SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[UnclWish]

Can anyone share with me kernel files compiled on 18.6.1 Windows 10 driver for cnr RX 580 8Gb card?
Kernel files is on "cache" folder inside miner folder.

[1715198820]

1715198820

[1715198820]

1715198820

[1715198820]

1715198820

[abg00]

hi Dok

test old card with xcash 1.8.1
r7(9) 2gb card

i=0=18 rate 192
i=27 rate 234

plz correst auto intens

[Art Gar]

Can anyone share with me kernel files compiled on 18.6.1 Windows 10 driver for cnr RX 580 8Gb card?
Kernel files is on "cache" folder inside miner folder.

Enjoy
https://yadi.sk/d/AJvgBJ6Aa0r1pw

[UnclWish]

Can anyone share with me kernel files compiled on 18.6.1 Windows 10 driver for cnr RX 580 8Gb card?
Kernel files is on "cache" folder inside miner folder.

Enjoy
https://yadi.sk/d/AJvgBJ6Aa0r1pw

Thanks! I'll try it! Can you make the same with fragments 1 and 2?

[Art Gar]

Can anyone share with me kernel files compiled on 18.6.1 Windows 10 driver for cnr RX 580 8Gb card?
Kernel files is on "cache" folder inside miner folder.

Enjoy
https://yadi.sk/d/AJvgBJ6Aa0r1pw

Thanks! I'll try it! Can you make the same with fragments 1 and 4?

+f1

[clancy182]

hi,

i still have crash after 24 hours of using with 1.8.1
its better than 1.8.0 (crash after 4-6 hours)
no crash before.

GPU0: Radeon RX Vega [gfx900] [8176 MB][I: 112.0][W: 16][T: 2][F: 4][BUS: 9]
GPU1: Radeon RX Vega [gfx900] [8176 MB][I: 112.0][W: 16][T: 2][F: 4][BUS: 12]
GPU2: Radeon RX Vega [gfx900] [8176 MB][I: 112.0][W: 16][T: 2][F: 4][BUS: 6]
GPU3: Radeon RX Vega [gfx900] [8176 MB][I: 112.0][W: 16][T: 2][F: 4][BUS: 3]
-----------------------------------------------------------------------------
SRBMiner Cryptonight AMD GPU miner 1.8.1
DevFee ~0.85%
Press 's' to display stats
Press 'h' to display hashrate
Press 'r' to reload pools
Press 'p' to switch to the next pool
Press 'o' to switch to the previous pool
Press 0-9 to disable/enable GPU while mining
-----------------------------------------------------------------------------
Algorithm               : Cryptonight V4 (R)
Algo switching          : disabled
Startup monitor         : enabled
Gpu watchdog            : enabled [normal mode]
Coin forking            : disabled

[RuMiner]

confirm. having crashes every 6-9 hours on CNv4

[UnclWish]

Can anyone share with me kernel files compiled on 18.6.1 Windows 10 driver for cnr RX 580 8Gb card?
Kernel files is on "cache" folder inside miner folder.

Enjoy
https://yadi.sk/d/AJvgBJ6Aa0r1pw

Thanks! I'll try it! Can you make the same with fragments 1 and 4?

+f1

Sorry, f4 exists. Need f1 and f2.

[Art Gar]

Can anyone share with me kernel files compiled on 18.6.1 Windows 10 driver for cnr RX 580 8Gb card?
Kernel files is on "cache" folder inside miner folder.

Enjoy
https://yadi.sk/d/AJvgBJ6Aa0r1pw

Thanks! I'll try it! Can you make the same with fragments 1 and 4?

+f1

Sorry, f4 exists. Need f1 and f2.

+f2

[nars28]

I'm having crashes with 1.8.1 too on V4. Last time it was bulletproof on V8.

[chimaeraa]

hi doc.
 do you know  i love you ?!!!!  

[2019-03-20 11:30:00] Startup monitor attached
[2019-03-20 11:30:00] Miner version: 1.8.1
[2019-03-20 11:30:00] Windows version: 10.0 build 17763
[2019-03-20 11:30:00] Video driver version: 25.20.15027.5007
[2019-03-20 11:30:07] AMD Platform ID: 0
[2019-03-20 11:30:07] AMD platform FOUND

i did install Radeon Adrenalin-19.3.2 and use your last srbminer . it's lock beautiful    it's about 12H and nothing happen but F***  XMR always got crash not impotent .

whit ODNTools 0.2.8 and new driver you don't need anything else . no power tabel no reg edit no ..... just set in ODNTools  and rich best P/H -

( i rich 2300 H/S in Vega 64 Air XMR whit G 1650-v950 and M1300-v950) but i don't push it hard ,maybe it rich 2600 H/S !!!!!!!!!!!!!!!!!??

also you can use amd wattman whit lot of access in every part of your gpu hardware whit lot of api to control it....!!! i think you like it . try it.

thank you lot.

also i have on Q. when i did config my rige i connect and DC from pool . every time in same Block high i get different job to do. i find some job is easy , hard  or endless loop. can you add some option to miner if last  shear time find or AVG  time more than x Sec just get new job from pool???
( i find 3 block in 5 min when config my rige in solo mining)

[SamAlackass]

Hi all, I'm getting a lot of low difficulty rejects with 1.8.1 so I can't properly test. I'm back to 1.8.0 for now but it's crashing often without any indication in the logs.

