28 15:19:18 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 150.00M
2019-02-28 15:19:19 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 175.00M
2019-02-28 15:19:20 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 200.00M
2019-02-28 15:19:21 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 225.00M
2019-02-28 15:19:22 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 250.00M
2019-02-28 15:19:23 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 275.00M
2019-02-28 15:19:24 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 300.00M
2019-02-28 15:19:25 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 325.00M
2019-02-28 15:19:26 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 350.00M
2019-02-28 15:19:27 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 375.00M
2019-02-28 15:19:28 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 400.00M
2019-02-28 15:19:29 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 425.00M
2019-02-28 15:19:30 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 450.00M
2019-02-28 15:19:31 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 475.00M
2019-02-28 15:19:32 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 500.00M
2019-02-28 15:19:33 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 510.00M
2019-02-28 15:19:34 driver-btm-soc.c:6589:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 2. to 510
2019-02-28 15:19:34 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 125.00M
2019-02-28 15:19:36 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 150.00M
2019-02-28 15:19:37 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 175.00M
2019-02-28 15:19:38 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 200.00M
2019-02-28 15:19:39 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 225.00M
2019-02-28 15:19:40 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 250.00M
2019-02-28 15:19:41 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 275.00M
2019-02-28 15:19:42 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 300.00M
2019-02-28 15:19:43 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 325.00M
2019-02-28 15:19:44 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 350.00M
2019-02-28 15:19:45 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 375.00M
2019-02-28 15:19:46 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 400.00M
2019-02-28 15:19:47 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 425.00M
2019-02-28 15:19:48 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 450.00M
2019-02-28 15:19:49 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 475.00M
2019-02-28 15:19:50 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 500.00M
2019-02-28 15:19:51 driver-btm-soc.c:4924:increase_freq_slowly:
Increase frequency to 510.00M
2019-02-28 15:19:52 driver-btm-soc.c:5989:set_timeout: freq 510 final timeout=462
2019-02-28 15:19:53 freq_tuning.c:1812:freq_tuning_pre_test_for_user_mode: Pre-test: start.
2019-02-28 15:19:53 freq_tuning.c:1816:freq_tuning_pre_test_for_user_mode: Pre-test: times 0
2019-02-28 15:19:53 freq_tuning.c:966:freq_tuning_send_work: Frequency tuning: send work start.
2019-02-28 15:19:53 freq_tuning.c:881:freq_tuning_send_work_one_chain: Frequency tuning: send work for chain 2
2019-02-28 15:19:53 freq_tuning.c:881:freq_tuning_send_work_one_chain: Frequency tuning: send work for chain 1
