Show Posts
|
Pages: [1] 2 »
|
Comrades, Please help. TRM 0.7.9 - often DEAD card. Is it Mem or it is GPU? RX588
|
|
|
You should use AMD Memory Tweak ( https://github.com/Eliovp/amdmemorytweak binaries are here compiled by me for those who don't know how to compile the source: https://drive.google.com/open?id=1sgYugFgFq5Ja89DexDvwgvP1dtRO2d7A) and you will 100% sure get 1.0%-1.5% more hashrate than Claymore. Unzip WinAMDTweak.zip to some folder XXX. Run Claymore with your best settings. After that run a command prompt window with Administrative privileges, navigate to WinAMDTweak.zip unzipped folder XXX using 'cd XXX' command and after that run: WinAMDTweak.exe --current You will see the current memory setting of Claymore. Something like this: https://www.cryptoprofi.info/wp-content/uploads/2019/04/word-image-49.pngCopy/Paste them down in text file. After that stop Claymore. Run WinAMDTweak.exe --... with these settings and run Phoenixminer.exe after that with the same -cclock -mclock -cvddc -mvddc parameters like Claymore. For Nvidia use PM 5.1 with -straps option. Thanks, Man
|
|
|
Doc, could you join config, bat params and pools in one config file? not convenient when there are a lot of parameters in different files.
|
|
|
Shouldn't we revive this thread now that people can finetune the old GDDR5 public timings with amd mem tweak? Can we? Micron MT51J256M32: 777000000000000022AA1C00CE615C4190551014B68C450A0060040074081420EA8900AB0200000 01712262BA42C3714 ETH 33.6mh/s Straps and speeds, without used core and memory clocks feel incomplete Also, everyone can make a strap for Ethash. Try for CN. Micron MT51J256M32:777000000000000022AA1C00CE615C4180551013B68C450A0060040074081420EA8900AB0200000 01712262BA42C3714 XMR 1100H/S core 1300/MEM 2260 if there are specialists, let's jointly improve the result. Thanks, man. You are best. Can you share xmr timings for H5GQ8H24MJ (HYNIX_2), H5GC4H24AJ (HYNIX_1), K4G80325FB (SAMSUNG) yet?
|
|
|
Hi, guys! Who can explain what means compute_errors in SRB json reports? One of my gpus (rx580_hynix8, Win10, 18.6.1) have a one error every 1 min. I reduced an overclocking and intensity, but the errors in srbminer still comes. HWINFO no have memory errors. Maybe somebody knows?
|
|
|
Anybody seen the following error on Win 64 GUI startup from latest release?
EntryPointNotFoundException
Unable to find an anetry point named 'ADL2_OverdriveN_ZeroRPMFan_Get' in DLL 'ataidlxx.dll' at WinFormsGUI.ADL.ADL2_OverdriveN_ZeroRPMFan_Get(.......
--ET
your driver is old. use new driver
|
|
|
Seems to be working on 18.5.1 too if anyone is interested!
very interesting. if you can please share your results. rx580 gddr5 interesting. All internet timings is cool of course. but when timings I can tweak myself - that is cool. Please share your playing to start for noobies.. Thanks for early.
|
|
|
Can anyone share with me kernel files compiled on 18.6.1 Windows 10 driver for cnr RX 580 8Gb card? Kernel files is on "cache" folder inside miner folder.
Enjoy https://yadi.sk/d/AJvgBJ6Aa0r1pwThanks! I'll try it! Can you make the same with fragments 1 and 4? +f1 Sorry, f4 exists. Need f1 and f2. +f2
|
|
|
Can anyone share with me kernel files compiled on 18.6.1 Windows 10 driver for cnr RX 580 8Gb card? Kernel files is on "cache" folder inside miner folder.
