 Show Posts
|
|
Pages: [1] 2 3 4 5 »
|
|
What sort of hash rate should be expected from 6x rx470 4gb cards? And with what miner?
And to overcook should only the core clock be increased? What about memory?
Thanks
|
|
|
|
|
if i was selling hosting/rigs 1st thing id do is have a pic of the rigs with ur bitcointalk username and date. obviously this would be more work & difficult if you were scamming, but it hasn't been done despite people asking for it, then you say ur not on here ... yeah that would be perfect then the evidence is not on here for all to see .. and 3 people around the globe? who .. provide usernames .. all your providing is a load of shit
|
|
|
|
I really for the life of me can't figure out what the issue is. I'm trying to set up the Red Dragon itself. I copied the timings from 1500 to everything under it, yet it's still hashing at the same rate. I even copied the 1750 to 2000 as well. When I try to raise the memory clock up to 2100 it goes DOWN. This is one ETH mining only. Maybe I got a bum card?
Its 1500 up not down! - reedit the origional bios and do it correctly |
|
|
|
I have a similar issue. With a Sapphire ITX RX470, I only get around 22 MH/s at stock speed and maybe 23 Mh/s with memory up to 2000. How much would other memory timings / BIOS mod affect the result? I've read about people getting up tp 30 Mh/s out of a RX470, is this also possible for RX570, and is this only becuase of the changed memory timings?!?
A modded bios is definitly required if u want to get anything over 26mhs. If u dont want to do bios mod buy gtx 1070s. These u can just adjust with msi afterburner and u be at 30mhs after u click the mouse |
|
|
|
I did not use dual mining to get my first results, so all figures are ETH only...  My reply was for the person that started the thread, but it may help others too. Since I have a 7x rx470 rig (asus strix OC 4G), I can share some settings with you. Did you made bios mod on the cards? (copy 1500 timings to all the boxes under 1500 in polaris bios?) If yes, then the setting's I'm using on MSI afterburner are as follows: Core Voltage: -96 (can't go -100) Power Limit: -50 (ETH only mining) and +0 (for dual mining) Temp Limit: 90 Core Clock: 1110 Memory Clock: 1950 Fan speed: Auto I'm getting 27,8 Mhs for ETH only, and 20,1 Mhs ETH + 605 Mhs SIA (dual mining) Hope you can replicate the setup and get your hashrate up I also have a rig woth 6x asus strix oc rx 470 (all hynlix) I did 1500 strap up to 2000 -60 core volt 1140 core 1920 mem Fan auto or 65% In open air frame on powered usb 3 risers with biostar tb85 Getting 27.5mhs ethereum and 270mhs sia coin per card @ 90w each stable with a 2 month uptime Soon as i try snd push 1950 ish very unstable |
|
|
|
Got home and played around with things a little. I started with the Red Devil card. I verified that the straps were set correctly. I was able to get 29 mh/s with this card by itself! Core was at 1100, and memory at 2100. Upping the memory to 2200 seemed to drop hashing down to 11? Then I moved onto the Red Dragon. It looked like I missed changing the memory straps on this one. After making the changes I tried mining with it alone and am only getting like 18 mh/s . Looks like the memory is Hynix? Is that the reason it hashed so low? I might have to just sell the Red Dragon I guess and try to find another Red Devil. ETA: The Red Dragon seems to be all over the place with the hashing power. It varies from 5 to 18. Nope dont sell it its definitely a setting somewhere. All 570 and 580 hash around the same With 2 diff cards maybe try use the amd tool to over clock. Or turn the sia intensity down with the +/- buttons on num pad (claymore 9.4) After you do an overclock with msi afterburner/amd wattman always close/restart claymore. Out of interest whats the siacoin hash? Is it the same as the red devil or more as this would indicate an intensity problem. Otherwise id suggest the over clock has only been appied to the 1 card. U can select the red dragon in the gpu option in msi after burner and confirm the over click is applided to it? |
|
|
|
I tried your suggestion and lowered the intensity for sia. That seemed to help a little, but I'm not able to really get over 48=50 mh/s. I've tried upping the memory clock, but I seem to get a BSOD when I push it up to 2200. Anyone have other suggestions? I'm currently mining just ETH, and still seeing the same hash rate.
