|
Is there a way to print/show max diff hit by miner (like t-rex)
running this on Linux
2.71 release notes says
+ Display maximum difficulty of shares for each GPU
x[2021-12-07 17:20:24][info][miner/0]: | 2 3090 36 90 % 1155 10702 6 | x
x[2021-12-07 17:20:24][info][miner/0]: | 3 3090 46 90 % 1155 10702 6 | x
x[2021-12-07 17:20:24][info][miner/0]: | 4 3090 42 90 % 1155 10702 6 | x
x[2021-12-07 17:20:24][info][miner/0]: | 5 3090 44 90 % 1155 10702 4 | x
x[2021-12-07 17:20:24][info][miner/0]: | 6 3090 35 90 % 1155 10702 6 | x
x[2021-12-07 17:20:24][info][miner/0]: | 7 3090 45 90 % 1155 10702 6 | x
x[2021-12-07 17:20:24][info][miner/0]: +---+-----+----+-----+----+-----+-----+ x
x[2021-12-07 17:20:24][info][miner/0]: 17:20:23 Pool: solo-eth.2miners.com:6060 [51.195.88.16] x
x[2021-12-07 17:20:24][info][miner/0]: 17:20:23 Pool Hashrate: 937.27 MH/s Efficiency: 95.37 % x
x[2021-12-07 17:20:24][info][miner/0]: 17:20:23 Shares/Minute: 3.22 x
x[2021-12-07 17:20:24][info][miner/0]: 17:20:23 Uptime: 0d 00:09:00 Electricity: 0.369 kWh x
x[2021-12-07 17:20:28][info][miner/0]: 17:20:26 New Job: 86168846 Epoch: #458 Block: #13759797 Diff: 17.45G x
x[2021-12-07 17:20:28][info][miner/0]: 17:20:27 GPU5: Share #4 verified on CPU, difficulty: 54.46G x
x[2021-12-07 17:20:28][info][miner/0]: 17:20:27 GPU5: Share #4 accepted 17 ms
|
|
|
|
Please Vega 56 users, could you tell me your HR with CN heavy / Haven / Tube algo(s) ?
Thx in advance.
Yeah I try to run conservatively as in not going for max hash but best power efficiency: TUBE = 1.35 kH/s pool side for 160w at the wall tube-haven-heavy give 2000+HR on any vega (56 or 64) and use etc 150W per cards etc: 1 rig 6*vega56hynix = 960W at the wall = 12200kh etc 1 rig 4*vega56 samsung = 720W at the wall 8700kh etc Nice which clocks do you use? mem core volts? |
|
|
|
|
Hey guys,
i am maybe in wrong forum.. but in Ethereum mining you prefer Phoenix or Team Red.. Team Red seems abit faster..
Just trying to get most out of the cards (i think like most of us here)
using Vega 56 on Ethereum..
Like on TRM i get 48.71Mh on Phoenix 44.47Mh seems like a pretty big difference?
good chance my Phoenix miner is not optimized.. so if any help info to fine tune for optimal hashrate is welcome i am running close to 360x Vega 56
|
|
|
|
|
Hey guys,
i am old school miner on Vega 56:)
i used TRM doing 44.5Mh but now i want to use Claymore (it's more legend miner), currently doing 43.5Mh losing 1Mh a card, i am mining with 380x Vega 56 and using MmpOS as OS is there maybe a switch optimizing the hashrate 1Mh loss might not seem alot but multiple with 380x it's actually alot
Cheers!
PS i use core 950 / mem 940Mhz (Hynix) or 960Mhz (Samsung) @ 837
|
|
|
|
Grin29 (Cuckarood29) would be awesome cause my little GTX1060 make 3,2sol and vega "only" 3,7sol (nbminer vs lolminer)
i´m sure you can tweak Vega over 4sol
Should we release c29d (pretty good chance we'll do so), I can personally guarantee you it will be > 4 g/s for any Vega at conservative clocks or I'll both eat my shorts and give you a free version. I'm getting 4.4~4.7 per vega on C29 which is basically nothing comparing to 1,2 on C31. You need to achieve at least 7.5~8 on C29 to be equal to current 1,2 g/s which vegas provide on C31. How do you get 1.2 on a Vega ( i assume 56/64 and not the latest vii?) |
|
|
|
|
Any word on hashrate MTP vega 56 on 0.5.6?
|
|
|
|
|
Doc,
Is there any reason why CNR is close to 10c hotter then CN Haven?
clock speeds same on same machine when i switch to CNR the temps are close to 10c hotter
|
|
|
|
How to get 0.9 on GRIN with Vega ?
