How do I mine this? What algo are you using? Are you p
POW/POS?

We need to shorten the time between when a card 'times out' and when the miner restarts.  I've never seen a card recover from a timeout and often times 3-4 will all timeout at the same time which drops my average hashrate significantly, which also affects my poolside share of a given round.

I mean ideally the AMD cards wouldn't just randomly time out, but if they do, I'd rather just have the process restart than wait for the inevitable crash while hashing at a low rate.

After a lot of head-scratching and tuning with many crashes and poor hash rates, I finally have found a combination of clocks and intensity that allows the 3090Ti to perform well.

WhiteFang is the 3090Ti and it has been running for about 10 hours now without any crashes.

Just got a response from nicehash, I don't really understand the file they are talking about but maybe you do efudd..

Hi,

Unfortunately we do not have these two ASICS. To give you exact instructions
we need to get two tpcdump files, one tcpdump should be from miner which
is connected to remote pool and is working properly and second tcpdump
should be when miner is connected to NiceHash. We are iust assuming where
could be the issue. With tpcdump files we will see exactly where is the issue.

Best regards,
NiceHash Team

I contacted them through their discord, this is what they said..
https://imgur.com/a/mSOHyyq

One thing I would really like to be able to do is run my Z9/mini on nicehash like the A9. I got in contact with bitmain as well as nicehash when I first received my Z9mini. Nicehash said they knew exactly what needed to be changed in the firmware to support them and they had told Bitmain about it before.. When I emailed Bitmain they said they had no intenton to change the firmware to support them. I know I tried to run on nicehash and at the beginning it worked just fine, then about 10 min into running it would just get overloaded with rejected shares and would have to stop it.. I just know 95% of the time nicehash is more profitable to mine and it would be cool to have that option. I know you got alot on your plate Efudd but just something I was interested in. Thanks!

Oooohhh updates?? What kinds of things is there to look forward to, if you don't mind me asking? Also, will these be avalible to people who previously purchased the firmware?

Now if you really want a project all you have to do is figure out how to get the Z9 to mine Equihash 144, 5.. It would be badass to have all the chips split the data requirement and work together.. That would be a crazy firmware project but probably nearly impossible. I would really be interested in some mini upgrades though, I have batch a batch 1 and batch 2 running now. Would be legit if they could push 20k sols a piece.

Hey, we are all super grateful for what you did on here bro.. I don't understand why people have to shit on your efforts. If it was as simple as changing a couple lines of code then more people would have released it. Guess what everyone??? Only one person did! I believe he wanted to help (why he released a 575 for free) as well as get a small return as well for his efforts (Unlocked 650). He didn't have to share it in the first place and could have just kept it but he didn't so why so much hate? BTW chip temps were the problem, set at 70% and kept below 74c and staying stable at 650.

Got it, thanks

Temps stay at 75-76 on 637 but went to 78 on 650.. Only one card drops off after about 5 minutes. I contacted bitmain before and they informed me that the chips were good till 115 so not for sure..

Jealous of people being able to use this up to 650 stable.. I can't go over 637 without one card dropping off. Still getting 55.5k but I know it has more. What would be causing that?

I sent payment for paid version, I cannot respond with txid yet because on the message limit.. I will DM you the txid in 25 minutes when I get another message opprotunity..

Did you happen to enable the messages from newbies? I would be interested in the full firmware purchase/donation but would just need to contact you. Thanks again

Hello, I tried to send you a message about purchase but it says you do not allow messages from newbies. Will you enable this please so I can send message please.