 Show Posts
|
|
Pages: « 1 2 [3] 4 »
|
./configure said OpenCL and ADL sdks where available. (i have fought long enough with compiling cgminer xD) adrian@mine01:~$ export DISPLAY=:0
adrian@mine01:~$ cgminer
[2012-02-09 19:57:58] Started cgminer 2.2.3
No protocol specified
[2012-02-09 19:57:58] Error: Getting Device IDs (num)
[2012-02-09 19:57:58] clDevicesNum returned error, no GPUs usable
All devices disabled, cannot mine!
adrian@mine01:~$
Also adrian@mine01:~/cgminer-2.2.3$ export DISPLAY=:0.0
adrian@mine01:~/cgminer-2.2.3$ cgminer
[2012-02-09 20:01:01] Started cgminer 2.2.3
No protocol specified
[2012-02-09 20:01:02] Error: Getting Device IDs (num)
[2012-02-09 20:01:02] clDevicesNum returned error, no GPUs usable
All devices disabled, cannot mine!
adrian@mine01:~/cgminer-2.2.3$ aticonfig --pplib-cmd "set fanspeed 0 65"
No protocol specified
aticonfig: This program must be run as root when no X server is active
adrian@mine01:~/cgminer-2.2.3$ sudo aticonfig --pplib-cmd "set fanspeed 0 65"
[sudo] password for adrian:
No protocol specified
No protocol specified
ati_pplib_cmd: Unable to open display `:0.1'.
aticonfig: parsing the command-line failed.
i have a 5850 and a 5830 on this machine. |
|
|
|
i had an ubuntu box that was ok running phoenix
but i like cgminer more, so i wanted to compile it (it has ubuntu x86)
I tried, but failed, because ncurses version was not correct.
I then upgraded from 10.04 to 10.11 (all through ssh)
After reinstalling the drivers (ssh -X), i was able to compile cgminer.
but i cant start mining, except with cpu only (on 2.1.2, 2.2.3 has no cpu support i think), it tells me that there is no valid gpu available.
I tried automatically starting cgminer with screen and upstart (like i was told arroung page 178 to 180).
It gives the same error.
i then tried with the same trick i used on debian, and nothing happens.
Im not sure if this PC with ubuntu has any trouble with not having a display connected.
did you accept the 'sdk license?' when, where and how am i supposed to do that ? don't remember doing it on my debian machine. This ubuntu pc is at my parents house (i moved last week xD), and has no display attached right now. Important to mention tho, is that right now, i can't use phoenix either. And ati commands for OC and such, fail as the "normal user" telling me that i MUST start X if i want to run them without being "su", and if i run them with "sudo", they fail too. I guess that my only choice is to go back, plug a display, and see what happens  |
|
|
|
|
i had an ubuntu box that was ok running phoenix
but i like cgminer more, so i wanted to compile it (it has ubuntu x86)
I tried, but failed, because ncurses version was not correct.
I then upgraded from 10.04 to 10.11 (all through ssh)
After reinstalling the drivers (ssh -X), i was able to compile cgminer.
but i cant start mining, except with cpu only (on 2.1.2, 2.2.3 has no cpu support i think), it tells me that there is no valid gpu available.
I tried automatically starting cgminer with screen and upstart (like i was told arroung page 178 to 180).
It gives the same error.
i then tried with the same trick i used on debian, and nothing happens.
Im not sure if this PC with ubuntu has any trouble with not having a display connected.
|
|
|
|
...
I tried with "cgminer web monitor", but it tells me that my VGAs are offline.
...
What options did you use to run cgminer? You of course need --api-listen before anything will work. You need --api-network if the monitoring tool is on a different computer or if the monitoring tool doesn't allow 127.0.0.1 when it is on the same computer Edit: I'm thinking of adding --api-allow IP[/N],IP2[/N2]... not sure about deprecating --api-network - but probably easiest to just leave it (unless ckolivas has a preference about that) i used both options, and this: https://bitcointalk.org/index.php?topic=58834.0that one did not work. Then with the same options, anubis worked. |
|
|
|
i guess its not posible to use it to read more than one pc, right?
Kano code is just an "example" (Kano wrote the RPC code for cgminer BTW). Other people have written multi-rig management/reporting tools which use the RPC functionality in cgminer. There are two web based tools and BAMT uses RPC for both web based tools and console tools.
Temp Load Rate Accept/Invalid Status
192.168.0.181 0: 68.5c+ 99% 372 Mhs 13268/31 (0.23%) up: 1 day, 18:31
1: 75.5c 99% 377 Mhs 13238/28 (0.21%) load: 0.00, 0.00, 0.00
2: 80c+ 99% 380 Mhs 13138/39 (0.30%)
3: 71c+ 99% 381 Mhs 13318/43 (0.32%)
4: 79.5c- 99% 384 Mhs 12976/22 (0.17%)
5: 64c 99% 378 Mhs 13228/28 (0.21%)
192.168.0.182 0: 80.5c 99% 330 Mhs 11629/22 (0.19%) up: 2 days, 11:57
1: 77c+ 99% 379 Mhs 12729/34 (0.27%) load: 0.00, 0.00, 0.00
2: 74.5c 99% 379 Mhs 12652/30 (0.24%)
3: 72.5c 99% 382 Mhs 12568/21 (0.17%)
4: 74c 99% 377 Mhs 12590/31 (0.25%)
5: 72.5c+ 99% 381 Mhs 12651/23 (0.18%)
192.168.0.183 0: 73.5c 0% 331 Mhs 4815/8 (0.17%) up: 17:34
1: 74.5c- 99% 361 Mhs 5326/6 (0.11%) load: 0.04, 0.03, 0.00
2: 67.5c 99% 378 Mhs 5424/6 (0.11%)
3: 67c+ 99% 375 Mhs 5481/11 (0.20%)
4: 71.5c 99% 386 Mhs 5501/7 (0.13%)
5: 69.5c+ 99% 378 Mhs 5540/6 (0.11%)
192.168.0.184 0: 69c 99% 369 Mhs 410/0 (0.00%) up: 1:19
1: 66.5c+ 99% 396 Mhs 367/0 (0.00%) load: 0.00, 0.00, 0.00
2: 68c 99% 361 Mhs 376/0 (0.00%)
3: 64c+ 99% 367 Mhs 404/0 (0.00%)
4: 68c+ 99% 371 Mhs 348/0 (0.00%)
5: 62c 99% 330 Mhs 375/1 (0.27%)
Total: 8968.82 Mhash/s 183140 accepted, 396 invalid (0.22%)
This is the multi-rig monitoring view in BAMT. Also the nice thing about the RPC code (I organized the bounty project BTW) is that if existing solutions don't do what you want it to do, you (or someone else) can also write another one. Since the RPC API is a standardized set of queries it doesn't require modifying the cgminer to implement new "front ends". Off topic: 192.168.0.183's GPU #0 must have bad VRM.  . It will thermally cut out for a second or so every 20 or 30 seconds. The core is not running too hot so it makes me think it is the VRMs. Since mpgumon only gets updates once every 30 seconds or so it will either show 99% or 0% depending on timing. I have dropped that GPU back to stock but it keeps "cycling" on & off. I think it is degraded. So after 9 months on mining with 30 GPU (15x 15970s) I have two "degraded" GPUs. GPU #0 on .183 rig and GPU #5 on the .184 rig (which will crash about once a day - hard hang even on stock w/ low temps). I also have "lost" 2 fans. Be interesting to see what my "attrition" will be at the one year mark. Will look into that. I tried with "cgminer web monitor", but it tells me that my VGAs are offline. Then i installed anubis, flashy and nice, but i would preffer not to have mysql installed. |
|
|
|
...
- Update example web miner.php to use new API commands
Anyone who used the old one this one should be interesting to look at once or twice  (I of course use it to view the status of my rig since it's all in one page) Of course there are other more complex ones out there for pure display only This one also happens to allow you to change everything that the API allows (unless I missed something ) looks neat i guess its not posible to use it to read more than one pc, right? |
|
|
|
Im runnung Debian 6...
