|
4
|
Alternate cryptocurrencies / Announcements (Altcoins) / Re: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)
|
on: April 14, 2020, 10:35:35 AM
|
Thanks for the Tips. With hugepages enabled and 12 threads Im getting some more H/s. But I still have a huge difference between the two identical servers. Both running the same command. And htop shows 99-100% CPU utilization in both servers.... Very strange....
EDIT:
With 12 cores and hugepages enabled, the difference is even bigger:
Server1:
[2020-04-14 11:07:12.505] speed 10s/60s/15m 1655.8 1657.6 1654.0 H/s max 2204.9 H/s
Server2:
[2020-04-14 11:05:46.498] speed 10s/60s/15m 6188.6 6223.6 6235.3 H/s max 6273.5 H/s
Any idea what I can check? As said, both servers are showing 12 cores at 100% cpu utilization. (htop)
Well, the last idea for me would be: is it possible that one server keeps the CPU at some weird power saving mode? You can quickly check this with "lscpu" having a look at the MHz or you can (if it's really the same hardware all in all) compare the CPU temperature under full load with "sensors" (package lm-sensors). Good luck! |
|
|
|
|
5
|
Alternate cryptocurrencies / Announcements (Altcoins) / Re: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)
|
on: April 13, 2020, 05:09:40 PM
|
I have two servers exactly identical. Same CPU, same ram, same HDD, same ISP. Once is giving me 1300 H/s and the other one is 4300 H/s Server1 [2020-04-13 15:28:33.072] speed 10s/60s/15m 1287.2 1370.7 1374.7 H/s max 1440.7 H/s Server2 [2020-04-13 15:29:02.897] speed 10s/60s/15m 4397.6 4414.0 4384.7 H/s max 4607.8 H/s Both servers are showing this when startig : * ABOUT bbprig/5.10.0 gcc/7.5.0
* BBP + XMR - Welcome to the future of orphan charity
* To donate to the XMRig devs, send XMR here 48edfHu7V9Z84YzzMa6fUueoELZ9ZRXq9VetWzYGzKt52XU5xvqgzYnDK9URnRoJMk 1j8nLwEVsaSWJ4fhdUyZijBGUicoD (or BTC here) 1P7ujsXeX7GxQwHNnJsRMgAdNkFZmNVqJT
* LIBS libuv/1.18.0 OpenSSL/1.1.0g hwloc/1.11.2
* HUGE PAGES supported
* 1GB PAGES disabled
* CPU Intel(R) Xeon(R) CPU X5660 @ 2.80GHz (2) x64 AES
L2:3.0 MB L3:24.0 MB 12C/24T NUMA:2
* MEMORY 1.5/15.7 GB (9%)
* DONATE 10%
* ASSEMBLY auto:intel
* POOL #1 foundation.biblepay.org:3001 algo auto
* COMMANDS hashrate, pause, resume
* OPENCL disabled
* CUDA disabled
[2020-04-13 14:41:56.278] net use pool foundation.biblepay.org Orphan Charity
[2020-04-13 14:41:56.278] net new job from foundation.biblepay.org diff 75000 algo rx/0 height 2075831
[2020-04-13 14:41:56.280] msr msr kernel module is not available
[2020-04-13 14:41:56.280] rx init datasets algo rx/0 (24 threads) seed b2e5f3d303dff783...
[2020-04-13 14:41:56.282] rx #0 allocated 2080 MB huge pages 0% (2 ms)
[2020-04-13 14:41:56.282] rx #1 allocated 2080 MB huge pages 0% (2 ms)
[2020-04-13 14:41:56.283] rx #0 allocated 256 MB huge pages 0% +JIT (1 ms)
[2020-04-13 14:41:56.283] rx -- allocated 4416 MB huge pages 0% 0/2208 (3 ms)
[2020-04-13 14:41:59.565] rx #0 dataset ready (3282 ms)
[2020-04-13 14:42:00.307] rx #1 dataset ready (742 ms)
[2020-04-13 14:42:00.307] cpu use profile * (24 threads) scratchpad 2048 KB
[2020-04-13 14:42:00.781] cpu READY threads 24/24 (24) huge pages 0% 0/24 memory 49152 KB (474 ms) That doesn't seem right. Are you sure you are starting them with the same command/script from the same operating system? I guess you have ubuntu, plz check with "htop" for the CPU load. btw: some tipps for xmrig: - use the number of physical threads your System has, which is 12 (2x6), not 24
- for slightly better performance enable "hugepages" in your system or start the miner as root (xmrig can configure RAM itself)
- for even better performance you could enable "1GB-hugepages" (just google xmrig 1gb-hugepages ubuntu), but this would require a lot more RAM than you currently have (at least 40 GB)
|
|
|
|
|
8
|
Alternate cryptocurrencies / Announcements (Altcoins) / Re: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)
|
on: April 04, 2020, 06:59:25 PM
|
When I updated the wallet, I replaced wallet.dat in the new BiblePay folder with wallet.dat from the old BiblepayEvolution folder. If wallet.dat was missing, would my correct balance show on the Overview tab and with the command 'listaddressbalances'?