2019-02-28 15:19:53 freq_tuning.c:881:freq_tuning_send_work_one_chain: Frequency tuning: send work for chain 0
2019-02-28 15:20:50 freq_tuning.c:954:freq_tuning_send_work_one_chain: Frequency tuning: send work for chain 2 done, time cost 56s, sleep_count = 52340
2019-02-28 15:20:50 freq_tuning.c:954:freq_tuning_send_work_one_chain: Frequency tuning: send work for chain 1 done, time cost 56s, sleep_count = 52342
2019-02-28 15:20:50 freq_tuning.c:954:freq_tuning_send_work_one_chain: Frequency tuning: send work for chain 0 done, time cost 56s, sleep_count = 52338
2019-02-28 15:20:50 freq_tuning.c:1016:freq_tuning_send_work: Frequency tuning: send work done, time cost 57s
2019-02-28 15:20:51 freq_tuning.c:432:freq_tuning_parameter_dump: ======== dump freq tuning result ========
chain 0
send_work_num : 122880
valid_nonce_num : 122787
nonce_return_rate : 0.999243
repeated_nonce_num : 2596
extra_nonce_num : 1594
invalid_nonce_num : 0
crc_err_nonce_num : 0
err_nonce_num : 0
chain_hw_num : 0
chain 1
send_work_num : 122880
valid_nonce_num : 122707
nonce_return_rate : 0.998592
repeated_nonce_num : 2640
extra_nonce_num : 1606
invalid_nonce_num : 0
crc_err_nonce_num : 0
err_nonce_num : 0
chain_hw_num : 0
chain 2
send_work_num : 122880
valid_nonce_num : 122799
nonce_return_rate : 0.999341
repeated_nonce_num : 2598
extra_nonce_num : 1608
invalid_nonce_num : 0
crc_err_nonce_num : 0
err_nonce_num : 0
chain_hw_num : 0
asic_invalid_num : 0
chain_invalid_num : 0
nonce_recv_num_all : 380935
nonce_recv_num_diff : 0
chain 0 asic_nonce_num:
IC[00]:2044 IC[01]:2047 IC[02]:2048 IC[03]:2046 IC[04]:2048
IC[05]:2048 IC[06]:2047 IC[07]:2048 IC[08]:2048 IC[09]:2046
IC[10]:2044 IC[11]:2039 IC[12]:2047 IC[13]:2047 IC[14]:2045
IC[15]:2048 IC[16]:2048 IC[17]:2048 IC[18]:2047 IC[19]:2047
IC[20]:2046 IC[21]:2046 IC[22]:2048 IC[23]:2047 IC[24]:2045
IC[25]:2048 IC[26]:2048 IC[27]:2045 IC[28]:2048 IC[29]:2047
IC[30]:2047 IC[31]:2047 IC[32]:2043 IC[33]:2048 IC[34]:2048
IC[35]:2048 IC[36]:2048 IC[37]:2046 IC[38]:2048 IC[39]:2041
IC[40]:2045 IC[41]:2033 IC[42]:2045 IC[43]:2048 IC[44]:2048
IC[45]:2048 IC[46]:2048 IC[47]:2047 IC[48]:2048 IC[49]:2048
IC[50]:2048 IC[51]:2044 IC[52]:2046 IC[53]:2044 IC[54]:2048
IC[55]:2048 IC[56]:2048 IC[57]:2048 IC[58]:2048 IC[59]:2045
chain 1 asic_nonce_num:
IC[00]:2040 IC[01]:2045 IC[02]:2047 IC[03]:2046 IC[04]:2047
IC[05]:2047 IC[06]:2045 IC[07]:2035 IC[08]:2043 IC[09]:2039
IC[10]:2047 IC[11]:2048 IC[12]:2045 IC[13]:2047 IC[14]:2048
IC[15]:2048 IC[16]:2046 IC[17]:2048 IC[18]:2045 IC[19]:2044
IC[20]:2048 IC[21]:2044 IC[22]:2041 IC[23]:2047 IC[24]:2048
IC[25]:2046 IC[26]:2038 IC[27]:2048 IC[28]:2048 IC[29]:2048
IC[30]:2044 IC[31]:2046 IC[32]:2047 IC[33]:2048 IC[34]:2043
IC[35]:2045 IC[36]:2048 IC[37]:2046 IC[38]:2048 IC[39]:2044
IC[40]:2038 IC[41]:2047 IC[42]:2047 IC[43]:2043 IC[44]:2048
IC[45]:2046 IC[46]:2046 IC[47]:2038 IC[48]:2043 IC[49]:2046
IC[50]:2037 IC[51]:2044 IC[52]:2048 IC[53]:2044 IC[54]:2046
IC[55]:2045 IC[56]:2046 IC[57]:2045 IC[58]:2047 IC[59]:2048
chain 2 asic_nonce_num:
IC[00]:2046 IC[01]:2048 IC[02]:2048 IC[03]:2048 IC[04]:2048
IC[05]:2045 IC[06]:2048 IC[07]:2048 IC[08]:2047 IC[09]:2047
IC[10]:2044 IC[11]:2043 IC[12]:2048 IC[13]:2048 IC[14]:2046
IC[15]:2048 IC[16]:2048 IC[17]:2046 IC[18]:2047 IC[19]:2048
IC[20]:2048 IC[21]:2048 IC[22]:2044 IC[23]:2046 IC[24]:2048
IC[25]:2048 IC[26]:2048 IC[27]:2048 IC[28]:2046 IC[29]:2048
IC[30]:2046 IC[31]:2047 IC[32]:2048 IC[33]:2043 IC[34]:2048
