The mined rewards are 1 coin per block with blocks every 1 minute = 1440 coins minted per day. The coin is less than a week old, so less than 10k coins should be in existence. Now look at the orderbook chart on yobit. Just as the dude above notes. SCAM
i'd say thats more a statement about yobit, cryptsy had well over 500btc worth of 42 in the early days, lots of exchanges do this. |
|
|
|
SCAM ALERT
The scum who created this coin has premined 99.5%
You have been warned
Ask any mining pool to add node deployment for proof.
fresh from main.cpp: int64 GetBlockValue(int nHeight, int64 nFees)
{
int64 nSubsidy = 1 * COIN;
if(nHeight == 1)
{
nSubsidy = 799005 * COIN;
}
// Subsidy is cut in half every 811111 blocks
nSubsidy >>= (nHeight / Params().SubsidyHalvingInterval());
return nSubsidy + nFees;
}
nSubsidyHalvingInterval = 811111;
he got 799005 premine (as he stated) then from block 2-811111 its 1 coin output and so on |
|
|
|
thats cryptopia's block explorer at its finest, node is fine. your coins are still safe. open your wallet, go to console enter (without quotes) 'dumpprivkey 1MNv4VRxU8rpcK5jsdn9rDbrtAKDNjpWx1' copy the big string it displays into notepad close wallet goto start > run > enter '%appdata%' (without quotes) open the folder for 66 rename wallet.dat to wallet.dat1 open your wallet again, go to console enter (without quotes) 'importprivkey <big string from notepad>' (without quotes or signs) when sending to cryptopia, limit your sends to 0.05 feel free to flick some to 1Q9Cqm39Ancfr2ncCKt2agA5YTSomUp4gx  |
|
|
|
some progress: root@loderunner:~/sixeleven/src# ./611d -server -daemon -rpcuser=barrystyle -rpcpassword= -datadir=datadir -maxconnections=4 getblocktemplate error: {"code":-1,"message":"getblocktemplate [params]\nIf [params] does not contain a \"data\" key, returns data needed to construct a block to work on:\n \"version\" : block version\n \"previousblockhash\" : hash of current highest block\n \"transactions\" : contents of non-coinbase transactions that should be included in the next block\n \"coinbaseaux\" : data that should be included in coinbase\n \"coinbasevalue\" : maximum allowable input to coinbase transaction, including the generation award and transaction fees\n \"target\" : hash target\n \"mintime\" : minimum timestamp appropriate for next block\n \"curtime\" : current timestamp\n \"mutable\" : list of ways the block template may be changed\n \"noncerange\" : range of valid nonces\n \"sigoplimit\" : limit of sigops in blocks\n \"sizelimit\" : limit of block size\n \"bits\" : compressed target of next block\n \"height\" : height of the next block\nIf [params] does contain a \"data\" key, tries to solve the block and returns null if it was successful (and \"rejected\" if not)\nSee https://en.bitcoin.it/wiki/BIP_0022 for full specification."} however, stratum still can't connect; because 611d doesnt understand json 2.0 rpc batch.. i'm about halfway through on that.. |
|
|
|
On a lighter note - was just about to post this: hi all, pool available at http://bazco.inminimum payouts 0.00001 66 payments processed every 60 seconds initial diff 512 (range 1-1048576) stratum at stratum+tcp://bazco.in:3334 username is your 66 address password doesnt matter ie. bfgminer --scrypt -o stratum+tcp://bazco.in:3334 -u <66 address> -p x have fun james |
|
|
|
My withdraw is still not confirmed. Frustrating. Took me over 6 months of mining to earn those coins.
Status: 0/unconfirmed
Date: 4/19/2016 06:15
From: unknown
To: 1MNv4VRxU8rpcK5jsdn9rDbrtAKDNjpWx1 (own address)
Credit: 0.83611608 66
Net amount: +0.83611608 66
Transaction ID: 5a15cea123c1d72a34eec357515a077827a371a5af041c9aefa3cd754b61f9e6
what blockcount is your wallet showing? |
|
|
|
hey guys can I asked some help from you? I have 500 blry from OP but I mistakenly send it to yobit using bill wallet how can I get back my blry? yobit isn't replying to my support ticket, I only send them multiple report is there any one can help me with this mistake? Thank you BLRY community.