I can't get over 0.77~0.8 no matter which settings I try.
Is CPU important ?
Thank you.
same here how C31 do 0.9 ? using Vega 56 btw |
|
|
|
|
any word on hashrate Vega 56 for Grin31?
|
|
|
|
|
Will this miner also support algo switching so we can move to auto algo switching pools?
since most mayor CN algos is now supported
|
|
|
|
|
Any news on support for Teamred 0.5.2 this minerbabe still on 0.4.4
|
|
|
|
Hello!
How has everyone been?
Z11 will be restocked tonight Beijing time 10 PM, so for those who are waiting to get some ZEC, tonight presents your chance!
Also, ZEC mining has been switched to PPS mode for the time being. We will also be doing a ZEC wallet maintenance for the next 72 hours. Deposit and withdrawal function are temporarily unavailable.
Let us know if you need more clarifications!
i see it's says stock: 195 AntminerZ11(Preorder) for August is it sold out? on one hand you give 195 stock on other hand you say its preorder, kinda confusing:) |
|
|
|
i cant seem to get miners stable at --cgputweakprofile 4,4,4,4,4
Only half seem stable (i am not on facility maybe just need to reboot or so i am using Awesome Miner)
i choose low value because default my hashrate is around 1.85Kh/s for CN R, which i think Vega should do atleast 2Kh/s
my startup commando is
--ccryptonighttype normalv4 --cgpuid 0,1,2,3,4 --cgpuworksize 16,16,16,16,16 --cgpuintensity 112,112,112,112,112 --cgputhreads 2,2,2,2,2 --cgputweakprofile 4,4,4,4,4
and use OverdriveNtools
core 1450/900
mem 935/900
are some settings off are am i missing a point/setting here?
The default ~1850hs without tweaks for a Hynix mem Vega seems ok with those clocks in SRB. So what is your hashrate with tweak_profile 4 ? Also are you cooling those Vegas enough ?  Hello Dok, They tend to 1950/1980 which seems decent if remain stable I run facility with also alot of Asics running also (around 70x) The miners dont go above 60c most play around 50 to 55 So i would say i cool the good also doing 900mV on mem I get ~2100hs on my Gigabyte V56 Hynix with tweak_profile 10, but i guess i am lucky. Going to implement a parameter than 'weakens' the tweak profiles in next version so maybe you will be able to achieve more hash. I am not even coming close to 10:)) 4 for doable it seems alot of rigs running 4 pretty much stable since i remote control the miners by awesome miner maybe a simple reboot Will do the fix |
|
|
|
i cant seem to get miners stable at --cgputweakprofile 4,4,4,4,4
Only half seem stable (i am not on facility maybe just need to reboot or so i am using Awesome Miner)
i choose low value because default my hashrate is around 1.85Kh/s for CN R, which i think Vega should do atleast 2Kh/s
my startup commando is
--ccryptonighttype normalv4 --cgpuid 0,1,2,3,4 --cgpuworksize 16,16,16,16,16 --cgpuintensity 112,112,112,112,112 --cgputhreads 2,2,2,2,2 --cgputweakprofile 4,4,4,4,4
and use OverdriveNtools
core 1450/900
mem 935/900
are some settings off are am i missing a point/setting here?