I gave up messing with init scripts that start screen sessions and put this in my /etc/rc.local instead su - user -c "/path/to/cgminer/start/script.sh"
Oh, and i use command line arguments, because either on windows or linux, even after saving the config, it ignores me (cgminer always asks for input) This is usually because you have a syntax error in your config. You can see what the errors are if you specify the config. cgminer -c ~/.cgminer/cgminer.conf
I don't know why it is built this way. IMO, when you fail to parse a config, you should fail out, not act like there was no config. Thx about the config, i fixed it, much nicer now XD -- Putting su - rcocchiararo -c "/home/rcocchiararo/bitcoin/startcg.sh" in rc.local seems to do nothing. Running that from a "root terminal" (inside rcocchiararo GUI loggin) nets me a CPU mining session [2012-02-05 12:18:17] Error: Getting Device IDs (num)
[2012-02-05 12:18:17] clDevicesNum returned error, none usable
[2012-02-05 12:18:17] Started cgminer 2.1.2
My script has: #!/bin/bash
export AMDAPPSDKROOT=/opt/AMD-APP-SDK-v2.4-lnx32/
export AMDAPPSDKSAMPLESROOT=/opt/AMD-APP-SDK-v2.4-lnx32/
export LD_LIBRARY_PATH=${AMDAPPSDKROOT}lib/x86:${LD_LIBRARY_PATH}
export DISPLAY=:0
cgminer 2>>/var/log/cgminer.log
Maybe something from my "exports" is not ok ? i mean, just running "cgminer" from a terminal with my user (rcocchiararo) makes it work. (i once had the exports in .bashrc, but i no longer do). also, i believe, at least on my debian system, it wont work to have that in rc.local, because it would be similar to double clicking my script and telling it to "run" instead of "run in terminal". If i do that, this is what happens: [2012-02-05 12:02:55] Started cgminer 2.1.2
[2012-02-05 12:02:56] Long-polling activated for http://pit.deepbit.net:8332/listenChannel
Error opening terminal: unknown. I tried using rc.local to launch screen, but similar things happen, i THINK i got it to run, but it was only with CPU (manually i can confirm it, unless i run it from my users terminal). Maybe the fact that root is unable to login with GUI in debian (at least debian 6) causes cgminer some headaches ? I tried: su - rcocchiararo -c "/usr/bin/screen -dmS Miner /home/rcocchiararo/bitcoin/startcg.sh rcocchiararo" Still, the last "rcocchiararo" seems to do nothing, because i changed that to "pepe" and i even ran: /usr/bin/screen -dmS Miner /home/rcocchiararo/bitcoin/startcg.sh pepe And the user who was running cgminer according to "top" was the one who launched the command (rcocchiararo, not pepe). Im runnung Debian 6 With the following script, i understand that i get the same thing you indicated: #! /bin/sh
### BEGIN INIT INFO
# Provides: cgminer
# Required-Start: $all
# Required-Stop: $remote_fs $syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: mining
# Description: Start BTC Mining
### END INIT INFO
script
sleep 15
cd /home/rcocchiararo/bitcoin
exec /usr/bin/screen -dmS Miner su -c /home/rcocchiararo/bitcoin/startcg.sh rcocchiararo
end script This won't work as a sh script because the script keyword is an Upstart conf file function. You would want to take out both script/end script. I don't know offhand if Debian has Upstart but if it does then the best practice would be to use that by putting this as a conf file in /etc/init. If it doesn't then you could rewrite it as a script by removing the "script / end script" and taking out exec so it just calls screen. I don't think exec is a sh command either. Upstart conf file is not the same as a script. The cgminer config writer doesn't write a fully working config unfortunately. You have to tweak some values - particularly zero ones. My version here does actually write a working config even with engine/memory values that work. But my version of the code is considered too dangerous by ckolivas to include in the mainline since it reads current ADL values to put in the config. There may be instances/cards where it causes problems - for my 5830s it works ok. I thought that might be the case, thats why i tried with and without script/exec, and i still failed ------------- EDIT: success! Finally, by setting a "startup application" to run: /usr/bin/screen -dmS Miner /home/rcocchiararo/bitcoin/startcg.sh rcocchiararo Now my home server mines after rcocchiararo auto logins (that was already configured, but without screen, i had the "no terminal" issue. |
|
|
|
Im runnung Debian 6...
I gave up messing with init scripts that start screen sessions and put this in my /etc/rc.local instead su - user -c "/path/to/cgminer/start/script.sh"
Oh, and i use command line arguments, because either on windows or linux, even after saving the config, it ignores me (cgminer always asks for input) This is usually because you have a syntax error in your config. You can see what the errors are if you specify the config. cgminer -c ~/.cgminer/cgminer.conf
I don't know why it is built this way. IMO, when you fail to parse a config, you should fail out, not act like there was no config. will try that tomoroy (just tried that in an init script and failed, and now i have to run xD) weird if the config file is wrong, cause i made cgminer write it out, but oh well, i will see that tomorow also. thx EDIT: ok, no, i tried something like that but using screen |
|
|
|
im a failure :/
No worries, trial & error is a learning process - personally, I'd rather fail and learn than succeed without understanding why. Try going through this thread and experiment with different methods, then choose the one that works best for you. I've posted this before in this thread but I guess every now and then it's helpful to refresh as it's a long topic and hard to read everything. Assuming Ubuntu, which now uses Upstart the correct way to start cgminer at boot is with a conf file located in /etc/init. This doesn't require any auto-login or other stuff. Just one simple extra file in the right place. Here is a working example that I have used for many months, /etc/init/miner.conf description "Start BTC Mining"
start on runlevel [2345]
stop on runlevel [016]
kill timeout 30
script
sleep 15
cd /home/ubuntu
exec /usr/bin/screen -dmS Miner su -c /usr/local/bin/startcg ubuntu
end script
Note above it runs as user "ubuntu" but you should replace that with your user name. It is more secure to not run as root user, which would be the default during an init process like this. The "sleep" I have there is to allow time for X to be started at boot. There is a better way but this works fine too. I use "screen" to allow me to remote in with ssh and attach/detach as desired. If you're not familiar with that then google it. You can not bother with screen but then it's harder to login remotely and see realtime status. Also, if it's not already installed then "sudo apt-get install screen" would be needed before using this. This conf file starts cgminer by running the startcg script. You can put what you need in there. Mine contains: #!/bin/bash
export AMDAPPSDKROOT=/home/ubuntu/AMD-APP-SDK-v2.4-lnx32/
export LD_LIBRARY_PATH=${AMDAPPSDKROOT}lib/x86:${LD_LIBRARY_PATH}
export DISPLAY=:0
cgminer 2>>/var/log/cgminer.log Yours may be a bit different but typically pretty similar to this. I use cgminer.conf but some people like to use the cmd line args in this file instead. Useful things to know: To start mining manually: sudo start miner To attach to cgminer after remote login: sudo screen -r (I make an alias for this, alias mm='sudo screen -r' and put it in .bashrc file) To detach from within cgminer: <ctrl>A D You can disable starting at boot by renaming the conf file, eg. mv miner.conf miner.conf.down (that's handy when changing GPU cards so they don't start with wrong settings). Im runnung Debian 6 With the following script, i understand that i get the same thing you indicated: #! /bin/sh
### BEGIN INIT INFO
# Provides: cgminer
# Required-Start: $all
# Required-Stop: $remote_fs $syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: mining
# Description: Start BTC Mining
### END INIT INFO
script
sleep 15
cd /home/rcocchiararo/bitcoin
exec /usr/bin/screen -dmS Miner su -c /home/rcocchiararo/bitcoin/startcg.sh rcocchiararo
end script then #!/bin/bash
export AMDAPPSDKROOT=/opt/AMD-APP-SDK-v2.4-lnx32/
export AMDAPPSDKSAMPLESROOT=/opt/AMD-APP-SDK-v2.4-lnx32/
export LD_LIBRARY_PATH=${AMDAPPSDKROOT}lib/x86:${LD_LIBRARY_PATH}
export DISPLAY=:0
cgminer -o http://pit.deepbit.net:8332 -u rcocchiararo@gmail.com_alpha -p 12345 -o http://api2.bitcoin.cz:8332 -u rcocchiararo.alpha -p 12345 --auto-fan --auto-gpu --gpu-engine 950-975 --gpu-memclock 300 --gpu-fan 20-80 --temp-target 65 --temp-overheat 70 --api-listen --api-network -I 9 I originally used your same paths, but after many failures, i ended up changing them (for experimenting, not because they were wrong, in fact, they are perfectly valid for my installation) First of all, im not familiar with "script", but i noticed a "typescript" file apearing here and there (changing places as i changed paths). The most i could get (by chance) was to get cgminer to start in screen, but in cpu mining mode that happened (by chance) automatically (i say by chance, because it was a one time thing, i don't know how i pulled it off, but if, and manually, by running: /usr/bin/screen -dmS Miner su -c /home/rcocchiararo/bitcoin/startcg.sh rcocchiararo exec from terminal just closes terminal. If i run the last command i mentioned with my user (rcocchiararo) it starts cgminer in screen, with gpu mining. If i do it with root (in a root terminal) i get cpu mining Oh, and i use command line arguments, because either on windows or linux, even after saving the config, it ignores me (cgminer always asks for input) |
|
|
|
...
