Bitcoin Forum
April 26, 2024, 05:46:17 AM *
News: Latest Bitcoin Core release: 27.0 [Torrent]
 
  Home Help Search Login Register More  
  Show Posts
Pages: [1]
1  Local / Разное / Re: Стресс на работе - опасней курения! on: June 28, 2018, 07:03:49 PM
"12:46, 07 сентября 2015 Стресс на рабочем месте опасней пассивного курения

Стрессовая работа вредит здоровью больше, чем пассивное курение

Исследователи выяснили, что по степени вреда для здоровья стресс на рабочем месте не отличается от пассивного курения.

Ученые из Гарвардской бизнес-школы и Стэнфордского университета провели мета-анализ 228 исследований и выяснили, что стресс на рабочем месте увеличивает вероятность развития болезней, подтвержденных врачами, на 35%. Долгие часы за рабочим столом повышают опасность преждевременной смерти почти на 20%.

Самым большим стрессовым фактором являются мысли о возможности лишиться работы, которые увеличивают риск ухудшения здоровья почти на 50%. Все эти показатели выше, чем вероятный риск для здоровья от пассивного курения, как подчеркивают авторы исследования.

Они надеются, что полученные ими результаты заставят руководство компаний умерить требования к своим сотрудникам. Представление некоторых начальников о том, что чрезмерно высокая требовательность или более продолжительные рабочие часы увеличивают продуктивность, не соответствует истине, как показывают многочисленные наблюдения. Стресс повышает вероятность совершения ошибок и снижает производительность труда.

Другие подробности об исследованиях ученых вы можете прочесть в разделе Наука."

Источник: http://sobesednik.ru/zdorove/20150907-stress-na-rabochem-meste-opasney-passivnogo-kureniya


"Ученые приравняли стресс на работе к пассивному курению
08 сентября 2015 г.      17:36 Автор: Даяна Фрост

Людей, которые часто испытывают стресс на рабочем месте можно сравнять с пассивными курильщиками.

Ученые из одного университетов Гарварда провели исследование, в котором они изучили воздействие стресса на рабочем месте на здоровье человека. В результате, ученые сделали вывод, что когда человек пребывает длительное время в стрессовой ситуации, то он больше всех подвержен риску появления у него многих опасных болезней, не исключение тому и ранняя смерть.

Во время проведения эксперимента, ученые учитывали следующее: есть ли у человека работа, если есть, то какой график работы, является ли работа посменной, а также учитывалось то, как работа влияет на личную жизнь. Внимание обращалось и на наличие социальной поддержки, на контроль уровня рабочего процесса самим сотрудником, а также и на то, какие предъявляли требования работнику.

Ученые смогли выяснить, что отсутствие у человека работы и возможности контролировать свой рабочий процесс, а также отсутствие медицинской страховки являются самыми главными причинами ранней смерти.

Оказалось, что слишком длительная работа, которая мешает личной жизни, увеличивает риск преждевременной смерти на двадцать процентов. При этом, отсутствие работы или посменная работа тоже оказывали негативное воздействие на человека."

Источник: http://ftimes.ru/science-it/10808-uchenye-priravnyali-stress-na-rabote-k-passivnomu-kureniyu.html
та мне кажется, что это преувеличили
2  Local / Разное / Re: Чем вы еще увлекаетесь on: June 28, 2018, 07:02:31 PM
Привет, друзья. Здесь общаются новички, а поэтому многим интересно знать, кто чем еще увлекается, кроме крипты? Может кто-то еще найдет человека, увлекающегося тем же. Я, вот например, увлекаюсь хоккеем (NHL) и слушаю рок и метал. А чем увлекаетесь вы?
шахматами
3  Local / Разное / Re: Можно ли развить интуицию? on: June 28, 2018, 06:19:20 PM
Многие вещи в нашей жизни происходят как-то логически. Иногда мы интуитивно чувствуем какие-то события, но увы не всегда. Да и не у всех развита интуиция. Очень хотелось бы ее развить, вот думаю если следовать советам в этой статье http://www.sibirskiyshamanizm.com/razvi ... vselennoj/ действительно ли можно будет ее развить, чтобы по жизни в дальнейшем принимать правильные решения.

в любом случае можно, но это нужно прислушиваться!
4  Alternate cryptocurrencies / Mining (Altcoins) / Re: [ANN] cudaMiner - a new litecoin mining application [Windows/Linux] on: February 11, 2014, 09:23:46 PM
MAX Pool mining on 1GH suddenly freezes after 10-20 yays!... GPU still under hevay load but nothing happens, no reports or anything, just simple cmd screen without new shares or errors?!
Restarted, done everything again and again... same results!
Anyone got any idea (or it's a pool-side error)?


