Auto no more work. 5*7970+2*r7265=2 chains per day. target = "11" R9 390 - 0,34 cpd 1CPD with target 11 = 30CPD with target 10!!R9 390 must show 14 CPD with target=10 and 0.5 CPD with target=11 Vega - 0,61 cpd It's good result for Vega now. honest 8 cents a day. Write difficulty=11 in calculator.
|
|
|
0.5 chains/day is not properly result, may be different version drivers conflict. Try it on newly installed OS. Do we need new compiled kernel for those settings? Yes. For me Fury X 9.4.1 :15-16 CPD,10.2 :13-14 CPD With same driver version ?
|
|
|
Im getting less CPD with the new miner v10.2. Less ~-15% in all my gpus. I have 290x, 290, rx470 and others. Im using the blockchain driver. With the 9.4.1 version, i get 14,5 cpd on the 290x's, but with the 10.2 version im only getting 10 ou 10,5 cpd
Do you recommend a specific driver version?
Im doing experiments with other drivers
xpmclient 9.4.1 has kernel compiled with old catalyst 14.6 driver (blockchain driver not optimal for xpm), new 10.2 miner don't have that. Miner version 10.x uses file names like kernelxpm_gpu0.cl for first GPU, kernelxpm_gpu1.cl for second, etc. You can try copy kernel from miner 9.4.1 to directory with 10.2 and rename it according to rules, but it can be incompatible (for example it not works on linux with amdgpu-pro drivers) or use another drivers. Do you recommend a specific driver version? For Hawaii (R9 290X) optimal driver is old Catalyst 14.6. R9 390X not supported by this driver, I recommend use Catalyst 15.12 with replaced amdocl* dll from 14.6 (tested on ubuntu 14.04). For rx470 almost all Crimson 16.x is good, 17.x and linux amdgpu-pro gives poor performance (less than 7 CPD on RX470), don't use it.
|
|
|
WARNING: difficulty grows and can reach 11! All previous xpmclient versions automatically switch off when work with difficulty 11 will be received! You can follow 2 ways: 1. Manually edit config.txt when difficulty reach 10.99+ # Target Cunningham chain length, default = auto (adjust to difficulty) target = "11";
# Sieve layers number, optimal value is target*2; default = auto (target*2) width = "22";
2. Use new version 10.2-beta. ... New xpmclient version 10.2 beta available HERE. New features: - Radeon RX Vega support. See config.txt # Platform: # "amd": AMD GCN cards # "amd legacy": AMD HD5xxx & HD6xxx cards # "amd vega": AMD Vega cards # "nvidia": NVidia Maxwell cards platform = "amd vega";
With "good" drivers you can get 14,5-15 CPD on Vega56 and more than 16 CPD with Vega64. What is "good" drivers? Need more statistic from miner users. - Difficulty target automatic switch. For use this feature, edit config.txt: # Target Cunningham chain length, default = auto (adjust to difficulty) target = "auto";
# Sieve layers number, optimal value is target*2; default = auto (target*2) width = "auto";
With this settings miner automatically switch to target=11 when difficulty reach 10.991. Remember, that CPD with target 11 will be less by 28-29 times than you see with target=10!
|
|
|
How much u can get from a Vega 64?
I got result 14.5 CPD on Vega 56 on Windows 10 and Crimson 17.9.2 drivers. Vega support and target auto switch (for difficulty > 11) will be available in xpmclient 10.2 beta in next 2 days.
|
|
|
26 Jan 2017: coinsforall.io repaired after primecoin daemon crash, miners will receive compensation for 5 hours Done.
|
|
|
26 Jan 2017: coinsforall.io repaired after primecoin daemon crash, miners will receive compensation for 5 hoursI have lost connection today to xpmforall and coinsforall via rostelecom (russia): C:\Users\rootuser>tracert xpmforall.org
Трассировка маршрута к xpmforall.org [37.187.50.246] с максимальным числом прыжков 30:
1 <1 мс <1 мс <1 мс 192.168.1.1 2 4 ms 5 ms 3 ms 80.234.75.98 3 4 ms 4 ms 4 ms 213.59.233.144 4 43 ms 43 ms 43 ms ae40.stkm-cr4.intl.ip.rostelecom.ru [217.107.67. 31] 5 44 ms 43 ms 43 ms hu0-2-0-0.ccr21.sto01.atlas.cogentco.com [149.6. 169.145] 6 45 ms 43 ms 43 ms be3377.ccr22.sto03.atlas.cogentco.com [154.54.36 .89] 7 68 ms 68 ms 68 ms be2282.ccr42.ham01.atlas.cogentco.com [154.54.72 .105] 8 77 ms 76 ms 77 ms be3029.ccr21.prg01.atlas.cogentco.com [154.54.59 .62] 9 * * * Превышен интервал ожидания для запроса. 10 * * * Превышен интервал ожидания для запроса. 11 * * * Превышен интервал ожидания для запроса.
