Show Posts
|
Pages: « 1 [2] 3 »
|
Anyone else having an issue with the Auto Switch not working? I have Auto Switch enabled, but I am not changing coins nor am I mining the coin that's listed as the current most profitable coin. I tried to manually change the coin and that did not work either. Closing my miner, waiting a while, then restarting my miner I switched to the coin I manually selected, but the Auto Switch is still not working.
|
|
|
Nice. Glad someone with the means is willing to play around with stuff like this. I was doing more research after the initial reply, and the x370 chipset has 8 pcie lanes where the B350 only had 6. X399 was too expensive to look at for me, but the x370 chipset may have some potential for mining.
I went ahead and bought an Asus Prime Z270-P and celeron processor since it's the most common and I'll be able to find the most support for it. This will be the first Intel computer I've ever built, I've been AMD only for the last 20 years.
|
|
|
Dang, that's what I was afraid of, hardware limitations. I was searching for AMD CPU and couldn't find any threads, didn't think to search for the chipset. Thanks for the reply.
|
|
|
I notice most, if not all, people use the intel 1151 socket motherboard/CPU for building mining rigs. Is there a reason people don't use the AMD boards? Right now it's hard to find the intel boards, and they are more expensive. Finding an AM4 socket board with 6 pcie slots and 2 M2 slots is cheap and easy. Something like this: https://www.newegg.com/Product/Product.aspx?Item=N82E16813157761after mail in rebates, it's only $55. 6 pcie slots and 2 M.2 slots for a possible 8 GPUs. Low end AM4 processors are out now too, with the Athlon x4 and APUs. Just curious if they just plain don't work, or if people were just using the intel boards because they were cheap and easy to get ahold of at the time.
|
|
|
Try a different version of cgminer or try bfgminer. It looks like everything is recognizing the blade, but it's not accepting shares. Do you have 1 power cord and 1 USB cord plugged into each card? (So 2 power cords for each unit).
I use cgminer just because that's what I was using back in 2014. You are using a different version than I am, so may be a possibility.
|
|
|
I don't use the com ports in my batch file. I run some Gridseed dual miners and a Gridseed blade. I use this:
cgminer.exe --scrypt -o stratum+tcp://hash-to-coins.com:3333 -u USER.1 -p x --gridseed-options=baud=115200,freq=888,chips=5 --hotplug 30 --gridseed-override "48E981603731:freq=850,chips=40;48EF6F4B3734:freq=850,chips=40"
that way my dual miners run at 888mhz and my blade runs at 850 and the hash rate is reported correctly (5 chips vs 40 chips).
I have to unplug my USB hub, start the cgminer, then plug the USB hub in after the program is running. Will not work correctly if they are connected to the computer when I first start cgminer.
As long as you've used Zadig (or something comprable) to change all the Virtual COM Port drivers to WinUSB, should be good to go.
|
|
|
make sure you send them all the information they need after you submit the 2FA removal request - 2 forms of government ID (just like an I-9 form when you apply for employment) - Selfie with you, your ID, and a paper with Bittrex and the date written on it - last IP addresses - last transactions - last balances
For the last two, I took a screenshot of my Wallet screen with Hide Zero Balances checked, which shows balances and last transfers. On your Summary screen it will show all the IP addresses you have used to log on.
It may help that I was enhanced verified before trying to get my account enabled.
|
|
|
When will an overview of all machines be available?
Its so hard to see what my machines are doing, digging into each coin to see if my machines are currently active/mining that coin.
I second this, would be a great feature to add. I like the way Hash-To-Coins does theirs, right at the top of the homepage.
|
|
|
AMD, just goto AMD's website and download the newest driver pack available on the website to get the Adrenaline drivers. Open up Radeon Settings, click Gaming in the top left corner, click Global Settings, then change GPU Workload from Graphics to Compute, you can reference the link I posted a couple of posts back which is a screenshot. Not sure why the MSI Afterburner works for me and not other people.
|
|
|
My only experience is changing from Catalyst drivers to the Blockchain drivers, then going to the Adrenaline drivers. Adrenaline drivers have 2 different workload modes, Graphics and Compute. Running on the Adrenaline Graphics mode gives me a similar hashrate to the old Catalyst drivers, and running Adrenaline Compute mode gives me similar hashrate to the Blockchain drivers. I do not maximize my setup for hashing though, so on dedicated rigs, there still might be an incentive to run the blockchain drivers. I turn off my mining program, switch drivers to Graphics, and then play games and when I'm done I switch the drivers back to Compute and turn my miner back on. MSI Afterburner worked for me with the Adrenaline drivers. I run a single RX 480 GPU, mining Eth I get ~25 on the Compute, and ~15 on Graphics. If you're not gaming on your computer, I wouldn't update because I don't believe there's any gain over the blockchain drivers. For me, the Adrenaline drivers are a good fit though.
|
|
|
2FA TRICK WORKS!!!!!
11 days waiting on support ticket to no response, 2 days after submitting 2FA removal request, everything is done!
773224 ticket SOLVED 875305 (2FA removal) SOLVED
When they send you the e-mail saying your 2FA was successfully removed, go back on the support website for the 2FA ticket and send a response to go ahead and ENABLE or VERIFY your account because it takes all the same documentation!
Thanks OP
|
|
|
Can't figure out how to post images in the forum.
|
|
|
Can we get an option to individually include/exclude certain coins in the coin switching? For example, if we did want to mine a coin but you presently have it turned off the autoswitch. Or conversely, if one of the coins on autoswitch is not on an exchange we use and we don't want to mine it. I know I'm asking for a lot, but it would be a neat feature since there is no autoexchange feature.
|
|
|
I personally went ahead and switched, I like the website of Multipool and would switch back if it goes back to working the way it was before.
|
|
|
Why not just switch the newest Adrenaline drivers from Graphics mode to Compute mode? I get the same effect as running the blockchain drivers without having to uninstall and reinstall different/older drivers. Just curious because I see most people use the dedicated blockchain drivers but the newest drivers have the option to use either.
|
|
|
I submitted a second ticket for the 2FA trick yesterday. Will see how long it takes to get a response from support. Been 2 weeks on my first ticket.
It's interesting that they wanted 2 government issued IDs for the 2FA ticket, but only required 1 for the ACCOUNT_DISABLED.
|
|
|
Are you using the MultiPoolMiner? If so, go into your MultiPoolMiner folder, into Miners, and delete any that say Excavator. Should be .txt or .ps1 files. I deleted it out and just used the other miners, I couldn't get it to work for me neither.
|
|
|
Do you guys offer an auto-exchange to consolidate the different coins into 1 currency?
|
|
|
So I'm trying to run the scrypt multipool on MPH again, and still can't figure out how to set the initial difficulty lower. My batch file is as follows:
cgminer.exe --scrypt -o stratum+tcp://hub.miningpoolhub.com:17001 -u user.1 -p d=640 --gridseed-options=baud=115200,freq=888,chips=5 --hotplug 30 --gridseed-override "48E981603731:freq=838,chips=40;48EF6F4B3734:freq=838,chips=40"
The initial difficulty comes up at 8.19k and basically I don't submit any shares from my 5chip Gridseeds. 640 difficulty on other pools seems to work okay as a baseline.
|
|
|
Anyone having any issues with the Scrypt pool not switching coins? The website is updating most profitable coin, but not the actual pool. In the last 3 hours I've only mined Gulden (NLG), but since I've been checking it has never been the most profitable coin according to Multipool. I might manually switch to just mining Verge ...
Are people moving away from this pool? Not a lot of action on this thread. I like this pool because the vari diff works well with my old scrypt ASICs.
|
|
|
|