|
LOUD miner versions give me only compute errors on all my 470/570 4Gb/8Gb, but works on my VEGA 56, any idea why ?
|
|
|
|
|
When wallet will be back on TradeOgre ? Wallet is in maintenance since few days. I asked them why and they respond me it was disabled on dev demand. So ?
|
|
|
|
Thanks for explanations  |
|
|
|
|
I've hashrate difference between BBR and PURK, is it normal ? My hashrate is better on PURK.
On the same cards, same miner options : 2.3 on PURK, 1.8 on BBR
|
|
|
|
|
My 570 4Gb are better than my 570 8Gb, is it normal ?
Same core but higher memory frequency on 8Gb.
2.3-2.4MHs on 4Gb
1.9-2.1MHs on 8Gb
256x0 on both. Tried 384x0 on 8Gb, very few change on hashrate.
EDIT : well, it seems I have big differences between my differents x70 4Gb, and my first test was on my bests ...
|
|
|
|
So reward has changed from 120 to 60 since 3 days, and pools API always returns 120 ?  |
|
|
|
Not only, trying to create new address for MDEX ...  |
|
|
|
|
Getting 205MHs on Exosis for 12 RX570 8Gb @1200/2100, it's ~17MHs per gpu, is that correct hashrate ?
|
|
|
|
|
It's not clear, there is now 2 chains ?
Fairpool is on a new chain ?
Official pool is on original chain ?
What is the good chain ?
And my address on Tradeogre has changed ...
|
|
|
|
|
SRBMiner has changed api config in last version, you must active it from command line now. May be it's the source of your problems ...
|
|
|
|
Well, just tested v8 and with what i've read in last pages, it seems my v7 settings are too low  For 12 RX 570 8GB @1200/2100/910mV v7 on 1.6.7 : 10320Hs / 1230w v8 on 1.6.8 : 10500Hs / 1425w Will try more testing ... For 12 RX 570 4GB 1150\810-830 2030\830 1.6.8 v7 11400 h\s | 1094 w v8 11100 h\s | 1236 w ok... I need fine tuning ! You made your own memory straps ? |
|
|
|
coin announced in may, yet no exchange today or on coinmarketcap
What a failure coin.
Is on Tradeogre since launch ... |
|
|
|
Well, just tested v8 and with what i've read in last pages, it seems my v7 settings are too low For 12 RX 570 8GB @1200/2100/910mV v7 on 1.6.7 : 10320Hs / 1230w v8 on 1.6.8 : 10500Hs / 1425w Will try more testing ... |
|
|
|
|
Script is not an algo, Scrypt is ...
|
|
|
|
Is that a real exchange ?  |
|
|
|
The AMD miner works ? Testing on a RX rig, it starts, stay open few seconds, and close ... setx GPU_FORCE_64BIT_PTR 1 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_HEAP_SIZE 100 setx GPU_MAX_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_MAX_SINGLE_ALLOC_PERCENT 100 sgminer.exe -k hex -o stratum+tcp://us.bsod.pw:2320 -u xxx -p c=XDNA Tested on 3 pools, same result  |
|
|
|
You can't restart miner 24 times. There is an overhead in getting the kernels loaded to GPU, connecting to pool, getting work and submitting result.
Dok changed the first mining fee session. Unless people are using autoswitch algos/apis this shouldn't be problem (assuming you're not cheating the dev fee).
How about a random dev fee in first session? Is that difficult to implement as well. There are couple of miners that do that.
It's EXACTLY what my tools are doing since more than 2 years ... |
|
|
|
|
We don't have access to miner code, we finally don't know how fee works on each of them. And now I ask me.
|
|
|
|
|
For me, since begining, it was logic that fees was calculated for day period, not for "session" period. But it wasn't case.
I mean, if i launch miner 1 time for 24h or 24 times for 1h, fees have to be the same.
2 of my rigs have started SRBMiner 55 and 59 times in last 24h ...
I'm not telling I don't wan't to pay your fees, I'm telling I want to pay 0.85% a day, not 0.85%/13 each time I launch miner.
Your job is great, your miner is the best on my cards, it makes me money, it's normal you have your fees. But not more than it's annonced.
|
|
|
|
Interesting this words on devfee and restarting miner ...
I'm using also this method : switching my rigs on the best coin many times per hour/day. Not for not to pay fees but for mining coin with best profit at the moment.
So if fees are launched every time miner starts, fees are more than 0.85% ...
I will try to monitor that ...
I did not reinvent the wheel, every closed source miner that has a fee works this way. I don't understand what's all this wondering now, like you did not know how it works. The rules are simple : 0.85% is the fee for 24hr mining. That means 85660 sec mining for user and 740 sec for the devfee. There are 13 devfee minings in 24 hours , so every mining period takes ~55-56 sec. The first devfee of 13 total is in the first 15 minutes. If you kill the miner process and start it again, it will again mine the first fee of 13 total in the first 15 minutes. So when you mined the first devfee its not 0.85% . 0.85% is 13xdevfee's. So no, fee's aren't more than 0.85%. If I relaunch miner every hour, fees are 24 periods, right ? you can relaunch it every 5 minutes, or 1 hour or 25 days, that is not my business how you use it I can't know for how long are you going to use the miner, so i can't predict what will the 0.85% be. That is why there is a 24 hour period. And period. Well, I'm dev too, but not at your level for sure. But ( for exemple ) write in a file when miner starts/stops and fees periods, and check that at miner launch is not so complicated. EDIT1 : I know you listen the community, may be this can be a feature in a future version !? EDIT2 : We don't have information in log when switching on devfee ? |
|
|
|
|
Show Posts