Any pointers into having CGMINER startup automatically on linux ? i have a script in the "startup" folder in windows, but in linux, i found no way of having cgminer actually start either using a script in init.d or via startup applications (gui sesion automatically starts and logs in, i can run other miners via startup applications, but cgminer is my prefered one)
You need the computer to boot into X (login auto) You need to run the script as the user who "auto login"s You need the script to set DISPLAY correctly ... and you need to wait until X has started before starting cgminer. im a failure :/ i originally had this on my script (double clicking it started cgminer correctly, or running it from terminal) /home/rcocchiararo/bitcoin/cgminer-2.1.2/cgminer -o http://pit.deepbit.net:8332 -u user -p pass -o http://api2.bitcoin.cz:8332 -u user -p pass --auto-fan --auto-gpu --gpu-engine 950-975 --gpu-memclock 300 --gpu-fan 20-80 --temp-target 65 --temp-overheat 70 --api-listen --api-network -I 9 putting that in the "startup applications" did nothing. So i changed it to this: (the exports are what i had when i used other miners) #!/bin/bash
export AMDAPPSDKROOT=/opt/AMD-APP-SDK-v2.4-lnx32/
export AMDAPPSDKSAMPLESROOT=/opt/AMD-APP-SDK-v2.4-lnx32/
export LD_LIBRARY_PATH=${AMDAPPSDKROOT}lib/x86:${LD_LIBRARY_PATH}
export DISPLAY=:0.0
cd /home/rcocchiararo/Desktop
killall -9 cgminer
sleep 5
/home/rcocchiararo/bitcoin/cgminer-2.1.2/cgminer -o http://pit.deepbit.net:8332 -u user -p pass -o http://api2.bitcoin.cz:8332 -u user -p pass --auto-fan --auto-gpu --gpu-engine 950-975 --gpu-memclock 300 --gpu-fan 20-80 --temp-target 65 --temp-overheat 70 --api-listen --api-network -I 9 still nothing (o do think that the VGA fans start spining faster tho) |
|
|
|
from 2.2.1 [2012-02-01 00:16:55] Thread 1 being disabled
There's your answer. In 2.2.1, dynamic mode was made "lighter" on the desktop by using only one thread per GPU so that it is virtually not felt by the user. If you are on a dedicated mining rig, you need to give it a static intensity with something like -I 9 instead of leaving it dynamic. buuu Even so, on windows, when setting intensity to 9, 2.1.2 is 5 to 10 mhash faster (on linux with this "disable" it was much more noticeable). My linux machine is a home server, and its almost never used as a desktop, but from time to time i VNC into it, and if i leave it at a high intensity, its unusable -- Any pointers into having CGMINER startup automatically on linux ? i have a script in the "startup" folder in windows, but in linux, i found no way of having cgminer actually start either using a script in init.d or via startup applications (gui sesion automatically starts and logs in, i can run other miners via startup applications, but cgminer is my prefered one) |
|
|
|
from 2.2.1 [2012-02-01 00:16:47] Started cgminer 2.2.1
[2012-02-01 00:16:47] CL Platform vendor: Advanced Micro Devices, Inc.
[2012-02-01 00:16:47] CL Platform name: AMD Accelerated Parallel Processing
[2012-02-01 00:16:47] CL Platform version: OpenCL 1.1 AMD-APP-SDK-v2.4 (595.10)
[2012-02-01 00:16:47] GPU 0 iAdapterIndex 0 strUDID 1280:26782:4098:57719:5963 iBusNumber 5 iDeviceNumber 0 iFunctionNumber 0 iVendorID 4098 strAdapterName ATI Radeon HD 5800 Series
[2012-02-01 00:16:47] GPU 0 ATI Radeon HD 5800 Series hardware monitoring enabled
[2012-02-01 00:16:47] Setting GPU 0 engine clock to 975
[2012-02-01 00:16:47] Setting GPU 0 memory clock to 300
[2012-02-01 00:16:47] Popping work to work thread
[2012-02-01 00:16:47] Testing pool http://pit.deepbit.net:8332
[2012-02-01 00:16:47] Popping work to stage thread
[2012-02-01 00:16:50] Successfully retrieved and deciphered work from pool 0 http://pit.deepbit.net:8332
[2012-02-01 00:16:50] Pushing pooltest work to base pool
[2012-02-01 00:16:50] Pushing work to getwork queue
[2012-02-01 00:16:50] Pool 0 http://pit.deepbit.net:8332 active
[2012-02-01 00:16:50] Popping work to stage thread
[2012-02-01 00:16:50] Testing pool http://api2.bitcoin.cz:8332
[2012-02-01 00:16:50] X-Roll-Ntime found
[2012-02-01 00:16:50] Successfully retrieved and deciphered work from pool 1 http://api2.bitcoin.cz:8332
[2012-02-01 00:16:50] Pushing pooltest work to base pool
[2012-02-01 00:16:50] Pool 1 http://api2.bitcoin.cz:8332 active
[2012-02-01 00:16:50] Pushing work to getwork queue
[2012-02-01 00:16:50] Testing pool http://pit.deepbit.net:8332
[2012-02-01 00:16:50] Popping work to stage thread
[2012-02-01 00:16:51] Successfully retrieved and deciphered work from pool 2 http://pit.deepbit.net:8332
[2012-02-01 00:16:51] Pushing pooltest work to base pool
[2012-02-01 00:16:51] Pushing work to getwork queue
[2012-02-01 00:16:51] Pool 2 http://pit.deepbit.net:8332 active
[2012-02-01 00:16:51] Popping work to stage thread
[2012-02-01 00:16:51] Testing pool http://api2.bitcoin.cz:8332
[2012-02-01 00:16:52] X-Roll-Ntime found
[2012-02-01 00:16:52] Successfully retrieved and deciphered work from pool 3 http://api2.bitcoin.cz:8332
[2012-02-01 00:16:52] Pushing pooltest work to base pool
[2012-02-01 00:16:52] Pushing work to getwork queue
[2012-02-01 00:16:52] Pool 3 http://api2.bitcoin.cz:8332 active
[2012-02-01 00:16:52] Popping work to stage thread
[2012-02-01 00:16:52] Pushing ping to longpoll thread
[2012-02-01 00:16:52] Pushing ping to thread 0
[2012-02-01 00:16:52] Init GPU thread 0 GPU 0 virtual GPU 0
[2012-02-01 00:16:52] Long-polling activated for http://pit.deepbit.net:8332/listenChannel
[2012-02-01 00:16:52] CL Platform vendor: Advanced Micro Devices, Inc.
[2012-02-01 00:16:52] CL Platform name: AMD Accelerated Parallel Processing
[2012-02-01 00:16:52] CL Platform version: OpenCL 1.1 AMD-APP-SDK-v2.4 (595.10)
[2012-02-01 00:16:52] List of devices:
[2012-02-01 00:16:52] 0 Cypress
[2012-02-01 00:16:52] Selected 0: Cypress
[2012-02-01 00:16:52] Preferred vector width reported 4
[2012-02-01 00:16:52] Max work group size reported 256
[2012-02-01 00:16:52] Loaded binary image phatk110817Cypressbitalignv2w128long4.bin
[2012-02-01 00:16:52] Initialising kernel phatk110817.cl with BFI_INT, 2 vectors and worksize 128
[2012-02-01 00:16:53] initCl() finished. Found Cypress
[2012-02-01 00:16:53] Pushing ping to thread 1
[2012-02-01 00:16:53] Init GPU thread 1 GPU 0 virtual GPU 0
[2012-02-01 00:16:53] CL Platform vendor: Advanced Micro Devices, Inc.