Enjoy https://yadi.sk/d/AJvgBJ6Aa0r1pwThanks! I'll try it! Can you make the same with fragments 1 and 4? +f1
|
|
|
Can anyone share with me kernel files compiled on 18.6.1 Windows 10 driver for cnr RX 580 8Gb card? Kernel files is on "cache" folder inside miner folder.
Enjoy https://yadi.sk/d/AJvgBJ6Aa0r1pw
|
|
|
teamredminer v0.3.6 Beta ReleaseThis is an optimized miner for AMD GPUs created by todxx and kerney666. Features In Development: - New Algorithms
- Temp and Fan Monitoring
- Pool Failover
- Colors
NIce job, guys! Waiting for the cn-heavy class and watchdog mechanism also.
|
|
|
+ Added. Good Idea. Also adding Algo Column and miner version.
|
|
|
Agree, do not use this miner if you don't like the fee ...use others or make your own miner.
OR you dont read my post if you angry where i ask why fee....... or all stop ask why miner dont work with....(i dont read this- go use other miner) or all stop ask why miner have bug in watchdog and GPU core clock....(i dont read this- go use other miner) or all stop ask why miner not use forked coin...(i dont read this- go use other miner) or stop post like :miner work better with driver 18. ((i dont read this- go use other miner I want a smaller HR:) ) mybe is best CLOSE this topic?? and nobody will ever ask anything and all happy?I do not think that's good. And you? So you are the smart guy who found that fee is not 0.85% but 20%? Author must close topic immediately! We all are in big waiting for Your Gorgeous Miner with 0.86% fee (real) and few little minor bugs! livada is absolutely right. The miner is not stability, Claymore one time start - and no need any action to rise up hashrate, there is no compare this miners. This miner is need to restart 100500 times to rise up hashrate. So this scheme of dev fee not fair for miners. I like SRB, but I have to use another one. Good luck to dev to make the fastest and most stable miner. Just remember that the miner needs stability, hashrate and profit
|
|
|
You need to start miner with intensity 60, let it work for a few minutes , then start it with intensity 56. This should get you over 1500+ easily. Some call this foreplay. And of course use v1.6.4
Is it working on Vega only? I have 584, 588. what intesity you are recommend? algo - heavy/bittubev2
|
|
|
DAMN saw the post of new version..downloaded from first page = version 1.6.3 = to fast action from me not it works...THX You probably downloaded in those few minutes between when i uploaded it and updated the post here What is Latency in json? Is it ping?
|
|
|
V1.6.4 - Added possibility/support to set GPU'S with cmd parameters directly in start.bat - Added parameter --sendallstales , which enables sending of every stale share - Minor bug fixes
+ So command line setup of GPU'S is finally here. Here are the parameters that can be used:
--ccryptonighttype value (algo to use) --cgpuid value (gpu id, comma separated values, use --listdevices to see available) --cgpuintensity value (gpu intensity, comma separated values) --cgputhreads value (number of gpu threads, comma separated values) --cgpuworksize value (gpu worksize, comma separated values) --cgputargettemperature value (gpu temperature, comma separated values) --cgputargetfanspeed value (gpu fan speed in RPM, comma separated values) --cgpuadltype value (gpu adl to use (1 or 2), comma separated values) --cgpukernel value (gpu kernel to use (1 or 2), comma separated values)
Parameters : --cgpuid, --cgpuintensity and --cgputhreads MUST BE USED, the others are optional If you want to set everything in cmd line, you still need to have an empty config.txt file (which contains just : {}, or any other parameter like api etc etc )
Ex. for GPU and POOL setup from CMD:
Use 1 GPU with id 0 , intensity 120, 2 threads on algo cryptonight v7 on nanopool: SRBMiner-CN.exe --ccryptonighttype normalv7 --cgpuid 0 --cgpuintensity 120 --cgputhreads 2 --cpool xmr-eu1.nanopool.org:14444 --cwallet 4A5hJyu2FvuM2azexYssHW2odrNCNWVqLLmzCowrA57xGJLNufXfzVgcMpAy3YWpzZSAPALhVH4Ed7x o6RZYyw2bUtbm12g.donation
Use 5 GPUS with id 0,1,2,3,4 , intensities 56,56,55,58,55, 2 threads for each GPU, on algo cryptonight v7 on nanopool: SRBMiner-CN.exe --ccryptonighttype normalv7 --cgpuid 0,1,2,3,4 --cgpuintensity 56,56,55,58,55 --cgputhreads 2,2,2,2,2 --cpool xmr-eu1.nanopool.org:14444 --cwallet 4A5hJyu2FvuM2azexYssHW2odrNCNWVqLLmzCowrA57xGJLNufXfzVgcMpAy3YWpzZSAPALhVH4Ed7x o6RZYyw2bUtbm12g.donation
