Ive seen crazier things for sale on here, so I figured I would throw my Cressidas up here to see if anyone would be interested. Motivated to sell, prices are OBO, and willing to make BTC. Also just a FYI, cars are located in Dacula, GA about 2 miles away from Mall of Georgia.


What I have here is a 1991 Toyota Cressida with a 1JZGTE swap in it with a 2JZ auto transmission and a 2800 stall. Here is the history about the car:

I purchased the car 3 years ago. The car was said to only need a few wires run and that was it. I purchased the car and sent it over to Garage Zero. John over at GZ got the wiring done and when I went over to hear it start up for the first time the car just turned over and that was it.

After a few days of swapping out parts and checking everything we could we found out that the ECU had some blown caps so we ordered a new ECU. Once the ECU came in the car started up just fine and ran great. I went over to pick the car up and put it in reverse and guess what, there was no click. We pushed the car back and then I put it into drive to at least get it out of the shop. It clicked into drive but it was 2nd gear. I got the car out of the shop and home, with only 2nd gear and a slipping 3rd, and the car sat.

After a few weeks I found a 2JZ tranny that was built with a 2800 stall for sale. The transmission was still in the car so I went over and tested it out and told the guy I wanted it. He pulled the transmission out and I was on my way to swapping mine out.

After figuring out that I needed a LOT more than just the transmission, tail shaft, flywheel, ect, I finally was able to swap everything out. I put the new transmission in and not thinking went to hook the drive shaft up and nope, need something else. Custom drive shaft.

I got the drive shaft made, but am having trouble getting the correct pitch from the engine/transmission to the rear end. This is where the car is right now. I am tired and done with this car and with school tuition approaching again I am just going to cut my losses and say goodbye. Here is a list of what I know need to be done to the car to get it back on the road:

Get correct pitch from transmission to drive shaft
Hook drive shaft up
modify shift linkage (bend it) so it clears drive shaft
fill transmission with fluid
purchase intake filter
tires are dry rotten and shot so get tires
build exhaust
DRIVE!!!

The car drove great that one time I was able to bring it home from the shop, only in 2nd gear at least. Per the previous owner the engine had between 60k-65k miles, not sure if I believe him but thats what I was told. The new transmission had less than 10k on the rebuild.

Inside the car everything is there. The glove compartment is pulled out on the passenger side at the moment so we could get to the ECU, but it should only take a few moments to get that all put back together.

One final note. I know what the engine/transmission costs in this car. Do not try to low ball me on this. If I have to I will take the engine and transmission out and sell them separately and junk the shell. For more information or pictures or to view the car email me or call me. Also you can talk to John over at Garage Zero in Norcross about the car, he is very familiar with it.

Title in hand

To get the ball rolling:
Asking Price $5500 obo

CAR COMES WITH OZ RACING RIMS NOT THE WHITE ONES SHOWN IN PICTURES ABOVE, THEY WERE STOLEN A WHILE BACK

For more info or pictures feel free to contact me
dtmcnamara@gmail.com
David McNamara







MOST RECENT ENGINE BAY PICS TO SHOW IC PIPE IS DONE







1987 Toyota Cressida
Chassis shows 300,xxx miles
Engine/Transmission from a 1982 Supra w/ 100k miles
16x8 0 offset XXR 522 wheels
Tien Coilovers in rear, stock up front w/ GC kit
Straight pipe exhaust (been repaired 10-20 times under the car due to height)
FD RX7 Oil Cooler w/ goodyear hoses
Oil Filter relocation kit
Yakima old skool rack (with keys and 1 bike bar)
EGR delete

Good:
-Transmission shifts smooth
-Interior in great condition (minus the one hold in the dash where the previous owner had a stupid tach)
-Heated mirrors still work!!!
-New timing belt, plugs, wires, fuel pump less than 500 miles ago
-All new seals (HG, Oil pan, cam, etc)
-No rust

Bad:
-Blower motor went out
     Heat worked and a/c worked when the blower was working. The a/c did need a recharge every year, but it did work
-Sunroof stopped working
     Never worked since I purchased the car 5 years ago
-Engine smokes a little

I know I am forgetting a TON but I needed to start this thread now while I had the pictures. When I get home I will take more pictures of the inside and outside. I will also verify the mileage on the chassis.

Price: $4500obo
Contact:
David McNamara
dtmcnamara@gmail.com

Car located in Dacula, GA








Newer Engine that was put in the car

Did you read the OP at all?

How soon are you trying to get off of them? Interested in all 4, shoot me a PM so we can talk. Would have the funds here Friday.

Look forward to talking to you

LOL

+ computer
or
+ Rpi and compatible USB hubs

I have had GREAT luck with CampBX if you can stand the horribly slow site they are great as far as getting cash to your account quickly. Canary ITM can vogue, I have purchased over 160 units and did all my money transfers through CampBX with no longer than 24 hours waits once they received the money orders in the mail.

Sent you a PM.

Here are what I am using:

Anker Uspeed 10-port
You need to find the older model w/o the 9+1 charging port on it

If you need something quick with only 5 usable ports the Cyber Power CP-H720P. Although its 7 ports you can only use 5 at a time without usb extensions. Like I said if you only need 5 ports, or need something TODAY you can get these at Frys, Micro Center and other computer stores for $29

Found a few for 800. Still better to get the ankers if running on a computer. If I was only running a raspberry pi this would be the best option

You act like this is something you can just do...its takes 30 days.

you are the man! Now I just need a 50A 150port USB hub!

BTC sent at 9:20am

Sent you a message. Let me know when you get it

thanks

Still waiting on my account to verify with a few sites so I am trying to get this order in before they are up and going. Like the title says, looking to purchase upwards of $5,000 in BTC but want to do it face to face with cash.

Meeting Location: Wellsfargo (I will pull the cash out in front of you so you know its all real)
Meeting Area: Anywhere between Dacula, Snellville, Duluth, Atlanta
Meeting Date: Before 7/10/13

Shoot me a message if you are local and are wanting to sell at least $1000 at a time.

Thanks
dtmcnamara

How long until these are back in stock? I just got funds from all my co-workers for 50 units and want to place the order as soon as we can.

HAHAHA

So...how does one get on the list to be a tester of the USB device you will be giving out in August? Would love to be one of the few, have lots of video equipment and am willing to document everything.

Why does your Ebay profile say you are located in the Netherlands, yet in your auction you state it will ship from Florida?

Also why such a long gap in your history on Ebay? Sort of odd that you dont sell anything on Ebay for 2 years, then you sell a $18,000 item to a guy who also has a strange history as well.

Just say'n...

Whats your order number so we can estimate delivery?