EDIT: Mining resumes after next block is detected (like 30-50sec later)... and it goes like that pause-go-pause-go at random points...WTF?!
EDIT2: Last pause was almost 3min long!
5  Alternate cryptocurrencies / Mining (Altcoins) / Re: [ANN] cudaMiner - a new litecoin mining application [Windows/Linux] on: February 08, 2014, 12:02:23 AM
What's the best pool to mine at right now? I'm throwing 700 some mh/s at 1GH and it's going fine but I'm getting about 25% rejects. Are other smaller pools more reliable in rejects but still large enough to pay out a regular payout?

Mining on 1GH with 95% success rate right now, your config is overdosed somewhere, that's the main reason of your 25% boooos...
6  Alternate cryptocurrencies / Mining (Altcoins) / Re: [ANN] cudaMiner - a new litecoin mining application [Windows/Linux] on: February 07, 2014, 11:24:22 PM
MAX diff @ 5K.... this is going to be one tough battle Smiley
7  Alternate cryptocurrencies / Mining (Altcoins) / Re: [ANN] cudaMiner - a new litecoin mining application [Windows/Linux] on: February 07, 2014, 10:23:06 PM
Dumb Q (or maybe not so dumb?):
Can I "withdraw" BTCs from mcxnow directly to btc-e, or I must really withdraw it in my BTC wallet, and then resend (deposit) it to btc-e?

(BTW... MAX@ 83MH/s on GTX570)
8  Alternate cryptocurrencies / Mining (Altcoins) / Re: [ANN] cudaMiner - a new litecoin mining application [Windows/Linux] on: December 18, 2013, 06:09:16 PM
GTX 570 phantom - same as previous two versions... as expected!

EDIT: BUT...  temps with x86 are ~2C lower (same settings and kH/s results)! .... so this is THE FIRST win for x86 @ my place Smiley
9  Alternate cryptocurrencies / Mining (Altcoins) / Re: [ANN] cudaMiner - a new litecoin mining application [Windows/Linux] on: December 12, 2013, 08:01:18 PM
Power settings are all ok (off or at max where it should be). Hardware acceleration that triggers in chrome is MAYBE the case, but how can I set windows to trigger GPU's full potential in console (DOS) window?
Other question is already posted: why it is still running fine even AFTER I close Chrome (after Cudaminer start)? That trigger then remains in "ON" state or what?...
My other rig with GTX 760 never does that (same nVidia driver, same Windows settings)?!
10  Alternate cryptocurrencies / Mining (Altcoins) / Re: [ANN] cudaMiner - a new litecoin mining application [Windows/Linux] on: December 12, 2013, 12:43:34 PM
@cbuchner1

2GB config made for testing purposes only, so no harm done, 4GB were mining again 15 mins later Wink
Not going to change anything - both rigs are mostly used for work/gaming... so mining is done on "idle hours only" Smiley
Tnx anyway
Any idea about "browser + cudaminer = high KH/s" situation from my previous post?! Sounds stupid but happens all the time on the first rig only!
11  Alternate cryptocurrencies / Mining (Altcoins) / Re: [ANN] cudaMiner - a new litecoin mining application [Windows/Linux] on: December 12, 2013, 12:31:24 AM
...And now something about weird things on my GTX 570 and GTX 760 rigs:

GTX 570
- Most people claim that system RAM has little or no difference in hashrates, but I have suffered serious problems when i left just 2GB on mobo. These problems started immediately after cudaminer start, because the good-old config (posted in previous post) was NOT WORKING at all! F15x16 could be executed just to start the mining, but with "wrong detection" of over 600KH/s and errors on every single share ("not validated on CPU"). Auto config was giving different setups every time, rates dropped to ~200KH/s, and what is most interesting, auto config was reporting MAX WARPS: 171 (instead of 264 reported with 4GB of RAM)?! My rig was going too WILD and unpredictable for the stuff that is "not so much RAM dependent"!
- My max of ~255 KH/s can be achieved ONLY if browser (chrome in my case) is active BEFORE starting cudaminer.exe, and some page is opened (usually my pool page). After starting cudaminer, I can close everything and hashrate stays the same. Otherwise, same settings without browser give me only ~235 KH/s?!
- Some people were using Kepler kernels on Fermi devices (in previous versions of cudaminer), but at my place it was making a serious drop in KH/s
- Just to note... interactive mode (-i 1) is taking away 7-8KH/s on this rig

GTX 760
- As I mentioned before, auto never reaches the best manual config for me (and there is a better config than my current one for sure), and the auto option is changing config very often (I had like 3 different configs on 5 cudaminer restarts)?!
- This GPU (or whatever) is varying MUCH more in hashrates (160-177KH/s up-down most of the time), than GTX 570 which has pretty much "fixed" rates 252-255KH/s!