I think wallet giving error when you write wrong it is an honest mistake sir I want to send my blry to trade from yobit after we join them but my mistake instead to send it to my blry wallet it happen than I've send it to my bill wallet so i ask support from yobit but until now no reply from them. Post in the Yobit thread in this forum or go to the trollbox in hopes to seeing an admin there. just clarifying.. you sent 500BLRY to your BILL address at yobit? if it accepted the BILL address; then nothing. however try this: open your billarycoin wallet open your console, type 'dumpprivkey <your BLRY address>' copy the privkey (big long string) to notepad close your billarycoin wallet open start > goto run > type %appdata% find BillaryCoin delete your wallet.dat (or rename to wallet1.dat just in case) reopen billarycoin wallet open your console, type 'importprivkey <private key>' this will take a little bit to rescan the chain; but if your coins did not get included in a tx/block, they will reappear. |
|
|
|
|
<REMOVED>
sorry guys - limited pow period coin, which is currently being flogged out at 25gh
|
|
|
|
|
bazco.in node operational, with pool, since april 16 (5 days now).
|
|
|
|
|
i attempted to splice getblocktemplate in last night; however json 2.0 calls are also not implemented which makes it a bit more difficult (resulting in errors relating to batch rpc). will release the code on my github as a fork if i have any success.
|
|
|
|
|
hire yourself a node from digitalocean,
download and compile bitcoind, with a stratum pointed at it,
then throw the rest into nicehash.
might end up finding you a block of bitcoin.
1.5BTC will get you 4000Th (4 Petahash) for approximately 2 hours and 48 minutes.
or 8000Th (8 Petahash) for 1 hour and 24 minutes (assuming a rate of 0.0032BTC/Th/day).
i managed to luck out on christmas last year; found a block of Litecoin with a measly 0.05BTC of scrypt hashpower.
|
|
|
|
I've noticed some odd behaviour from this coin; my response to Cryptopia on 7/04 when their node seemed to ignore the world: Hi, I've noticed that you've attempted to re-sync Cryptopia's 66coin node - this is not possible from scratch purely using 0.8.2 code. It will get to 32,004 and complain about an invalid block. You need to synchronize using the 0.7.0 code (available at https://github.com/66maintainer/66coin), then once it hits block 580,000ish; you can switch to the 0.8.2 code which happily resyncs from there. Fairly easy operation; let me know if you need a hand. james Might be worth setting up a node on a VPS with -disablewallet flag (purely a sync node); as the node count is generally always low. james |
|
|
|
|
is implementing the getblocktemplate RPC call planned?
i love the nostalgia but getwork is ancient.
|
|
|
|
|
@signal7
seems like me and you are the only fans of this one,
shame its not billCLINTON coin (all the interns).
both avast and avg show no virii.
|
|
|
|
Please upload source code to Github.
Probably a dozen of coins paid to add in your exchange without results, several wallets with forks and swaps waiting for update (some for months I think), god knows how many unanswered private messages in the forum, in twitter and support tickets, an announcement thread full of complaints without any communication from you guys and what do you do... You show up with one short message in a thread for a complete joke of a coin with banned dev, no github, virus in wallet and god knows what else. This guy sums it up pretty nicely: Truly this is the lowest point ever in Crypto.
Source was released at start; albeit in .rar form which was only a minor hassle. Most wallets get picked up with generic virus/trojan warnings due to the inclusion of code capable of mining (even Bitcoin fell victim to this in the early days). To be honest it was a fair launch; I was able to find around 50 CLINT using prehistoric BFL SHA256 equipment. |
|
|
|
@welshy9 @rud3boy all fixed, i wouldnt doubt thats why they moved. someone tried to connect to the pool with username 'stratum+tcp://xxx' and i had username validation off; broke payments. *edit: payments sent..derp  |
|
|
|
hi all, pool available at http://bazco.inminimum payouts 0.1 CLINT payments processed every 30 seconds initial diff 512 (range 1-1048576) stratum at stratum+tcp://bazco.in:3333 username is your CLINT address password doesnt matter ie. cgminer -o stratum+tcp://bazco.in:3333 -u <clint address> -p xhave fun james Autopayout DISABLED!!! "paymentProcessing": {
"enabled": true,
"paymentInterval": 30,
"minimumPayment": 0.1,
begpardon? the last block on my pool was won 20 minutes ago, the hashrate has moved to tekyboys pool. scratch that, my bad.. i can see its pooled up, will send out shortly |
|
|
|
hi all, pool available at http://bazco.inminimum payouts 0.1 CLINT payments processed every 30 seconds initial diff 512 (range 1-1048576) stratum at stratum+tcp://bazco.in:3333 username is your CLINT address password doesnt matter ie. cgminer -o stratum+tcp://bazco.in:3333 -u <clint address> -p xhave fun james Autopayout DISABLED!!! "paymentProcessing": {
"enabled": true,
"paymentInterval": 30,
"minimumPayment": 0.1,
begpardon? the last block on my pool was won 20 minutes ago, the hashrate has moved to tekyboys pool. |
|
|
|
|
confirmed 452 blocks at bazco.in, at ~ 60Th
|
|
|
|
|
Show Posts