Also I am not sure why I am not listed on the Leaderboard. Boinc is running fine and my contribution history is shown on the WCG website. Maybe I should back up wallet.dat, uninstall the wallet and start from scratch?
What happens, when you manually do "sendgscc wcg"? Some days ago I had the same problem and with this I got the following: "Error!": "Sorry, you must set up an external purse to send GSC transmissions. Please type 'exec createpurse help'." Not sure why this happened, since I haven't changed anything for weeks and it always worked just fine. Anyway, unlocking the wallet and then performing "exec createpurse help" solved it and I'm now in the leaderboard again. |
|
|
|
|
9
|
Alternate cryptocurrencies / Announcements (Altcoins) / Re: BiblePay | 10% to Orphan-Charity | POBH CPU | Sanctuaries (Masternodes)
|
on: April 01, 2020, 06:26:40 PM
|
Followed instructions but things are even worse. I've lost over half of my coins since updating 2 machines to 1.5.0.7. I assume I made a mistake during the updates.
That sure sounds like you were on a fork chain by using the older wallet. So the coins you "lost" were probably never legit in the first place, but mined on the fork chain and therefore invalid. Now that you are synced with the chain you shoud be seeing the correct amount of coins. For a more detailled view you can use the command "listaddressbalances 0.1". |
|
|
|
|
11
|
Alternate cryptocurrencies / Announcements (Altcoins) / Re: BiblePay | 10% to Orphan-Charity | POBH CPU | Sanctuaries (Masternodes)
|
on: March 29, 2020, 07:29:14 AM
|
Can you give us a screenshot of the XMR tab not populating? Thats also not happening on any of my machines, and not reported anywhere.
Is it that you just have to paste the address in and click lookup?
Sure, no problem. Here is a screenshot. It happens on all web browsers but was working fine just a couple days ago.  The XMR tab looks exactly the same for me and has never looked anything different. I thought it wasn't implemented yet.  Tested this on different browsers (FF, Chrome, Vivaldi) in "normal" and "private" mode. Other than that I have no problems with the pool whatsoever, so this cannot be the reason for your mining issues.  Thanks for the tip with minexmr.com, I see my stats there just fine. |
|
|
|
|
13
|
Alternate cryptocurrencies / Announcements (Altcoins) / Re: BiblePay | 10% to Orphan-Charity | POBH CPU | Sanctuaries (Masternodes)
|
on: March 26, 2020, 03:47:19 PM
|
Hello all, I discovered yesterday that the mandatory upgrade was taking place and upgraded my wallet and also my masternode. Everything went smoothly.  Just a couple of quick questions: 1. What is gonna happen to PODC now? Is it (going to be) deprecated, or continuing as before? Is there some kind of prognosis about the profitability PODC vs. BBB/XMR RandomX? 2. My wallet now shows the following versionreport: {
"Version": "Popularity,Percent %",
"1487": "188; 91.70%",
"1507": "17; 8.29%"
}What does that mean for the masternode payments, if currently not even 10% of masternodes are on the right chain? 3. I tried the NOMP pool for RandomX and it works just fine for me (except that my Win10 machine has its RAM too crowded to provide huge pages *lol*). The pool pays matured blocks right away, that means it doesn't collect any balances up to a payout level, right? Is the payout method the same for BBP and XMR? (not that I'm expecting much of a payout anyway with my 2 CPUs  ) Thanks in advance and keep up the good work! God bless you all in these troublesome times. |
|
|
|
|
14
|
Alternate cryptocurrencies / Announcements (Altcoins) / Re: BiblePay | 10% to Orphan-Charity | POBH CPU | Sanctuaries (Masternodes)
|
on: February 07, 2020, 04:37:00 PM
|
Just received this message when I did an exec rac:
"Error": "Your CPID is linked to your CPK, but we are unable to find your research records in WCG; most likely because you are not in team BiblePay yet.",
I've been doing just fine over the last several days without being in team Biblepay. Was the team restriction changed again? Thanks!
Ok, looking at this issue (not linked cpids, truncated CPID info): The problem has been resolved. (The technical reason was the WCG info we read was cut off at that particular time - but when rescanned - all data came in). So as a user, if you want immediate results please restart biblepay and let it re-load the cpids - then exec rac should work - or you can simply wait ~4 hrs, and during the next block cycle (within 102 blocks) it will repopulate the leaderboard. (The sancs will automatically repopulate at the next mid-cycle). Did anyone else miss the superblock reward because of this? My wallet sent a GSC transmission at block 174559, but I did not receive the payment at 174680.  |
|
|
|
|
15
|
Alternate cryptocurrencies / Announcements (Altcoins) / Re: BiblePay | 10% to Orphan-Charity | POBH CPU | Sanctuaries (Masternodes)
|
on: January 22, 2020, 03:25:12 PM
|
Solo mining with a Ryzen, 8 threads doing each 24kHs, 192kHs combined, now considered as gpu mining !? Are you serious ?