IC[35]:2047 IC[36]:2048 IC[37]:2047 IC[38]:2048 IC[39]:2047
IC[40]:2033 IC[41]:2048 IC[42]:2048 IC[43]:2048 IC[44]:2045
IC[45]:2047 IC[46]:2047 IC[47]:2048 IC[48]:2047 IC[49]:2043
IC[50]:2048 IC[51]:2048 IC[52]:2048 IC[53]:2047 IC[54]:2045
IC[55]:2046 IC[56]:2047 IC[57]:2048 IC[58]:2046 IC[59]:2042
chain 0 domain_nonce_num:
D[00]:2560 D[01]:2559 D[02]:2557 D[03]:2557 D_BIG[00]:10233
D[04]:2558 D[05]:2559 D[06]:2560 D[07]:2560 D_BIG[01]:10237
D[08]:2559 D[09]:2554 D[10]:2555 D[11]:2554 D_BIG[02]:10222
D[12]:2560 D[13]:2560 D[14]:2560 D[15]:2558 D_BIG[03]:10238
D[16]:2559 D[17]:2558 D[18]:2559 D[19]:2556 D_BIG[04]:10232
D[20]:2559 D[21]:2560 D[22]:2557 D[23]:2560 D_BIG[05]:10236
D[24]:2560 D[25]:2557 D[26]:2556 D[27]:2560 D_BIG[06]:10233
D[28]:2559 D[29]:2554 D[30]:2558 D[31]:2560 D_BIG[07]:10231
D[32]:2556 D[33]:2551 D[34]:2559 D[35]:2553 D_BIG[08]:10219
D[36]:2560 D[37]:2560 D[38]:2560 D[39]:2559 D_BIG[09]:10239
D[40]:2559 D[41]:2555 D[42]:2556 D[43]:2560 D_BIG[10]:10230
D[44]:2559 D[45]:2560 D[46]:2560 D[47]:2558 D_BIG[11]:10237
chain 1 domain_nonce_num:
D[00]:2558 D[01]:2558 D[02]:2550 D[03]:2559 D_BIG[00]:10225
D[04]:2550 D[05]:2558 D[06]:2552 D[07]:2549 D_BIG[01]:10209
D[08]:2556 D[09]:2560 D[10]:2559 D[11]:2560 D_BIG[02]:10235
D[12]:2555 D[13]:2559 D[14]:2559 D[15]:2558 D_BIG[03]:10231
D[16]:2558 D[17]:2560 D[18]:2554 D[19]:2556 D_BIG[04]:10228
D[20]:2555 D[21]:2560 D[22]:2554 D[23]:2559 D_BIG[05]:10228
D[24]:2559 D[25]:2554 D[26]:2559 D[27]:2556 D_BIG[06]:10228
D[28]:2557 D[29]:2557 D[30]:2560 D[31]:2557 D_BIG[07]:10231
D[32]:2556 D[33]:2558 D[34]:2558 D[35]:2551 D_BIG[08]:10223
D[36]:2554 D[37]:2554 D[38]:2559 D[39]:2552 D_BIG[09]:10219
D[40]:2555 D[41]:2553 D[42]:2553 D[43]:2558 D_BIG[10]:10219
D[44]:2559 D[45]:2557 D[46]:2558 D[47]:2557 D_BIG[11]:10231
chain 2 domain_nonce_num:
D[00]:2560 D[01]:2558 D[02]:2560 D[03]:2560 D_BIG[00]:10238
D[04]:2559 D[05]:2560 D[06]:2560 D[07]:2556 D_BIG[01]:10235
D[08]:2560 D[09]:2556 D[10]:2554 D[11]:2559 D_BIG[02]:10229
D[12]:2560 D[13]:2560 D[14]:2560 D[15]:2557 D_BIG[03]:10237
D[16]:2560 D[17]:2560 D[18]:2558 D[19]:2556 D_BIG[04]:10234
D[20]:2558 D[21]:2560 D[22]:2560 D[23]:2560 D_BIG[05]:10238
D[24]:2560 D[25]:2554 D[26]:2558 D[27]:2560 D_BIG[06]:10232
D[28]:2559 D[29]:2559 D[30]:2559 D[31]:2560 D_BIG[07]:10237
D[32]:2554 D[33]:2557 D[34]:2553 D[35]:2558 D_BIG[08]:10222
D[36]:2556 D[37]:2558 D[38]:2560 D[39]:2558 D_BIG[09]:10232
D[40]:2557 D[41]:2560 D[42]:2559 D[43]:2560 D_BIG[10]:10236
D[44]:2557 D[45]:2560 D[46]:2559 D[47]:2553 D_BIG[11]:10229
2019-02-28 15:20:51 freq_tuning.c:1111:freq_tuning_wait_recv_nonce: ++++ CRC ERROR = 51680
2019-02-28 15:20:51 freq_tuning.c:1051:freq_tuning_check_domain_unbalance: Check domain unbalance.
2019-02-28 15:20:51 freq_tuning.c:1769:freq_tuning_single_pre_test_for_user_mode: Pre-test: already balance.
2019-02-28 15:20:51 freq_tuning.c:1834:freq_tuning_pre_test_for_user_mode: Pre-test: done.
2019-02-28 15:20:51 freq_tuning.c:2974:do_pre_test_for_user_mode: Pre-test cost 59s.
2019-02-28 15:20:53 power.c:439:get_chain_voltage: chain[0], voltage is: 19.29
2019-02-28 15:20:53 power.c:439:get_chain_voltage: chain[1], voltage is: 19.36
2019-02-28 15:20:54 power.c:439:get_chain_voltage: chain[2], voltage is: 19.24
2019-02-28 15:20:54 power.c:462:get_average_voltage: average voltage is: 19.30
2019-02-28 15:20:54 driver-btm-soc.c:7909:bitmain_soc_init: Init done!