[2012-02-01 00:16:53] CL Platform name: AMD Accelerated Parallel Processing
[2012-02-01 00:16:53] CL Platform version: OpenCL 1.1 AMD-APP-SDK-v2.4 (595.10)
[2012-02-01 00:16:53] List of devices:
[2012-02-01 00:16:53] 0 Cypress
[2012-02-01 00:16:53] Selected 0: Cypress
[2012-02-01 00:16:53] Preferred vector width reported 4
[2012-02-01 00:16:53] Max work group size reported 256
[2012-02-01 00:16:53] Popping ping in miner thread
[2012-02-01 00:16:53] Popping work from get queue to get work
[2012-02-01 00:16:53] Loaded binary image phatk110817Cypressbitalignv2w128long4.bin
[2012-02-01 00:16:53] Initialising kernel phatk110817.cl with BFI_INT, 2 vectors and worksize 128
[2012-02-01 00:16:54] initCl() finished. Found Cypress
[2012-02-01 00:16:54] 2 gpu miner threads started
[2012-02-01 00:16:54] Popping ping in miner thread
[2012-02-01 00:16:54] Popping work from get queue to get work
[2012-02-01 00:16:55] Thread 1 being disabled
[2012-02-01 00:16:55] Popping wakeup ping in miner thread
[2012-02-01 00:16:57] 50.5 C F: 80%(3482RPM) E: 975MHz M: 300Mhz V: 1.163V A: 0% P: 0%
[2012-02-01 00:16:58] [thread 0: 758349824 hashes, 151285850 khash/sec]
[2012-02-01 00:16:59] --donation is disabled, please consider just 0.5% :-(
[2012-02-01 00:16:59] API running in UNRESTRICTED access mode
[2012-02-01 00:17:00] 53.0 C F: 80%(3477RPM) E: 975MHz M: 300Mhz V: 1.163V A: 66% P: 0%
[2012-02-01 00:17:03] 54.0 C F: 80%(3471RPM) E: 975MHz M: 300Mhz V: 1.163V A: 78% P: 0%
[2012-02-01 00:17:03] [thread 0: 1380253696 hashes, 273486259 khash/sec]
[2012-02-01 00:17:06] Temperature 3 degrees below target, decreasing fanspeed
[2012-02-01 00:17:06] Setting GPU 0 fan percentage to 79
[2012-02-01 00:17:06] 53.0 C F: 79%(3489RPM) E: 975MHz M: 300Mhz V: 1.163V A: 89% P: 0%
[2012-02-01 00:17:08] [thread 0: 1118403584 hashes, 222136866 khash/sec]
[2012-02-01 00:17:09] 53.5 C F: 79%(3444RPM) E: 975MHz M: 300Mhz V: 1.163V A: 76% P: 0%
[2012-02-01 00:17:12] Temperature 3 degrees below target, decreasing fanspeed
[2012-02-01 00:17:12] Setting GPU 0 fan percentage to 78
[2012-02-01 00:17:12] 52.5 C F: 78%(3470RPM) E: 975MHz M: 300Mhz V: 1.163V A: 72% P: 0%
[2012-02-01 00:17:12] Popping work from get queue to get work
[2012-02-01 00:17:13] [thread 0: 1118683136 hashes, 222251719 khash/sec]
[2012-02-01 00:17:15] 54.5 C F: 78%(3367RPM) E: 975MHz M: 300Mhz V: 1.163V A: 79% P: 0%
[2012-02-01 00:17:18] 55.5 C F: 78%(3375RPM) E: 975MHz M: 300Mhz V: 1.163V A: 83% P: 0%
[2012-02-01 00:17:18] [thread 0: 1388314624 hashes, 276918899 khash/sec]
[2012-02-01 00:17:21] Temperature 3 degrees below target, decreasing fanspeed
[2012-02-01 00:17:21] Setting GPU 0 fan percentage to 77
[2012-02-01 00:17:21] 55.5 C F: 77%(3375RPM) E: 975MHz M: 300Mhz V: 1.163V A: 86% P: 0%
[2012-02-01 00:17:23] [thread 0: 1292304384 hashes, 257636081 khash/sec]
[2012-02-01 00:17:24] Queueing getwork request to work thread
[2012-02-01 00:17:24] Popping work to work thread
[2012-02-01 00:17:24] DBG: sending http://pit.deepbit.net:8332 get RPC call: {"method": "getwork", "params": [], "id":0}
[2012-02-01 00:17:24] Temperature 3 degrees below target, decreasing fanspeed
[2012-02-01 00:17:24] Setting GPU 0 fan percentage to 76
[2012-02-01 00:17:24] 55.0 C F: 76%(3342RPM) E: 975MHz M: 300Mhz V: 1.163V A: 79% P: 0%
[2012-02-01 00:17:24] Pushing work to requesting thread
[2012-02-01 00:17:24] Pushing work to getwork queue
[2012-02-01 00:17:24] Popping work to stage thread
[2012-02-01 00:17:27] Temperature 3 degrees below target, decreasing fanspeed
[2012-02-01 00:17:27] Setting GPU 0 fan percentage to 75
[2012-02-01 00:17:27] 54.5 C F: 75%(3310RPM) E: 975MHz M: 300Mhz V: 1.163V A: 74% P: 0%
[2012-02-01 00:17:28] [thread 0: 850003712 hashes, 168812740 khash/sec]
[2012-02-01 00:17:30] 55.5 C F: 75%(3251RPM) E: 975MHz M: 300Mhz V: 1.163V A: 70% P: 0%
[2012-02-01 00:17:30] Popping work from get queue to get work
[2012-02-01 00:17:31] GPU 0 found something?
[2012-02-01 00:17:31] Proof: 00000000b71c59f7a29c825eb0c5c005ed0f801b935417503cf466263c05b16b
Target: 00000000ffffffffffffffffffffffffffffffffffffffffffffffffffffffff
TrgVal? YES (hash < target)
[2012-02-01 00:17:31] Pushing submit work to work thread
[2012-02-01 00:17:31] Popping work to work thread
[2012-02-01 00:17:31] DBG: sending http://api2.bitcoin.cz:8332 submit RPC call: {"method": "getwork", "params": [ "0000000162236c5eac4bd0f3e4e63a2d00e8e0819e4d5a3215b09c9d00000c41000000008ec4090ffae15dfc14b4e5f59e1e0608ada8ac53a79f967da643fb554ff3cbac4f28aced1a0cd43f048cda01000000800000000000000000000000000000000000000000000000000000000000000000000000000000000080020000" ], "id":1}
[2012-02-01 00:17:31] X-Roll-Ntime found
[2012-02-01 00:17:31] PROOF OF WORK RESULT: true (yay!!!)