[chimaeraa]

it's page file

- System

  - Provider

   [ Name]  Application Error
 
  - EventID 1000

   [ Qualifiers]  0
 
   Level 2
 
   Task 100
 
   Keywords 0x80000000000000
 
  - TimeCreated

   [ SystemTime]  2019-03-20T10:06:13.494663500Z
 
   EventRecordID 2069
 
   Channel Application
 
   Computer DESKTOP-3QESJPQ
 
   Security
 

- EventData

   SRBMiner-CN.exe
   1.8.1.0
   00000000
   ntdll.dll
   10.0.17763.348
   ca65c822
   c0000374
   00000000000faf49
   1cbc
   01d4def2eaa5a99b
   C:\Users\mahdi\Desktop\SRBMiner-CN-V1-7-0\SRBMiner-CN-V1-7-0\SRBMiner-CN.exe
   C:\Windows\SYSTEM32\ntdll.dll
   bfbe991a-82da-4d77-aa33-83b28f32d57c

- System

  - Provider

   [ Name]  Application Popup
   [ Guid]  {47bfa2b7-bd54-4fac-b70b-29021084ca8f}
 
   EventID 26
 
   Version 0
 
   Level 4
 
   Task 0
 
   Opcode 0
 
   Keywords 0x8000000000000000
 
  - TimeCreated

   [ SystemTime]  2019-03-20T10:06:13.471720400Z
 
   EventRecordID 2377
 
   Correlation
 
  - Execution

   [ ProcessID]  536
   [ ThreadID]  68
 
   Channel System
 
   Computer DESKTOP-3QESJPQ
 
  - Security

   [ UserID]  S-1-5-18
 

- EventData

  Caption Windows - Virtual Memory Minimum Too Low
  Message Your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. During this process, memory requests for some applications may be denied. For more information, see Help. 

[RuMiner]

it's page file

I don't have same event regarding swap file. also it is set to 70Gb for 8 cards, so it's not the main reason

[doktor83]

it's page file

I don't have same event regarding swap file. also it is set to 70Gb for 8 cards, so it's not the main reason

My guess is that i have a bug somwhere in my net code, so i am fully rewriting it, it's going to take some time, but i hope it will fix these annoying random crashes 

[chimaeraa]

it's page file

I don't have same event regarding swap file. also it is set to 70Gb for 8 cards, so it's not the main reason

can you see your windows  event viewer and see what log save there ?

[Bllacky]

On my 280X video cards I keep getting these warnings with V4:

WARNING: Linking two modules of different data layouts!
WARNING: Linking two modules of different target triples: input.bc: 'amdil64-pc-unknown-amdopencl' and 'amdil-pc-unknown-amdopencl'
WARNING: Linking two modules of different data layouts!
WARNING: Linking two modules of different target triples: input.bc: 'amdil64-pc-unknown-amdopencl' and 'amdil-pc-unknown-amdopencl'
WARNING: Linking two modules of different data layouts!
WARNING: Linking two modules of different target triples: input.bc: 'amdil64-pc-unknown-amdopencl' and 'amdil-pc-unknown-amdopencl'
WARNING: Linking two modules of different data layouts!
WARNING: Linking two modules of different target triples: input.bc: 'amdil64-pc-unknown-amdopencl' and 'amdil-pc-unknown-amdopencl'

Apart from that, it seems to be working.

I will need to figure out the best settings next.

[rotaryfurball]

it's page file

I don't have same event regarding swap file. also it is set to 70Gb for 8 cards, so it's not the main reason

My guess is that i have a bug somwhere in my net code, so i am fully rewriting it, it's going to take some time, but i hope it will fix these annoying random crashes 

Thank you for the things you do! Will be looking forward for 1.8.2

[RuMiner]

can you see your windows  event viewer and see what log save there ?

last crash (and all the previous). source: Application error, event code: 1000, category: (100), and full path to SRBMiner exe file. Nothing else near.
I'm catching error 1000 event via scheduler and run reboot.bat in case of it. Rig reboots and goes well for next 6 or more hours

[doktor83]

can you see your windows  event viewer and see what log save there ?

last crash (and all the previous). source: Application error, event code: 1000, category: (100), and full path to SRBMiner exe file. Nothing else near.
I'm catching error 1000 event via scheduler and run reboot.bat in case of it. Rig reboots and goes well for next 6 or more hours

Are you mining V4 ?
Im curious are the crashes happening only on V4 ?

If so, im probably not releasing some of the CL resources as i should..