2019-02-28 15:20:54 util.c:2178:process_version_mask: Pool 0 Verion num is 2
2019-02-28 15:20:54 util.c:2178:process_version_mask: Pool 0 Verion num is 2
2019-02-28 15:20:54 temperature.c:1026:read_temp_func: bring_up_pcb_temp = 32
2019-02-28 15:20:55 driver-btm-soc.c:8291:send_job: Version num 2
2019-02-28 15:21:22 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!
2019-02-28 15:21:23 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!
2019-02-28 15:21:25 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254!
2019-02-28 15:21:26 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!
2019-02-28 15:21:28 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!
2019-02-28 15:21:30 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254!
2019-02-28 15:21:32 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!
2019-02-28 15:21:34 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!
2019-02-28 15:21:35 dspic33ep16gs202.c:65:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254!
|
|
|
|
|
Has anyone on this forum actually pre-ordered the T3 for any stated delivery window?
|
|
|
|
This time there are not many more details, but here it goes in case something was missed:
It is important to highlight that disabling the fans (setting to 0) means people with liquid cooling no longer need fans or hardware emulators.
Also the Dragonmint T1 with G29 control board (256m of ram) should work...
Be very careful with those speeds and voltages, just because you can doesn't mean you should. There is no hand holding here and you can easily burn your asics when overclocking or disabling the fans. You can also damage your PSU by overloading it when overclocking.
With great power comes great responsibility, this is the freedom of free open source software.
Any idea how to actually use this command? --no-sensor-scan |
|
|
|
|
Can't wait to see these cheaper units show up on the secondary market!
|
|
|
|
For bigger mining operators they would surely get some attention if huge cash will be credited into their bank accounts after exchanging their mined crypto into fiat cash.
Even on a country which doesn't regulate crypto would really have questions on where those cash came from.If you declare such mining activity then expect for it to be taxed without exemption
since they do know you are generating some serious profits here but for home miners then it is just okay for you not to declare since these are only small time profits.
If you're in the US it would not be very smart to not report your mining income. Lets say BTC goes on another bull run and you decide to cash out a tidy sum of USD, your exchange will likely report that transaction eventually. How will you explain to the IRS why you didn't report that sale of BTC? If you do report the sale, how will you explain the source of the BTC? I find it far simpler and much less stressful to simply report my gains and income, pay my fair share of taxes, and be in a safe, legal position to profit as BTC increases in value in the coming years. If you consider your mining a "business" you get to take advantage of all sorts of deductions and credits to reduce your taxable income, whether that be your mining income or your normal/salary income. I got to deduct the cost of the miners I purchased last year and the short/long term losses incurred by buying those miners with BTC! Filing actually increased my tax refund! |
|
|
|
|
Revised prices and offerings!
|
|
|
|
|
As a note for those filing taxes in the US on mining income.
For one, you should treat this income as business income. By doing so, you can deduct the cost of your equipment using:
Section 1.263(a)-1(f)
Safe Harbor De Minimis Election
This allows you to deduct the cost of your mining equipment as a one-off deduction, taking the full value of the deduction instead of worrying about depreciation tables and such. This was actually suggested to me by TurboTax since none of the miners I bought this past year cost more than $2400 each.
Has anyone else used this election?
I’ve already filed and had my return approved/dispensed.
|
|
|
|
SO the S11, S15, T15, S17 and T17 are all 7nm? Why bother with so many models?
Ok NVM, i see the chip model number have increased as well. I wonder what will the pricing be, and when will MicroBT respond...
I believe the S11 is running BM's most advanced 16nm chip. Wasn't mentioned in the initial announcement of their first 7nm miners and the efficiency numbers don't line up to be running their 7nm chip. |
|
|
|
|
I'm definitely holding off. I was on the verge of swapping out all of my T1's / 821's for T15's / S15's but when(if?) the release of these 2nd-gen comes about the prices for these will drop considerably. Don't want to pay 1k for something I could pay 400 for in a few months.
|
|
|
|
|
Did Innosilicon ever actually release their eth miners? I don’t remember them ever going up for sale and I haven’t seen them for sale here ever before.
|
|
|
|
|
Looks like we just dropped to 103% PPS
|
|
|
|
I lost access to my machines via ip. When I try to get with root/root login and pass, I cant get into the web UI. Also, the green light as they're mining is turned on. I don't see any hash rate on any of my workers on the pool? I had to get into it pressing the reset button and setting up every machine again....
Just to see your opinion, what could happen there? somebody hacked my machines?
Thank you!
That does seem to be the likely scenario, were they producing the normal heat you would expect? Assuming you are running L3+'s, BM released a FW a couple of months ago to address "vulnerabilities" across all kinds of L3's. Are you running this updated FW? If not, its possible whatever vulnerability that got patched was exploited to change the credentials of your machines. |
|
|
|
|
BM site is saying coupons up to $230 can be used for both the S15 and T15, has this always been the case?
|
|
|
|
|
Show Posts