1. load gpuz see what memory the cards have 2. Make sure u have edited the correct timings some have 1: some 1: & 2: 3. Load amd go to wattman global reset all settings. 4. Run msi afterburner and overclock/underclock select run windows startup 5. Possibly reboot and test with claymore 9.4 6. try connect monitor to gpu then close restart claymore 7. Use -dri 10 for dual siacoin dual mining so eth isnt effected |
|
|
|
|
you want 60, 70, 100. you'll be lucky to get ONE
|
|
|
|
|
sorry to bump an old post...
but is this confirmed to be working safe?
i have 6x asus strix oc rx470's that run on 6 pin pcie, was thinking about running mobo/cpu/ram/ssd/pcie risers off a 650w corsair and powering the gpu's from bitmain apw3+ 1600w (s7 spu) .. just dont want to risk fkn anything.
or would running dual atx be a saver option? as i have a Corsair 1000W RMX sitting idle atm too?
|
|
|
|
Ok, nice, thank you! What is your opinion on gtx 1070? I heard this is a very efficient gpu (electricity is very expensive in Germany , sth like .3$  ) Maybe you're more lucky with your electricity rate in NZ  Yea i hear the gtx 1070 has lower power usage than the amd cards but then there almost twice the price to buy. look at Nicehash you can select your hardware and will give you an idea what it will earn, these are however stock no mod's no overclock results so you can undervolt and overclock memory for better hash at lower power draw |
|
|
|
Sure, I'm glad if I can help. But can I ask you for a little favor in exchange: Can you advise me which GPUs and Coins are the best choice for this board? I had a little break from mining so my knowledge is outdated depends what gpu, if u have amd's (rx470 rx480 rx570 rx580) then Etherereum then use claymore and dual mine Siacoin/Pascal/Libry Coin or decred. i dual mine with rx470, currently the best in my opinion great hash rate of upto 30mhs on ethereum & 270mhs Siacoin and low power usage you can then sell the siacoin to pay for part the power of your rig you can then point it at nicehash and get payed in bitcoin or u can dual mine on pools like Ethermine & Siamining and get payed in the coin you are mining best mining software is Claymore's |
|
|
|
|
i'll place order of 1 unit
shipped to Auckland, New Zealand
payment in bitcoin
|
|
|
|
We have a group buy going on, based in Germany maybe your interested: https://bitcointalk.org/index.php?topic=1942213.0Shipping with DHL wpuld be possible for around 20 EUR. (I'm not the organizer, but the organizer is a trusted member of the german sub forum) ahh yes this is perfect, ive translated it and it looks good. ive sent him a pm thanks! |
|
|
|
|
looking for 1x Asrock H81 Pro BTC
shipping to Auckland, New Zealand
escrow a must
pm me prices,
FYI: ill only buy from trusted members
|
|
|
|
|
Is there any way to have claymore dual ignore the intergrated grapics (a10 with intergrated r7 gpu)
I want to use the intergrated as a display and not mine with it, and only mine with the 4x rx 470s I have in there. I no other miners have options to disable mining of certain gpus.. any help would be grouse
|
|
|
|
wheres the option to pay with bitcoin?? |
|
|
|
|
Hey guys im looking for a few rx 470 4gb
Pm prices with shipping to auckland, new zealand
Escrow is a must
|
|
|
|
i have 2 antminer S7's currently hosted @ Cryptoborea's (allinvain)
looking to sell both.
1 runs fine, however 2nd one has 1 dead board so only runs at half speed
pm me any offers.
sale will definitely be via ESCROW
Bump |
|
|
|
|