2020-01-22 01:00:49 ERROR: AcceptBlockHeader: Consensus::CheckBlockHeader: 57786e9e872bfaeff5d2d5a020d68c71eea849fbe9c242b7a2d86612938eef06, high-hash, proof of work failed (code 16)
My server with 16 threads doing each 10kHs, 160kHs combined is running fine and finding blocks.
This release for ( trying to ) block gpu is just a bunch of crap ...
"bunch of crap": -> No, I'm afraid you don't know what you are talking about. Could you provide one piece of evidence of a way to get around it with a gpu? Or, you can surely win the 2 mil bounty if you care to? Please explain. All I'm asking for is for you to explain your position in detail. I've been answering your posts but this seems to be a one way endeavor (you just complain more with a baseless complaint). @Rob: his problem is NOT a hypothetical ability to mine with GPU, but a now existing INability to mine with a high power CPU. @whyme: why don't you redirect your ryzen against WCG and do some PODC instead of simple "heat mining"? |
|
|
|
|
16
|
Alternate cryptocurrencies / Announcements (Altcoins) / Re: BiblePay | 10% to Orphan-Charity | POBH CPU | Sanctuaries (Masternodes)
|
on: December 30, 2019, 09:45:26 PM
|
It seems SouthXchange added a 9th decimal to all its BTC markets.
So we can now trade BBP with a finer grain spread.
Great news, thank you for sharing! How is this great news? In the current bear market the only thing this means is that all the already-dumped coins that were formerly "negatively capped" at 1 sat are now gonna be dumped even further to 1/10th of a satoshi. This includes especially masternode coins and unfortunately also BBP (unless we can pursuate people to buy-and-keep BBP).  |
|
|
|
|
17
|
Alternate cryptocurrencies / Announcements (Altcoins) / Re: BiblePay | 10% Charity | POBH CPU | Sanctuaries (Masternodes) | Orphans
|
on: October 25, 2019, 04:30:59 PM
|
|
Hello everyone,
I haven't really been active the last couple of months, but since yesterday I'm trying the external miner on the NOMP pool. Really nice work so far!
Rob, you mentioned the pool found a block somewhen today. How is the payment for the blocks working? Are they paid as soon as they have matured, or once per day, per week etc.?
Another, unrelated, question: I saw that the Sanctuary Payments are constantly dropping since last week (it's below 1k bbp, going as low as 680), although the number of Sancs has not really increased for weeks or months. How is that calculated?
Thanks in advance and keep up the good work!
|
|
|
|
|
19
|
Alternate cryptocurrencies / Announcements (Altcoins) / Re: BiblePay | 10% Charity | POBH CPU | Sanctuaries (Masternodes) | Orphans
|
on: August 17, 2019, 04:24:31 PM
|
** Cameroon Integration Testing this week **
Note: Cameroon one is planning on releasing the code on their end to prod this week so we can go live soon with POOM.
POOM means you can sponsor an orphan at home personally with Cameroon using fiat or BBP for the monthly expense, referencing the BiblePay Orphan ID (in POOM).
This will then lock your orphan in providing you with rewards from the GSC Cameroon-One campaign (in BBP!)
Note: I will need to set up a temporary campaign in Prod for integration testing only this week. I will be setting up a very small version of Cameroon-One (with 1% of the normal rewards). This is just to ensure things are working properly. Please realize the rewards I receive for this test are actually based on real orphans that I sponsored with real money over 30 days ago (with Anna in Global Giving).
Starting later this month when we switch to the real Cameroon One campaign, we will start over with the voted in budget (50% of the GSC budget).
Wow, that sounds awesome! Will the FIAT sponsoring system be available worldwide or will there be any restrictions on countries/credit card companies etc.? Also, will the orphan expenses get an anually "donation receipt" or something like that to declare at the tax office? |
|
|
|
|
20
|
Alternate cryptocurrencies / Announcements (Altcoins) / Re: BiblePay | 10% Charity | POBH CPU | Sanctuaries (Masternodes) | Orphans
|
on: August 01, 2019, 03:33:29 PM
|
No problem - and on a side note - if you were trying to find a way to use the coin age of an unlocked sanctuary - it is not possible, as the wallet will skip by those amounts - and if a hacker modifies the wallet to force it in the gsc transmission, the sanctuaries will skip by those points anyway (rewarding 0 for them) - just like the sancs skip by 666 tithe variations. So the only way to start pogging from an unlocked sanc coin, is to run it through the bankroll command first. (Or spend it into a different amount). Well, not really, since I specifically left those coins unchecked in coin control before sending "exec sendgscc". But it seems that didn't do the trick. Be that as it may, good to know that there are mechanisms in place for this, although I'm not completely sure why this is necessary. |
|
|
|
|
Show Posts