[2012-02-01 00:17:31] Accepted 00000000.b71c59f7.a29c825e GPU 0 thread 0 pool 3
GPU0 56.0C 3249RPM | (5s):186.4 (avg):218.9 Mh/s | A:1 R:0 HW:0 U:1.66/m I: 4
[2012-02-01 00:17:31] GPU0 56.0C 3249RPM | (5s):186.4 (avg):218.9 Mh/s | A:1 R:0 HW:0 U:1.66/m I: 4
[2012-02-01 00:17:33] Temperature 3 degrees below target, decreasing fanspeed
[2012-02-01 00:17:33] Setting GPU 0 fan percentage to 74
[2012-02-01 00:17:33] 56.5 C F: 74%(3249RPM) E: 975MHz M: 300Mhz V: 1.163V A: 75% P: 0%
[2012-02-01 00:17:33] [thread 0: 1319632896 hashes, 263072331 khash/sec]
[2012-02-01 00:17:36] Temperature 3 degrees below target, decreasing fanspeed
[2012-02-01 00:17:36] Setting GPU 0 fan percentage to 73
[2012-02-01 00:17:36] 56.5 C F: 73%(3213RPM) E: 975MHz M: 300Mhz V: 1.163V A: 86% P: 0%
[2012-02-01 00:17:38] [thread 0: 1416888320 hashes, 282700258 khash/sec]
[2012-02-01 00:17:39] Temperature 3 degrees below target, decreasing fanspeed
[2012-02-01 00:17:39] Setting GPU 0 fan percentage to 72
[2012-02-01 00:17:39] 57.0 C F: 72%(3180RPM) E: 975MHz M: 300Mhz V: 1.163V A: 89% P: 0%
[2012-02-01 00:17:41] Queueing getwork request to work thread
[2012-02-01 00:17:41] Popping work to work thread
[2012-02-01 00:17:41] DBG: sending http://pit.deepbit.net:8332 get RPC call: {"method": "getwork", "params": [], "id":0}
[2012-02-01 00:17:42] Pushing work to requesting thread
[2012-02-01 00:17:42] Pushing work to getwork queue
[2012-02-01 00:17:42] Popping work to stage thread
[2012-02-01 00:17:42] Temperature 3 degrees below target, decreasing fanspeed
[2012-02-01 00:17:42] Setting GPU 0 fan percentage to 71
[2012-02-01 00:17:42] 56.5 C F: 71%(3106RPM) E: 975MHz M: 300Mhz V: 1.163V A: 87% P: 0%
[2012-02-01 00:17:43] [thread 0: 1270874112 hashes, 253131868 khash/sec]
[2012-02-01 00:17:45] 57.5 C F: 71%(3068RPM) E: 975MHz M: 300Mhz V: 1.163V A: 83% P: 0%
[2012-02-01 00:17:48] Temperature 3 degrees below target, decreasing fanspeed
[2012-02-01 00:17:48] Setting GPU 0 fan percentage to 70
[2012-02-01 00:17:48] 57.0 C F: 70%(3072RPM) E: 975MHz M: 300Mhz V: 1.163V A: 68% P: 0%
[2012-02-01 00:17:48] Popping work from get queue to get work
[2012-02-01 00:17:48] [thread 0: 976819968 hashes, 194189304 khash/sec]
[2012-02-01 00:17:51] Temperature 3 degrees below target, decreasing fanspeed
[2012-02-01 00:17:51] Setting GPU 0 fan percentage to 69
[2012-02-01 00:17:51] 54.0 C F: 69%(3070RPM) E: 975MHz M: 300Mhz V: 1.163V A: 59% P: 0%
[2012-02-01 00:17:53] [thread 0: 936970752 hashes, 186360113 khash/sec]
[2012-02-01 00:17:54] 57.0 C F: 69%(2959RPM) E: 975MHz M: 300Mhz V: 1.163V A: 67% P: 0%
[2012-02-01 00:17:57] Temperature 3 degrees below target, decreasing fanspeed
[2012-02-01 00:17:57] Setting GPU 0 fan percentage to 68
[2012-02-01 00:17:57] 58.0 C F: 68%(2956RPM) E: 975MHz M: 300Mhz V: 1.163V A: 80% P: 0%
[2012-02-01 00:17:58] [thread 0: 1379270656 hashes, 275003819 khash/sec]
[2012-02-01 00:17:58] GPU 0 found something? /m
[2012-02-01 00:17:58] Proof: 00000000e29f0ca00a56bb797d860ae5452e1dbe9c6c966daeadc0a46c62b2a1
Target: 00000000ffffffffffffffffffffffffffffffffffffffffffffffffffffffff
TrgVal? YES (hash < target)
[2012-02-01 00:17:58] Pushing submit work to work thread
[2012-02-01 00:17:58] Popping work to work thread
[2012-02-01 00:17:58] DBG: sending http://pit.deepbit.net:8332 submit RPC call: {"method": "getwork", "params": [ "0000000162236c5eac4bd0f3e4e63a2d00e8e0819e4d5a3215b09c9d00000c410000000013736002dd8a15dfe5254b9a4499a5bdd43e54bc266dc5bb0b6ebd65550b458f4f28acf61a0cd43fe3da8690000000800000000000000000000000000000000000000000000000000000000000000000000000000000000080020000" ], "id":1}
[2012-02-01 00:17:59] PROOF OF WORK RESULT: true (yay!!!)
[2012-02-01 00:17:59] Accepted 00000000.e29f0ca0.0a56bb79 GPU 0 thread 0 pool 0
GPU0 58.0C 2923RPM | (5s):262.2 (avg):229.6 Mh/s | A:2 R:0 HW:0 U:1.81/m I: 4
[2012-02-01 00:17:59] GPU0 58.0C 2923RPM | (5s):262.2 (avg):229.6 Mh/s | A:2 R:0 HW:0 U:1.81/m I: 4
[2012-02-01 00:18:00] Queueing getwork request to work thread
[2012-02-01 00:18:00] Popping work to work thread
[2012-02-01 00:18:00] DBG: sending http://pit.deepbit.net:8332 get RPC call: {"method": "getwork", "params": [], "id":0}
[2012-02-01 00:18:00] 57.5 C F: 68%(2933RPM) E: 975MHz M: 300Mhz V: 1.163V A: 88% P: 0%
[2012-02-01 00:18:01] Pushing work to requesting thread
[2012-02-01 00:18:01] Pushing work to getwork queue
[2012-02-01 00:18:01] Popping work to stage thread
[2012-02-01 00:18:03] [thread 0: 1361575936 hashes, 271657504 khash/sec]
[2012-02-01 00:18:03] Temperature 3 degrees below target, decreasing fanspeed
[2012-02-01 00:18:03] Setting GPU 0 fan percentage to 67
[2012-02-01 00:18:03] 58.0 C F: 67%(2918RPM) E: 975MHz M: 300Mhz V: 1.163V A: 87% P: 0%
[2012-02-01 00:18:05] Popping work from get queue to get work
[2012-02-01 00:18:06] Temperature 3 degrees below target, decreasing fanspeed
[2012-02-01 00:18:06] Setting GPU 0 fan percentage to 66
[2012-02-01 00:18:06] 58.5 C F: 66%(2845RPM) E: 975MHz M: 300Mhz V: 1.163V A: 89% P: 0%
[2012-02-01 00:18:08] [thread 0: 1396703232 hashes, 278221694 khash/sec]
[2012-02-01 00:18:09] 59.0 C F: 66%(2821RPM) E: 975MHz M: 300Mhz V: 1.163V A: 90% P: 0%
[2012-02-01 00:18:12] GPU 0 found something?
[2012-02-01 00:18:12] Proof: 0000000028ebcba99e615143d13eb86e05d39fe3060c4f011b6d0c1a0ad6760d
Target: 00000000ffffffffffffffffffffffffffffffffffffffffffffffffffffffff
TrgVal? YES (hash < target)
[2012-02-01 00:18:12] Pushing submit work to work thread
[2012-02-01 00:18:12] Popping work to work thread
[2012-02-01 00:18:12] DBG: sending http://pit.deepbit.net:8332 submit RPC call: {"method": "getwork", "params": [ "0000000162236c5eac4bd0f3e4e63a2d00e8e0819e4d5a3215b09c9d00000c4100000000f72ca000b7171dedc08e26ff689e8e7ff19a5a581bd368f8056cf45a8d0336dd4f28ad051a0cd43f0ea6de6f000000800000000000000000000000000000000000000000000000000000000000000000000000000000000080020000" ], "id":1}
[2012-02-01 00:18:12] Temperature 3 degrees below target, decreasing fanspeed
[2012-02-01 00:18:12] Setting GPU 0 fan percentage to 65
[2012-02-01 00:18:12] 59.0 C F: 65%(2822RPM) E: 975MHz M: 300Mhz V: 1.163V A: 90% P: 0%
[2012-02-01 00:18:13] PROOF OF WORK RESULT: true (yay!!!)