BOTH
- Is it possible that I NEVER get better hashrates on any config with 32bit vs 64bit? So many people (developer too) usually has better results with 32bit version, but I never even saw that for a second?! (not complaining, just asking...)
12  Alternate cryptocurrencies / Mining (Altcoins) / Re: [ANN] cudaMiner - a new litecoin mining application [Windows/Linux] on: December 11, 2013, 11:56:27 PM
Hi @ll
My first post here... will try to help as much as I can (and ask as little as I must) Wink
First of all, thanks Buchner for making this possible!
I have two "average" working rigs mining at the moment, so I'm going to share my xp hoping to help all users and developer.

Gainward GTX 570 1280MB phantom @ stock (running on intel E8400, 4GB/1066, Asus formula rampage, all @ stock)
Gigabyte GTX 760 2GB OC @ stock (irrelevant in this case, but i7, 16GB, Z87... too good to make any "noise" anyway)

Anyway... after 4-5 days in testing, I have got the best results with Cudaminer 2013-12-01, 64bit in both cases (2013-12-10 not tested on GTX 570).
Both rigs running on Win7 Pro X64 SP1 with various (different for sure) official updates...

GTX 570 config (max 255KH/s):
cudaminer.exe -i 0 -H 1 -l F15x16 -C 1 -o stratum+tcp://...
All other auto or manual configs work with lower rates, but never below 200KH/s (I'm talking about "correct settings" for this card, not random Fxxxx)

GTX 760 config (max 177KH/s):
cudaminer.exe -i 0 -H 1 -l K96x2 -C 1 -o stratum+tcp://...
this is MANUAL config, because auto NEVER gives me this setup! All other configs are lower, but not lower than 150KH/s.

My next post will be about some odd things on both rigs, which hopefully can be eliminated or "refined" in further development...

Anyone with better configs/setups are welcome... we all love to try something better!

P.S. All of this is obviously very different on every system, so EVERY SINGLE component in our rigs can make a serious change in hashrates.
13  Other / Beginners & Help / Re: "Newbie" Cant get CUDAMINER to work on: December 11, 2013, 07:58:42 PM
First of all, you have to read the README.txt file in your cudaminer folder, and you will find all the info you need for setting up commands and switches.
You can make a shortcut on your desktop pointing to your cudaminer.exe file, and then edit shortcut's "target" line with something like (after cudaminer.exe):
-i 0 -H 1 -C 1 -o stratum+tcp://"YOUR.POOL.SERVER.ADDRESS":"PORT" -O username.worker:password
Only if you input correct data, your cudaminer will start working as it should...

Of course, try to do a "clean install" of nVidia driver before you do anything else...

Thank you for the reply

But even when I fallow the read me and enter it as

cudaminer.exe -H 2 -d 0,1,2 -i 1,0,0 -l auto,F27x3,K28x4 -C 0,2,1
-o stratum+tcp://world.wemineltc.com:3334 -O rbh5081.1:x

I still get the error above

Try as i said, now in full... (just copy/paste this)
cudaminer.exe -i 0 -H 1 -C 1 -o stratum+tcp://world.wemineltc.com:3334 -O rbh5081.1:x
If you make one card work, then just add ,0,0 or ,1,2 as you did...
One more thing... it's VERY important that all "switch" letters ARE case sensitive and that you use SPACES just as it's said.
14  Other / Beginners & Help / Re: "Newbie" Cant get CUDAMINER to work on: December 11, 2013, 07:24:58 PM
First of all, you have to read the README.txt file in your cudaminer folder, and you will find all the info you need for setting up commands and switches.
You can make a shortcut on your desktop pointing to your cudaminer.exe file, and then edit shortcut's "target" line with something like (after cudaminer.exe):
-i 0 -H 1 -C 1 -o stratum+tcp://"YOUR.POOL.SERVER.ADDRESS":"PORT" -O username.worker:password
Only if you input correct data, your cudaminer will start working as it should...

Of course, try to do a "clean install" of nVidia driver before you do anything else...
Pages: [1]
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!