+ --sendallstales is now a default parameter in start.bat When a new job arrives to the miner, and a result from a previous job is sent to the pool, this is called a stale share. A low percent of pools accepts stale shares, they generally reject the share with an 'Invalid job id' error. Now in SRB i made this logic : if a new job arrives, a share for a previous job is not sent IF it's not sent in a period less than a second since the new job arrived. It looks like some pools accept stale shares even for a few seconds after a new job was dispatched. This parameter turns off the 1 second rule, and sends every stale share there is. This could potentially lead to an increase in effective share rate, but also you can get a lot more rejected shares, it all depends on the pool you are using.
Oh yeah, you can also get shares rejected when a pool switch/reconnect/job timeout happens, in situations where the pool difficulty is low and you produce a lot of shares, but in the process of doing the calculations (which can take 1-2 sec depending on your hardware) the connection to the pool drops, these share are tried to be sent while you are not logged on the pool, so you will get now a nice warning that a network error has occured and your shares wont be sent.
Dok, please, spent some your time for : 1 Add to stat info, by pressing "s", info about i/w/t too. 2 If it possible in hashrate info add the voltage 3 Can you rec the json info to file from miner. Browser cannot rec to disk any data. Very need.
|
|
|
V1.6.4 - Added possibility/support to set GPU'S with cmd parameters directly in start.bat - Added parameter --sendallstales , which enables sending of every stale share - Minor bug fixes
+ So command line setup of GPU'S is finally here. Here are the parameters that can be used:
--ccryptonighttype value (algo to use) --cgpuid value (gpu id, comma separated values, use --listdevices to see available) --cgpuintensity value (gpu intensity, comma separated values) --cgputhreads value (number of gpu threads, comma separated values) --cgpuworksize value (gpu worksize, comma separated values) --cgputargettemperature value (gpu temperature, comma separated values) --cgputargetfanspeed value (gpu fan speed in RPM, comma separated values) --cgpuadltype value (gpu adl to use (1 or 2), comma separated values) --cgpukernel value (gpu kernel to use (1 or 2), comma separated values)
Parameters : --cgpuid, --cgpuintensity and --cgputhreads MUST BE USED, the others are optional If you want to set everything in cmd line, you still need to have an empty config.txt file (which contains just : {}, or any other parameter like api etc etc )
Ex. for GPU and POOL setup from CMD:
Use 1 GPU with id 0 , intensity 120, 2 threads on algo cryptonight v7 on nanopool: SRBMiner-CN.exe --ccryptonighttype normalv7 --cgpuid 0 --cgpuintensity 120 --cgputhreads 2 --cpool xmr-eu1.nanopool.org:14444 --cwallet 4A5hJyu2FvuM2azexYssHW2odrNCNWVqLLmzCowrA57xGJLNufXfzVgcMpAy3YWpzZSAPALhVH4Ed7x o6RZYyw2bUtbm12g.donation
Use 5 GPUS with id 0,1,2,3,4 , intensities 56,56,55,58,55, 2 threads for each GPU, on algo cryptonight v7 on nanopool: SRBMiner-CN.exe --ccryptonighttype normalv7 --cgpuid 0,1,2,3,4 --cgpuintensity 56,56,55,58,55 --cgputhreads 2,2,2,2,2 --cpool xmr-eu1.nanopool.org:14444 --cwallet 4A5hJyu2FvuM2azexYssHW2odrNCNWVqLLmzCowrA57xGJLNufXfzVgcMpAy3YWpzZSAPALhVH4Ed7x o6RZYyw2bUtbm12g.donation
+ --sendallstales is now a default parameter in start.bat When a new job arrives to the miner, and a result from a previous job is sent to the pool, this is called a stale share. A low percent of pools accepts stale shares, they generally reject the share with an 'Invalid job id' error. Now in SRB i made this logic : if a new job arrives, a share for a previous job is not sent IF it's not sent in a period less than a second since the new job arrived. It looks like some pools accept stale shares even for a few seconds after a new job was dispatched. This parameter turns off the 1 second rule, and sends every stale share there is. This could potentially lead to an increase in effective share rate, but also you can get a lot more rejected shares, it all depends on the pool you are using.