[2012-02-01 00:18:13] Accepted 00000000.28ebcba9.9e615143 GPU 0 thread 0 pool 0
GPU0 59.0C 2812RPM | (5s):263.4 (avg):235.5 Mh/s | A:3 R:0 HW:0 U:2.36/m I: 4
[2012-02-01 00:18:13] GPU0 58.5C 2812RPM | (5s):263.4 (avg):235.5 Mh/s | A:3 R:0 HW:0 U:2.36/m I: 4
[2012-02-01 00:18:13] [thread 0: 1324154880 hashes, 264269614 khash/sec]
[2012-02-01 00:18:15] Temperature 3 degrees below target, decreasing fanspeed
[2012-02-01 00:18:15] Setting GPU 0 fan percentage to 64
[2012-02-01 00:18:15] 59.0 C F: 64%(2781RPM) E: 975MHz M: 300Mhz V: 1.163V A: 86% P: 0%
[2012-02-01 00:18:16] Queueing getwork request to work thread
[2012-02-01 00:18:16] Popping work to work thread
[2012-02-01 00:18:16] DBG: sending http://pit.deepbit.net:8332 get RPC call: {"method": "getwork", "params": [], "id":0}
[2012-02-01 00:18:17] Pushing work to requesting thread
[2012-02-01 00:18:17] Pushing work to getwork queue
[2012-02-01 00:18:17] Popping work to stage thread
[2012-02-01 00:18:18] [thread 0: 1348075520 hashes, 268956698 khash/sec]
[2012-02-01 00:18:18] Temperature 3 degrees below target, decreasing fanspeed
[2012-02-01 00:18:18] Setting GPU 0 fan percentage to 63
[2012-02-01 00:18:18] 59.5 C F: 63%(2715RPM) E: 975MHz M: 300Mhz V: 1.163V A: 85% P: 0%
[2012-02-01 00:18:21] Popping work from get queue to get work
[2012-02-01 00:18:21] 60.0 C F: 63%(2685RPM) E: 975MHz M: 300Mhz V: 1.163V A: 87% P: 0%
[2012-02-01 00:18:23] [thread 0: 1370554368 hashes, 273205525 khash/sec]
[2012-02-01 00:18:24] Temperature 3 degrees below target, decreasing fanspeed
[2012-02-01 00:18:24] Setting GPU 0 fan percentage to 62
[2012-02-01 00:18:24] 60.5 C F: 62%(2680RPM) E: 975MHz M: 300Mhz V: 1.163V A: 88% P: 0%
[2012-02-01 00:18:27] Temperature 3 degrees below target, decreasing fanspeed
[2012-02-01 00:18:27] Setting GPU 0 fan percentage to 61
[2012-02-01 00:18:27] 61.0 C F: 61%(2637RPM) E: 975MHz M: 300Mhz V: 1.163V A: 90% P: 0%
[2012-02-01 00:18:28] [thread 0: 1388183552 hashes, 276899051 khash/sec]
[2012-02-01 00:18:30] 60.5 C F: 61%(2556RPM) E: 975MHz M: 300Mhz V: 1.163V A: 90% P: 0%
[2012-02-01 00:18:32] Queueing getwork request to work thread
[2012-02-01 00:18:32] Popping work to work thread
[2012-02-01 00:18:32] DBG: sending http://pit.deepbit.net:8332 get RPC call: {"method": "getwork", "params": [], "id":0}
[2012-02-01 00:18:32] Pushing work to requesting thread
[2012-02-01 00:18:32] Pushing work to getwork queue
[2012-02-01 00:18:32] Popping work to stage thread
[2012-02-01 00:18:33] [thread 0: 1354891264 hashes, 270292575 khash/sec]
[2012-02-01 00:18:33] Temperature 3 degrees below target, decreasing fanspeed
[2012-02-01 00:18:33] Setting GPU 0 fan percentage to 60
[2012-02-01 00:18:33] 61.0 C F: 60%(2564RPM) E: 975MHz M: 300Mhz V: 1.163V A: 87% P: 0%
from 2.1.2 [2012-02-01 00:21:02] Started cgminer 2.1.2
[2012-02-01 00:21:02] Popping work to work thread
[2012-02-01 00:21:02] Testing pool http://pit.deepbit.net:8332
[2012-02-01 00:21:02] Popping work to stage thread
[2012-02-01 00:21:02] Successfully retrieved and deciphered work from pool 0 http://pit.deepbit.net:8332
[2012-02-01 00:21:02] Pushing pooltest work to base pool
[2012-02-01 00:21:02] Pool 0 http://pit.deepbit.net:8332 active
[2012-02-01 00:21:02] Pushing work to getwork queue
[2012-02-01 00:21:02] Testing pool http://api2.bitcoin.cz:8332
[2012-02-01 00:21:02] Popping work to stage thread
[2012-02-01 00:21:03] X-Roll-Ntime found
[2012-02-01 00:21:03] Successfully retrieved and deciphered work from pool 1 http://api2.bitcoin.cz:8332
[2012-02-01 00:21:03] Pushing pooltest work to base pool
[2012-02-01 00:21:03] Pool 1 http://api2.bitcoin.cz:8332 active
[2012-02-01 00:21:03] Pushing work to getwork queue
[2012-02-01 00:21:03] Popping work to stage thread
[2012-02-01 00:21:03] Pushing ping to longpoll thread
[2012-02-01 00:21:03] Long-polling activated for http://pit.deepbit.net:8332/listenChannel
[2012-02-01 00:21:03] Setting GPU 0 engine clock to 975
[2012-02-01 00:21:03] Setting GPU 0 memory clock to 300
[2012-02-01 00:21:03] Pushing ping to thread 0
[2012-02-01 00:21:03] Init GPU thread 0
[2012-02-01 00:21:03] List of devices:
[2012-02-01 00:21:03] 0 Cypress
[2012-02-01 00:21:03] Selected 0: Cypress
[2012-02-01 00:21:03] Preferred vector width reported 4
[2012-02-01 00:21:03] Max work group size reported 256
[2012-02-01 00:21:03] Loaded binary image phatk110817Cypressbitalignv2w128long4.bin
[2012-02-01 00:21:03] Initialising kernel phatk110817.cl with BFI_INT patching, 2 vectors and worksize 128
[2012-02-01 00:21:04] initCl() finished. Found Cypress
[2012-02-01 00:21:04] Pushing ping to thread 1
[2012-02-01 00:21:04] Init GPU thread 1
[2012-02-01 00:21:04] List of devices:
[2012-02-01 00:21:04] 0 Cypress
[2012-02-01 00:21:04] Selected 0: Cypress
[2012-02-01 00:21:04] Preferred vector width reported 4
[2012-02-01 00:21:04] Max work group size reported 256
[2012-02-01 00:21:04] Popping ping in gpuminer thread
[2012-02-01 00:21:04] Popping work from get queue to get work
[2012-02-01 00:21:04] Loaded binary image phatk110817Cypressbitalignv2w128long4.bin
[2012-02-01 00:21:04] Initialising kernel phatk110817.cl with BFI_INT patching, 2 vectors and worksize 128
[2012-02-01 00:21:05] initCl() finished. Found Cypress
[2012-02-01 00:21:05] 2 gpu miner threads started
[2012-02-01 00:21:05] 0 cpu miner threads started, using SHA256 'c' algorithm.
