I think it will help to post this guide here.
1. Click on Masternodes button 2. Switch to My Master Nodes Tab 3. Click Create 4. Alias field: yourmasternodename 5. Address field: your ip:port example: 123.456.78.9:9999 6. Click OK 7. Select your new masternode and click "Copy Address" 8. Send exactly 10,000 TX coins to that address 9. Again select your new masternode and click "get config" 10. A window pops up - copy that and paste it in notepad 11. replace the fields that say "REPLACEME" with whateverrandomthingyoucomeupwith 12. add a line with this: staking=0 13. add a line with this: mnconflock=o 14. add a line with this: daemon=1 15. save as %appdata%\transfer\transfer.conf 16. restart your wallet 17. Click on Masternodes button 18. Switch to My Master Nodes Tab 19. Select your masternode and click "start" Congratulations, you got your self a master node Cool
*NOTES* *EDIT* wallet must be fully unlocked when you click "create" To send exactly 10k including fee it is easier to enable coin control in your wallet then select your inputs adding up to 10k plus ~1 coin then just type 10000 and your wallet will deduct the fees and will send one single and exact 10k input.
Your transaction must have at least 10 confirms in order to be used as a collateral address. I don't think having the port open is absolutely necessary but just to be sure, open it. Sometimes your external ip will not be detected so it doesn't hurt to add "externalip=yourexternalip" in another line in your conf file. Make sure your conf file extension is conf and not conf.txt I always use a fresh new wallet for the nodes so I can stake my MN payments in another wallet just for staking.
Example transfer.conf file
rpcallowip=127.0.0.1 rpcuser=REPLACEME rpcpassword=REPLACEME server=1 daemon=1 listen=1 mnconflock=0 staking=0 port=REPLACEMEWITHYOURPORT masternode=1 masternodeaddr=123.456.789.123:9999 masternodeprivkey=REPLACEMEWITHYOURMASTERNODEPRIVATEKEY
|
|
|
So I submitted a request with https://www.livecoin.net/ about adding Transfercoin. Below is the response. I would like as much feedback. The have fiat pairings with there coins listed. Video: (How to trade bitcoin and other cryptocurrencies) https://youtu.be/JOMS_0Kc64UI have not traded there, as I have not had any available BTC. Hello. We can list your coin at our exchange, subject to the following conditions: 1. Orderbook can't be empty, you or your market maker need to maintain enough liquidity. In case of long emptyness of orderbook, coin can be delisted. 2. After coin adding, we need to be listed/announced as exchange at sites/forums concerning your coin, i.e. bitcointalk topic, your website, maybe something else if applicable. Let me now If this works for you. Best regards, LiveCoin.net Edit: I just emailed this to Livecoin. Hello I believe that we can meet all of the conditions. Currently I am getting feedback from our community about the exchange and there feelings on it. I was wondering if you would stop by our thread and just introduce yourself to our community. People love the look of the exchange and a couple of people have signed up for accounts already. Everyone has been praising the platform as very nice. One of our community guys is gonna add the api to his IRC bot that is used in a lot of channels or traders and exchanges. Thread: https://bitcointalk.org/index.php?topic=1203975.0You will have a place on http://transfercoin.io/ and any site we put up. Of course our thread will have you and i will promote the exchange on my twitter accounts. Thank You, @wigitgetit (Twitter, IRC, Bitcointalk) This would be a really good step for us IMO. Heres a few reasons I'm being swayed toward yes. The exchange has been operating for 3.5 years. Offers Fiat trading and USD conversions and withdrawals Has a low number of coins on the exchange With a large amount of activity Offers 3 different levels of referrals. (10% permanently) or (20% / 6 months) or (50%/ 1 month) And when wigitgetit contacted them, They responded in less than 24 hours. Which should be REQUIRED of any exchange platform. If you guys would like to sign up, and check out the website I've left a referral link at the bottom. As well as my Referral code. https://livecoin.net?from=Livecoin-1qufzqNcLivecoin-1qufzqNc I just signed up with your referral code
|
|
|
I believe 250,000 Satoshi is the fair value of TX
|
|
|
Once China and Russia find out about TX they will push the price up.
