jo,
ich meinte jetzt nicht wegen der Kohle - der Preis ist Klasse - aber ich habe nun schon mehrfach von einer SCAM Warnung gelesen. Mich würde eher die Meinung zu Hashra als Hersteller und derren Vertrauenswürdigkeit interessieren.
Das sie ihren Termin verpasst haben kann ja passieren - ist wohl auch nicht unüblich. Aber sind sie vertrauenswürdig.
Gruss Stefan
|
|
|
Hi,
mal ehrlich - eine 100MHs Kiste für 450$ inkl Versand klingt schon sehr verlockend. In der Vergangenheit war hashra wohl auch zuverlässig aber wie sieht es denn nun aus ?
Ich hätte schon Lust mir so eine Kiste zu bestellen - da kämen dann noch 20-30% Steuer / Zoll drauf dann wären wir bei 500 Euro für 100MH@700W
klingt nicht schlecht aber sind die nun zuverlässig oder nicht ?
Was meint Ihr ? Gruss Stefan
|
|
|
Hi, das klappt alles so gut - ich werde ihm heute meinen 2. Miner senden. Bisher kann ich den Service nur empfehlen.
Gruss Stefan
|
|
|
Alles super !
Miner läuft und das Webinterface ist per VPN erreichbar.
Gruss Stefan
|
|
|
Hallo Stefan, sorry für die späte Rückmeldung. Der Miner geht natürlich heute noch wie versprochen online. Manchmal bin ich froh, dass ein Tag 24 Stunden hat! VG Daniel Daniel schuftet bis spät Abends damit mein Miner noch aktiv wird - er läuft - ich kann erste Leistung im Pool erkennen .. Ich entschuldige mich für falsche Ängste und kann nur sagen. SUPER Hat seine Versprechen eingehalten. Gruss Stefan
|
|
|
- Die Miner sind spätestens einen Tag nach Anlieferung online und erreichbar. ..gespannt, ich habe gestern einen meiner Miner zu Truman gesendet. bin ja mal gespannt ob der Miner heute online geht .. bisher habe ich nichts mehr von ihm gehört. Stefan Das heißt er kann frühestens heute dort angeliefert werden und ist am darauf folgenden Tag spätestens online. immer ruhig bleiben. Sorry hab mich falsch ausgedrückt, der Miner wurde gestern um 13:00 angeliefert. Also müsste er heute online kommen. Leider habe ich keine Reaktion von Truman erhalten - weder per Telefon noch auf PM von gestern oder heute noch auf ein Mail. Wenn ich einen Termin nicht halten kann dann sag ich zumindest bescheid da Truman heute schon mehrmals online war wäre das bestimmt möglich gewesen. Aber wahrscheinlich hast du recht und ich muss einfach nur Ruhe bewahren - leider fühlt man sich manchmal in dem Miner-Umfeld wie auf einem Mine(r)nfeld und weiß nie genau wann man auf eine Scammine tritt. Gruss Stefan @Truman sorry falls ich Dir unrecht tue aber gebrannte Kinder scheuen das Feuer - aber ohne Feuer fehlt einem dann doch was ...
|
|
|
- Die Miner sind spätestens einen Tag nach Anlieferung online und erreichbar. ..gespannt, ich habe gestern einen meiner Miner zu Truman gesendet. bin ja mal gespannt ob der Miner heute online geht .. bisher habe ich nichts mehr von ihm gehört. Stefan
|
|
|
Hi,
ich habe gerade das Announcement zum Antpool von Bitmain gelesen. Darin wird auf die unterschiedlichen Pooltypen hingewiesen ..
- stratum - solo - p2p
Ok Solo denke ich bedeutet man arbeitet alleine an einem Block - je nach hashleistung und Glück dauert das ne ganze weile dafür bekommt man aber gleich 25 BTC wenn es klappt.
Wo liegt aber der unterschied zwischen stratum und p2p ?
Gruss Stefan
|
|
|
Hi all,
I bought 3 used asicminer tubes with BE-Controller for each. The run fine 24h in a pool like ghas.io but when I try to run a proxy based on BFGMiner , no difference if windows or linux, the miner or the controller suddelny stops workig. Sometimes the setup recovers on it's own, sometimes I have to unpower the controller and sometimes I have to unpower controller and the tubes.
If this happens only the first LED is flashing on the controller.
Does anyone have an Idea what I should change in the bfgminer config ?