[2012-02-01 00:21:05] Popping ping in gpuminer thread
[2012-02-01 00:21:05] Queueing getwork request to work thread
[2012-02-01 00:21:05] Popping work from get queue to get work
[2012-02-01 00:21:05] Successfully rolled work
[2012-02-01 00:21:05] Pushing divided work to get queue head
[2012-02-01 00:21:05] Popping work to work thread
[2012-02-01 00:21:05] DBG: sending http://pit.deepbit.net:8332 get RPC call: {"method": "getwork", "params": [], "id":0}
[2012-02-01 00:21:05] [thread 0: 75825152 hashes, 75739869 khash/sec]
[2012-02-01 00:21:06] Pushing work to requesting thread
[2012-02-01 00:21:06] Pushing work to getwork queue
[2012-02-01 00:21:06] Popping work to stage thread
[2012-02-01 00:21:06] [thread 1: 31522816 hashes, 31497555 khash/sec]
[2012-02-01 00:21:06] [thread 0: 30572544 hashes, 30390263 khash/sec]
[2012-02-01 00:21:07] [thread 1: 17686528 hashes, 17653181 khash/sec]
[2012-02-01 00:21:07] [thread 0: 17076224 hashes, 17012360 khash/sec]
[2012-02-01 00:21:08] 63.5 C F: 80%(3461RPM) E: 975MHz M: 300Mhz V: 1.163V A: 90% P: 0%
[2012-02-01 00:21:08] [thread 1: 22511616 hashes, 22504910 khash/sec]
[2012-02-01 00:21:08] [thread 0: 19595264 hashes, 19493682 khash/sec]
[2012-02-01 00:21:09] [thread 1: 20451328 hashes, 20118448 khash/sec]
[2012-02-01 00:21:09] [thread 0: 17571840 hashes, 17505285 khash/sec]
[2012-02-01 00:21:10] --donation is disabled, please consider just 0.5% :-(
[2012-02-01 00:21:10] API bind to port 4028 failed - trying again in 15sec
[2012-02-01 00:21:10] [thread 1: 30494720 hashes, 30445398 khash/sec]
[2012-02-01 00:21:10] [thread 0: 30150656 hashes, 30007520 khash/sec]
[2012-02-01 00:21:11] 62.5 C F: 68%(2989RPM) E: 975MHz M: 300Mhz V: 1.163V A: 88% P: 0%
[2012-02-01 00:21:11] [thread 1: 24653824 hashes, 24508708 khash/sec]
[2012-02-01 00:21:11] [thread 0: 24264704 hashes, 24237219 khash/sec]
[2012-02-01 00:21:12] [thread 1: 30765056 hashes, 30728090 khash/sec]
[2012-02-01 00:21:12] [thread 0: 31965184 hashes, 31892374 khash/sec]
[2012-02-01 00:21:13] [thread 1: 19521536 hashes, 19281463 khash/sec]
[2012-02-01 00:21:13] [thread 0: 21700608 hashes, 21684128 khash/sec]
[2012-02-01 00:21:14] 62.5 C F: 68%(2931RPM) E: 975MHz M: 300Mhz V: 1.163V A: 84% P: 0%
[2012-02-01 00:21:14] [thread 1: 33218560 hashes, 33108639 khash/sec]
[2012-02-01 00:21:14] [thread 0: 33730560 hashes, 33615762 khash/sec]
[2012-02-01 00:21:15] [thread 1: 26034176 hashes, 25932572 khash/sec]
[2012-02-01 00:21:15] [thread 0: 28147712 hashes, 28140227 khash/sec]
[2012-02-01 00:21:16] [thread 1: 22468608 hashes, 22374523 khash/sec]
[2012-02-01 00:21:16] [thread 0: 21831680 hashes, 21820748 khash/sec]
[2012-02-01 00:21:17] 63.5 C F: 69%(2971RPM) E: 975MHz M: 300Mhz V: 1.163V A: 88% P: 0%
[2012-02-01 00:21:17] [thread 1: 22839296 hashes, 22607076 khash/sec]
[2012-02-01 00:21:17] [thread 0: 24510464 hashes, 24365271 khash/sec]
[2012-02-01 00:21:18] [thread 0: 20054016 hashes, 19984331 khash/sec]
[2012-02-01 00:21:18] [thread 1: 20152320 hashes, 19996487 khash/sec]
[2012-02-01 00:21:19] [thread 0: 13606912 hashes, 13577341 khash/sec]
[2012-02-01 00:21:19] [thread 1: 13467648 hashes, 13395766 khash/sec]
[2012-02-01 00:21:20] 63.0 C F: 69%(2969RPM) E: 975MHz M: 300Mhz V: 1.163V A: 93% P: 0%
[2012-02-01 00:21:20] [thread 0: 16171008 hashes, 16154385 khash/sec]
[2012-02-01 00:21:20] [thread 1: 17924096 hashes, 17858057 khash/sec]
[2012-02-01 00:21:21] [thread 0: 14254080 hashes, 14166235 khash/sec]
[2012-02-01 00:21:21] [thread 1: 15826944 hashes, 15771193 khash/sec]
[2012-02-01 00:21:22] [thread 0: 13836288 hashes, 13811896 khash/sec]
[2012-02-01 00:21:22] [thread 1: 14622720 hashes, 14598049 khash/sec]
[2012-02-01 00:21:23] 63.5 C F: 69%(2974RPM) E: 975MHz M: 300Mhz V: 1.163V A: 95% P: 0%
[2012-02-01 00:21:23] [thread 0: 14073856 hashes, 14039165 khash/sec]
[2012-02-01 00:21:23] [thread 1: 12697600 hashes, 12664621 khash/sec]
[2012-02-01 00:21:24] [thread 0: 37240832 hashes, 36968522 khash/sec]
[2012-02-01 00:21:24] [thread 1: 36073472 hashes, 35983190 khash/sec]
[2012-02-01 00:21:25] API bind to port 4028 failed - trying again in 15sec
[2012-02-01 00:21:25] [thread 1: 13972480 hashes, 13969868 khash/sec]
[2012-02-01 00:21:25] [thread 0: 13750528 hashes, 13710657 khash/sec]
[2012-02-01 00:21:26] 63.5 C F: 69%(2959RPM) E: 975MHz M: 300Mhz V: 1.163V A: 93% P: 0%
[2012-02-01 00:21:26] [thread 1: 16334848 hashes, 16314390 khash/sec]
[2012-02-01 00:21:26] [thread 0: 17448960 hashes, 17361303 khash/sec]
[2012-02-01 00:21:27] [thread 1: 14434304 hashes, 14414254 khash/sec]
[2012-02-01 00:21:27] [thread 0: 13828096 hashes, 13759916 khash/sec]
[2012-02-01 00:21:28] [thread 1: 9117696 hashes, 9111227 khash/sec]
[2012-02-01 00:21:28] [thread 0: 9797632 hashes, 9790475 khash/sec]
[2012-02-01 00:21:29] 63.5 C F: 70%(3038RPM) E: 975MHz M: 300Mhz V: 1.163V A: 93% P: 0%
[2012-02-01 00:21:29] [thread 1: 16404480 hashes, 16298653 khash/sec]
[2012-02-01 00:21:29] [thread 0: 15638528 hashes, 15595111 khash/sec]
[2012-02-01 00:21:30] [thread 1: 15810560 hashes, 15781884 khash/sec]
[2012-02-01 00:21:30] [thread 0: 15892480 hashes, 15805612 khash/sec]
[2012-02-01 00:21:31] [thread 1: 14630912 hashes, 14612369 khash/sec]
[2012-02-01 00:21:31] [thread 0: 13729792 hashes, 13708927 khash/sec]
[2012-02-01 00:21:32] 64.0 C F: 69%(2967RPM) E: 975MHz M: 300Mhz V: 1.163V A: 93% P: 0%
[2012-02-01 00:21:32] [thread 0: 25159680 hashes, 25045448 khash/sec]
[2012-02-01 00:21:32] [thread 1: 20664320 hashes, 20413943 khash/sec]
[2012-02-01 00:21:33] [thread 0: 30572544 hashes, 30513470 khash/sec]
[2012-02-01 00:21:33] [thread 1: 30769152 hashes, 30595370 khash/sec]
[2012-02-01 00:21:34] [thread 0: 13320704 hashes, 13295655 khash/sec]
[2012-02-01 00:21:34] [thread 1: 13392896 hashes, 13317929 khash/sec]
[2012-02-01 00:21:35] 64.0 C F: 69%(2968RPM) E: 975MHz M: 300Mhz V: 1.163V A: 91% P: 0%
[2012-02-01 00:21:35] [thread 0: 14114816 hashes, 14111401 khash/sec]
[2012-02-01 00:21:35] [thread 1: 13918208 hashes, 13901429 khash/sec]
[2012-02-01 00:21:36] [thread 0: 24092672 hashes, 23923081 khash/sec]
[2012-02-01 00:21:36] [thread 1: 25395200 hashes, 25227337 khash/sec]
[2012-02-01 00:21:37] [thread 0: 19677184 hashes, 19660394 khash/sec]
[2012-02-01 00:21:37] [thread 1: 19406848 hashes, 19401668 khash/sec]
[2012-02-01 00:21:38] 64.0 C F: 69%(2962RPM) E: 975MHz M: 300Mhz V: 1.163V A: 92% P: 0%
[2012-02-01 00:21:38] [thread 0: 19103744 hashes, 19082486 khash/sec]
[2012-02-01 00:21:38] [thread 1: 18268160 hashes, 18124343 khash/sec]
[2012-02-01 00:21:39] [thread 0: 20086784 hashes, 20048912 khash/sec]
[2012-02-01 00:21:39] [thread 1: 20217856 hashes, 20199353 khash/sec]
[2012-02-01 00:21:40] API bind to port 4028 failed - trying again in 15sec
[2012-02-01 00:21:40] [thread 0: 20840448 hashes, 20790945 khash/sec]
[2012-02-01 00:21:40] [thread 1: 20774912 hashes, 20651848 khash/sec]