Darksend InstantX CrossSend TOR Inwallet Trading.. Android Wallet incoming..Payment Gateway... Trading Bot... and we are still under the radar... NOT FOR LONG!! And that is why I am buying 30,000 TX more
|
|
|
I have been trying to run 4 Masternodes on the same wallet and machine and they drop after some time. I'm not sure what I'm doing wrong.
|
|
|
Once China and Russia find out about TX they will push the price up.
|
|
|
What is the ETA for the Bittrex TX wallet to be online. It's disabled
Just released another fix for them I havent heard back from richie yet, But I'll update everyone when I do Thank you.
|
|
|
What is the ETA for the Bittrex TX wallet to be online. It's disabled
|
|
|
My Masternode will be down for a while. I'm adding 3 more Masternodes maybe 7
|
|
|
How do you setup the transfer.conf file in order to run 3 Masternodes from the same wallet
Instead of using the transfer.conf file. When controlling multiple masternodes from a single wallet. You switch over to a new file named "masternode.conf" for every line is a new masternode. and each of the entries are spaced out by a single space. on each line youll have Alias, IP:Port, masternode private key, transaction hash, transaction ID The transaction ID can be found using the "masternode outputs" command from the console. This is the way to run multiplayer Masternodes from the same wallet
|
|
|
Can you run two or more masternodes in the same wallet or do you need to run two wallets from two different data directories?
You have to run from two diff data directories, if you want to use the same machine. Yes, yes, thats what I thought, I will set it up. I have one masternode running at the moment...it's staking fine, I just hope the coin and the dev will stick around and see it through. So far, the dev has been excellent in getting all the wallets out and keeping people up to date... I got enough TX to set up 10 more Masternodes
|
|
|
DASH has 3,475 Masternodes running, that is 3,475,000 DASH out of the exchanges witch is a bit more than half of their coins outstanding. We need to get 265 TX Masternodes running. That will be 2,650,000 TX out of the markets. TX will be the most X11 POS coin out there with features that are actually working. Let's create the TX Masternode Campaign to achieve that goal.
I am all for this. Lets get some good instructions on making masternodes on VPS servers and I will do 10-15 myself. Awsome. I can do 7 Masternodes
|
|
|
DASH has 3,475 Masternodes running, that is 3,475,000 DASH out of the exchanges witch is a bit more than half of their coins outstanding. We need to get 265 TX Masternodes running. That will be 2,650,000 TX out of the markets. TX will be the most X11 POS coin out there with features that are actually working. Let's create the TX Masternode Campaign to achieve that goal.
|
|
|
When can we see C0CO on Bittrex
|
|
|
Mac https://www.dropbox.com/s/3n39wddmcmcehov/Transfer-Qt-1.2.2.2-61402-mac.zip?dl=0I'm working on getting myself an r-pi so i'm able to build and release a new r-pi client every time I do something like this. QEMU is what I was using to try and build the r-pi clients with. but it is absolutely brutal to deal with. I'm going to take a shot at the android wallet, to try and save a bit of the development funds for other projects. If I feel like I'm wasting too much time on it and can't find any help. I'll pay for the build as planned. Just trying to save a bit of the development funds for other projects that I have no hope of doing myself. One of the reasons I am interested in working on the R-pi is that it's very low cost to run, And can provide a bit more security than storing your wallet on your everyday machine. Another reason is that we've had an offer to be implemented into a raspberry pi service, that provides downloadable images with pre built clients on them. This would make it much easier for new users that are familiar with the pi to get our client, and start using TransferCoin. Also a reminder for anyone on c-cex to vote for Transfercoin if you have not done so already the link is below ! https://c-cex.com/?id=voteThis is awsome. With r-pi and TX. Tax will be the most profitable coin to hold. We need to set up a DEV fund. Come on TX community let's all step up to help with funds.
|
|
|
I can't wait to get out of work. Go home and set up 4 more Masternodes.
|
|
|
Get some cheap TX at Bittrex
|
|
|
I need to buy up 10,000 TX more.
|
|
|
TX is not disabled on Bittrex
|
|
|
I wish I had an extra 0.83 BTC to buy those 50,015 TX at Bittrex selling for 1,675 Satoshi. This is a steal.
|
|
|
|