I will solve this problem for myself with 3g modems, but it is main provider in russia...
I have checked some providers, no problems detected.
|
|
|
coinsforall.io is worthless again
It works. At me on Vega 56, 9.4.1 simply falls For Vega required patched miner, I did not release it due to low performance. will you optimize the code for vega - fiji ? fury x is showing lot of potential on this coin --- atm 19 cpd but high power ... if i want to cut power i can get half power @ 14 cpd.
19 CPD is good for Fiji GPUs, optimization can't give a big performance advantage on Fury X.
|
|
|
They are legit, but huge problems with sync'' with network, If someone could upload blocks + chainstate folders, that would be very helpful.... You can try this snapshot http://89.179.119.195:8080/primecoin_blockchain_20171214.zipOld client based on bitcoin 0.8.3 synchronizes too slow now, it's become a problem.
|
|
|
Может кто-нибудь поделиться списком узлов для запуска полной ноды? Или для этого обязательно требуется получать инвайт и спрашивать в слаке ?
Насколько я знаю только обмен, ты указываешь его, а он твою. И где же таких желающих искать? Может они сюда заглядывают?
|
|
|
Может кто-нибудь поделиться списком узлов для запуска полной ноды? Или для этого обязательно требуется получать инвайт и спрашивать в слаке ?
|
|
|
I was contacted by a community member that likes to give Primecoin a boost and 'relaunch it in the cryptosphere'. He looks for other developers and pool operators to work with and discuss release of a new Primecoin version based on latest bitcoin code. For that Primecoin community should seek to gather some funds for developments and marketing as well. I think that moving Primecoin to latest bitcoin code is not enough to relaunch.. community need full development roadmap. Do someone have ideas/features list for implementing in future Primecoin releases?
|
|
|
Both pools are returns, OVH fixed their issues. This day not good for many other pools https://bitcointalk.org/index.php?topic=2378262.0Vega 56 without optimizations - 11.5 - 12 CPD only.
With optimization, how much? In theory, I think 20-22CPD for Vega 56 if neccessary optimization can be implemented.
|
|
|
CoinsForAll.io is offline again??
And again now? with xpmforall. They are both on one server? it is normal? They are both on one server? it is normal? No, different servers and datacenters, but both use OVH. SBG: ERDF is trying to find out the default. 2 separated 20kV lines are down. We are trying to restart 2 generators A+B for SBG1/SG4. 2 others generators A+B work in SBG2. 1 routing room is in SBG1, the second in SBG2. Both are down.
RBX: UP SBG: in progress
xpmforall.org returns, wait coinsforall.io ...
|
|
|
Before pools works stable except small issue with coinsforall, but now OVH hosting have problem. https://twitter.com/ovh_frEn plus de souci sur SBG, nous avons le souci sur le réseau optique en Europe qui interconnecte RBX et GRA avec les POP. Il est down (!!). Nous avons un souci d'alimentation de SBG1/SBG4. Les 2 arrivées électriques EDF sont down (!!) et les 2 chaines de groupes électrogènes se sont mis en défaut (!!!). L’ensemble de 4 arrivées elec n'alimentent plus la salle de routage. Nous sommes tous sur le problème.
Google translate: In addition to worry about SBG, we have the concern about the optical network in Europe that interconnects RBX and GRA with POPs. He is down (!!). We have a problem feeding SBG1 / SBG4. The 2 electric EDF arrivals are down (!!) and the 2 generator sets have failed (!!!). The set of 4 arrivals elec no longer feed the routing room. We are all on the problem.
|
|
|
anyone got idea how vega performs on this ? my fury Xs can get up to 19 CPD each at 325w from wall...
Vega 56 without optimizations - 11.5 - 12 CPD only.
|
|
|
Сам Соколовский на биток переходит, отличная новость! Как думаете, биток теперь в рост пойдет, можно закупаться?
|
|
|
Somebody found second Cunningham chain with length of 14 Block with 14ch is not first in XPM blockchain, let's wait 15ch do you plan to release an optimized version for vega ? it should be a monster card for this coin. due to its high precision... just like previous generation furies and pro duos... Before Fury X release miners wait a huge performance advantage, now is same history with Vega In a middle of september I'll make some research about vega performance in XPM algorithm and if it possible - release separate kernel.
|
|
|
eXtremal, Why not do pool payments xpmforall? Please, check AZaaXuBoetgEVSQGkmEnjq9ULPG3ZUuGzP wallet.
Minimal payout - 4 XPM (except first payment 1 XPM), you have only 3.16.
|
|
|
Why only the course up so immediately problems with the output Until you sell, do not pay Now XPM at its 3 year high, payment queue empty on both pools, any proof about payment problems ?
|
|
|
|