Regards Stefan
I'm using bfgminer 4.7.2 with no problems using proxy. My start up is "bfgminer.exe -o stratum+tcp://uk1.ghash.io:3333 -u x -p x --stratum-port 3333 --set-device PXY:diff=512" I also am able to mine on f2pool,btcguild, no eligius yet (keeps disconnecting with same symptoms you are having). Ah ok - I discovered the Problem using eligius too. So it's pool dependend ?! Anyone here mine successful in eligius using a Asicminer Tube ? Anyone tried mining in eligius using Slushs Proxy or CKPool ? Regards Stefan
|
|
|
Hi Dogie,
looks like you are the one with the most knowledge about the Tube / Asicminer. I hope it's ok to write you a PM - I didn't found an Answer in all the threads to my Problem.
I bought 3 used asicminer tubes with BE-Controller for each. The run fine 24h in a pool like ghas.io but when I try to run a proxy based on BFGMiner , no difference if windows or linux, the miner or the controller suddelny stops workig. Sometimes the setup recovers on it's own, sometimes I have to unpower the controller and sometimes I have to unpower controller and the tubes.
If this happens only the first LED is flashing on the controller.
Do you have a hint what I could check or modify ?!
As a side note - do you know what "Smart" means on the Controller setup Page ?
Thanks Stefan
BFG proxy cutting out requiring a controller reboot is a known problem unfortunately, no solution. Ignore smart/normal, we don't need it (and not actually sure what it is). So the best sollution is use a supported pool - or use another proxy like ckpool ? I like the ncurse Interface in BFGMiner - ist it possible to use proxy chaining ? Regards Stefan Support pool, or find an asicminer usb adapter and use cgminer on a Pi or windows PC. You mean find a working USB adapter... What do you mean by "USB Adapter" ? Is there a way to replace the BE Controller with an USB Controller ? Regards Stefan
|
|
|
Hi Dogie,
looks like you are the one with the most knowledge about the Tube / Asicminer. I hope it's ok to write you a PM - I didn't found an Answer in all the threads to my Problem.
I bought 3 used asicminer tubes with BE-Controller for each. The run fine 24h in a pool like ghas.io but when I try to run a proxy based on BFGMiner , no difference if windows or linux, the miner or the controller suddelny stops workig. Sometimes the setup recovers on it's own, sometimes I have to unpower the controller and sometimes I have to unpower controller and the tubes.
If this happens only the first LED is flashing on the controller.
Do you have a hint what I could check or modify ?!
As a side note - do you know what "Smart" means on the Controller setup Page ?
Thanks Stefan
BFG proxy cutting out requiring a controller reboot is a known problem unfortunately, no solution. Ignore smart/normal, we don't need it (and not actually sure what it is). So the best sollution is use a supported pool - or use another proxy like ckpool ? I like the ncurse Interface in BFGMiner - ist it possible to use proxy chaining ? Regards Stefan
|
|
|
Hi all,
I bought 3 used asicminer tubes with BE-Controller for each. The run fine 24h in a pool like ghas.io but when I try to run a proxy based on BFGMiner , no difference if windows or linux, the miner or the controller suddelny stops workig. Sometimes the setup recovers on it's own, sometimes I have to unpower the controller and sometimes I have to unpower controller and the tubes.
If this happens only the first LED is flashing on the controller.
Does anyone have an Idea what I should change in the bfgminer config ?
Regards Stefan
|
|
|
Hi,
how can I became a VIP ? Thanks
Stefan
|
|
|
Hi,
kannst du mir ein Hostingangebot für einen Asicminer Tube machen. Danke Gruss Stefan
|
|
|
Hi,
I like to try some Beef Jerky, what are the conditions with shipping to Germany. Do you offer some kind of sample or mixed offers to try differend kinds of jerky at low price ?
Regards Stefan
|
|
|
aber ähmm ich wollte doch bin gerade heim und jetzt sind sie weg danke ....
Stefan
|
|
|
Ich hätte bei LTCGear noch 17 Farm$hares die ich ggf. abgeben würde.
Gruß Carsten.
das entspricht ca 1MH - was willst du dennd afür ? Gruss Stefan
|
|
|
Hi,
natürlich kann man Paypal Guthaben auch wieder auszahlen lassen, nur muss man hierfür ein Bankkonto mit Paypal verknüpfen und das wollen viele nicht. Ausserdem ist es so dass es durch "Käuferschutz" relativ einfach ist per Paypal gezahltes Geld zurück zu holen - daher eher unbeliebt.
Gruss Stefan
|
|
|
|