Oh yeah, you can also get shares rejected when a pool switch/reconnect/job timeout happens, in situations where the pool difficulty is low and you produce a lot of shares, but in the process of doing the calculations (which can take 1-2 sec depending on your hardware) the connection to the pool drops, these share are tried to be sent while you are not logged on the pool, so you will get now a nice warning that a network error has occured and your shares wont be sent.
with empty config.txt (only {}) SRBMiner-CN.exe --ccryptonighttype normalv7 --cgpuid 0 --cgpuintensity 120 --cgputhreads 2 --cpool xmr-eu1.nanopool.org:14444 --cwallet xxxxxxxxxxxxxx = invalid config file. Missing Value is "cryptonighttype" after putting the cryptotype in the config -> missing Value is "Intensity" Try this, maybe "" missed. SRBMiner-CN.exe --ccryptonighttype "normalv7"
|
|
|
Hi, @doktor83
How about recording json data to a file, it will be good to analyze the temperature, fan and hasrates in a time scale? By excel, for example. Thank you for thinking about this.
|
|
|
Hi, @doktor83
Some test reporting here: Algo: normalV7. If watchdog gpu hashing speed 0 and hash_monitor restarts the miner process, then miner is hang.
{"blob":"0909c8e691d9054187d2b3381a410b39bb636b035107ccf2290ca5ebfaa9b4ed8e10e1e4b757c50 00000008555f6529c4663d2c893d84426cb67212314d941fe54da [2018-06-16 08:16:08] watchdog: GPU0 [BUS: 1] hashing speed is 0 H/S [2018-06-16 08:16:45] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"0909f2e691d9052fb3d13d61de1297a42c0a24f32c6a68d26964f71935dcc9953d0865d73d3dd90 000000033cdb89f8b6a422e42480e4b2eabd6060b8e0833e551c5 [2018-06-16 08:16:54] watchdog: GPU0 [BUS: 1] hashing speed is 0 H/S [2018-06-16 08:16:54] watchdog: GPU1 [BUS: 2] hashing speed is 0 H/S [2018-06-16 08:16:54] watchdog: GPU2 [BUS: 7] hashing speed is 0 H/S [2018-06-16 08:16:54] watchdog: GPU3 [BUS: 9] hashing speed is 0 H/S [2018-06-16 08:16:54] watchdog: GPU4 [BUS: 10] hashing speed is 0 H/S [2018-06-16 08:17:11] hash_monitor: Average 5min hashing speed (5049 H/S) is lower than the defined minimum (5050 H/S) speed! [2018-06-16 08:17:11] Restarting miner process
[2018-06-16 08:17:14] Miner version: 1.6.0 Z-z-z..
It was hanging while Im not restarted the rig, in hour.
|
|
|
Hi, guys! Algo - normalV7. Who played with I/W/T on RX584, RX588? Can you share, please.
|
|
|
|