[2012-02-01 00:21:41] 63.0 C F: 70%(3037RPM) E: 975MHz M: 300Mhz V: 1.163V A: 92% P: 0%
[2012-02-01 00:21:41] [thread 0: 21610496 hashes, 21500050 khash/sec]
[2012-02-01 00:21:41] [thread 1: 19447808 hashes, 19446233 khash/sec]
[2012-02-01 00:21:42] [thread 0: 44965888 hashes, 44931381 khash/sec]
[2012-02-01 00:21:42] [thread 1: 48021504 hashes, 47923883 khash/sec]
[2012-02-01 00:21:43] [thread 0: 13574144 hashes, 13548821 khash/sec]
[2012-02-01 00:21:43] [thread 1: 15749120 hashes, 15746128 khash/sec]
[2012-02-01 00:21:44] 63.5 C F: 69%(2976RPM) E: 975MHz M: 300Mhz V: 1.163V A: 85% P: 0%
[2012-02-01 00:21:44] [thread 0: 17408000 hashes, 17319963 khash/sec]
[2012-02-01 00:21:44] [thread 1: 16424960 hashes, 16402865 khash/sec]
[2012-02-01 00:21:45] [thread 0: 14630912 hashes, 14566847 khash/sec]
[2012-02-01 00:21:45] [thread 1: 14319616 hashes, 14259995 khash/sec]
[2012-02-01 00:21:46] [thread 0: 22978560 hashes, 22879879 khash/sec]
[2012-02-01 00:21:46] [thread 1: 23363584 hashes, 23246630 khash/sec]
[2012-02-01 00:21:47] 63.5 C F: 69%(2976RPM) E: 975MHz M: 300Mhz V: 1.163V A: 85% P: 0%
[2012-02-01 00:21:47] [thread 0: 27369472 hashes, 27291555 khash/sec]
[2012-02-01 00:21:47] [thread 1: 33226752 hashes, 33122284 khash/sec]
[2012-02-01 00:21:48] [thread 0: 57163776 hashes, 56931722 khash/sec]
[2012-02-01 00:21:48] [thread 1: 57737216 hashes, 57524490 khash/sec]
[2012-02-01 00:21:49] [thread 0: 42731520 hashes, 42481727 khash/sec]
[2012-02-01 00:21:49] [thread 1: 44275712 hashes, 44202733 khash/sec]
[2012-02-01 00:21:50] 64.0 C F: 69%(2971RPM) E: 975MHz M: 300Mhz V: 1.163V A: 91% P: 0%
[2012-02-01 00:21:50] [thread 0: 16130048 hashes, 16056541 khash/sec]
[2012-02-01 00:21:50] [thread 1: 15966208 hashes, 15950720 khash/sec]
and -n from 2.2.1 (something was wrong with my terminal last time evidently) [2012-02-01 00:23:22] CL Platform vendor: Advanced Micro Devices, Inc.
[2012-02-01 00:23:22] CL Platform name: AMD Accelerated Parallel Processing
[2012-02-01 00:23:22] CL Platform version: OpenCL 1.1 AMD-APP-SDK-v2.4 (595.10)
[2012-02-01 00:23:22] GPU 0 ATI Radeon HD 5800 Series hardware monitoring enabled
[2012-02-01 00:23:22] Setting GPU 0 engine clock to 975
[2012-02-01 00:23:22] Setting GPU 0 memory clock to 300
[2012-02-01 00:23:22] 1 GPU devices detected
|
|
|
|
Sorry, I meant is it the same *.bin file you are running with each one.
When you start cgminer the first time it creates the *.bin file.
Every time after that it will use the *.bin file it created the first time (unless you delete it)
The fastest *.bin should perform at the same speed no matter which version of cgminer you are using (unless there is a problem with the cgminer version you are using)
Lastly:
cgminer -n
cgminer -V
will report info - what do they say?
I tried the binary created by each, on each one. It seems like 2.1.1 or 2.1.2 create "the fastet binary". But the difference is minimal. Output from 2.1.2: -n 1 GPU devices detected
Output from 2.1.1 -n 1 GPU devices detected
Output from 2.2.1 -n 1 GPU devices detected
About the other option, did you want -V or --verbose ? i guess -V gives the version that was used for making the binary, because now im using the one from 2.1.2, and every cgminer reports 2.1.2 with -V (when i actually run them, i get the correct version printed onscreen). I find it weird on linux that the binary is created where i phisically have whatever i use to run cgminer. i have my scripts in /home/user/bitcoin, with my symlinks on my desktop, and the binary is made on my desktop. (this is not the case for windows) EDIT: just to clarify, i originally had 2.0.7, and i noticed the difference on mhash when i updated to 2.2.1, it wasnt until later that i compiled th other 2 versions |
|
|
|
usual ... is it the same binary?
What does cgminer -n report for each ...
Edit: and cgminer -V
and are they pre-built or did you compile them?
i had to compile them, because i made the mistake of installing an x86 debian on my home server (before reinstalling it, i was able to use your binaries). On windows i use your binaries, of course. Also, on windows, the difference is less noticeable, but its there too. I mine only with 5830 (i recently got a new rig with 2 5850, with ubuntu, but i havent touched it yet, the previous owner had phoenix running, and its still running. ps: how can i run cgminer when the user logs in, automatically ? i tried putting the script i use, but nothing happens (it does work if i double click it, i have it in /home/user/bitcoin, with a symlink on the desktop, which is what i use) |
|
|
|
|
i finally got the time to compile 2.1.1, 2.1.2 and 2.2.1 on my debian machine (sdk 2.4).
Just like in windows, 2.2.1 is slower than 2.0.7, 2.1.1 and 2.1.2.
My hd5830 running at 975/300 produces 300 to 315 MHASH with the older versions, but with 2.2.1, it produces 280 to 290 MHASH.
|
|
|
|
i see. well, i failed to make it work. My compilation of cgminer (whatever version) was failing because, somehow, my symlink to the SDK was broken. I compiled 2.1.1, 2.1.2 and 2.2.1. Still, anubis works, and this (which i like more) does not Ill continue withi this sometime in the future. |
|
|
|
what puzzles me is: Array ( ) 1 that at the end. If im not mistaken, your code uses the same "stuff" to get this info "anubis" uses, right ? can't think why it wont work. ps: i'll go back to struggle with compiling cgminer on debian x86, i cant remember, for the life of me, how i did it the first time, now it always tells me no openCL found (even if i point it to where the sdk is). |
|
|
|
it wasnt the firewall (when i first ran it with the api enabled it autoamically asked for firewall permission) after disabling it, nothing changed (and anubis worked fine with it activated). Any chance i did something wrong with your .php ? (or that the one from the first post is not working ) |
|
|
|
will have a look at that (i do have .bat and .sh scripts, so i double click them, or schedule them to run, its not like i do it by hand ) i downloaded what you linked on your first post. I also tried "anubis", and it worked, but i preffer your simpler approach, with no db involved, but i can't get it to run |
|
|
|
make sure your cgminer is set to accept rpc calls from the network:
the following should be part of your conf file for cgminer:
"api-listen" : true,
"api-network" : true,
"api-port" : "4028",
for some reason i was never able to save my config, so i ended up always running it with all the commands from commandline, but i do have: --api-listen --api-network port is optional, if i dont want to change it, right ? ps: what is the older cgminer that has the api functions ? (i have the latest one on "Z", but the other pcs might have older ones, and "omega" has 2.0.7, which i believe does not support API functions). ps2: will try disabling my win7 firewall on "Z" now is the : at the end, ok ? EDIT: didnt work |
|
|
|
|