The default ~1850hs without tweaks for a Hynix mem Vega seems ok with those clocks in SRB. So what is your hashrate with tweak_profile 4 ? Also are you cooling those Vegas enough ? Hello Dok, They tend to 1950/1980 which seems decent if remain stable I run facility with also alot of Asics running also (around 70x) The miners dont go above 60c most play around 50 to 55 So i would say i cool the good also doing 900mV on mem |
|
|
|
|
i cant seem to get miners stable at --cgputweakprofile 4,4,4,4,4
Only half seem stable (i am not on facility maybe just need to reboot or so i am using Awesome Miner)
i choose low value because default my hashrate is around 1.85Kh/s for CN R, which i think Vega should do atleast 2Kh/s
my startup commando is
--ccryptonighttype normalv4 --cgpuid 0,1,2,3,4 --cgpuworksize 16,16,16,16,16 --cgpuintensity 112,112,112,112,112 --cgputhreads 2,2,2,2,2 --cgputweakprofile 4,4,4,4,4
and use OverdriveNtools
core 1450/900
mem 935/900
are some settings off are am i missing a point/setting here?
|
|
|
|
when i start miner with --cgputweakprofile 9,9,9,9 then the miner doesn't set level on 9
confirm. work only in gpu_conf Dok will you fix this? i think setting --cgputweakprofile then the miner should pick up the value, no? |
|
|
|
|
guys i have 16 rigs running and i saw that one rig was very low temp (which is very good with hot weathers coming)
so i was looking in Awesome Miner (i use AM to monitor) and saw this miner was running 1450 core and 935 mem the mem had 0.9volt
my other miners have 1.2volt which is why the temp is high i guess... so i taught maybe i have different ODNT setting but it's the same on all my machines
after a reboot volt went to 1.2 and temps 10c up... why is this happening is my ODNT not working.. if i look on miner it pushes the 1450 and 935 i set..
this is my ODNT startup settings:
GPU_P0=852;800;0
GPU_P1=991;900;0
GPU_P2=1138;950;0
GPU_P3=1269;1000;0
GPU_P4=1312;1050;0
GPU_P5=1474;1100;0
GPU_P6=1474;850;0
GPU_P7=1450;850
Mem_P0=167;800;0
Mem_P1=500;800;0
Mem_P2=700;900;0
Mem_P3=935;900
Fan_Min=3000
Fan_Max=4900
Fan_Target=50
Fan_Acoustic=2400
Power_Temp=80
Power_Target=0
i use Windows 10 latest build with 18.6.1 drivers.. i assume my miners ignore the 900mV but pushing 1.2Volts?
FIXED UPDATED TO 2.7 OVERDRIVENTOOL
|
|
|
|
|
Doc,
when i start miner with --cgputweakprofile 9,9,9,9 then the miner doesn't set level on 9
when i do + or - in the window it does adjust the level, so it does start with administrator
i am running my miners with Awesome Miner (miner being started with administrator privalige)
Why doesn't miner set the level at initial start and have to adjust manual..
|
|
|
|
Hello doktor,
I have the same problem with EIO.dll as livada on one of my rigs, the other rigs are working fine.
When I stop the miner, disable the auto run of it, and restart the rig I'm still unable to run WinAMDTweak.
Please advise if I can perform any testing/debug steps in order to assist you to debug the issue.
Regards
Contact me on PM. I solved this problem. Im not smart like DOCTOR but i solved this. use TRM and ignore DEVs that block programs that help us all like AMD MEM TWEAK
vega56 CNR= 2360HR (GPU1450mhz/870mv)(MEM 1100mhz/870mv)
Vega64 CNR= 2460HR (GPU1480mhz/870mv)(MEM 1100mhz/870mv) mem 1100mhz on Vega56? how do you do that? |
|
|
|
Yes it seems you have lost the block the pool OP is missing for around 6 months now so dont expect a reply from him anytime soon.
Make sure your address says self when mining here its the only way you get the reward.
When i was mining, the status was Self, that's why i kept mining, i know if you use wrong address it will say Pool in red i taught the devs had fixed with M address in the past i mined here with M address and it said pool (in red) how can pool say Self and not pay me out.. seems it's not fixed yet? is my current address ok? starting with 3 (status Self) |
|
|
|
|
Show Posts
