Show Posts
|
Pages: [1]
|
4
|
Bitcoin / Hardware / Re: Antminer R4 Question
|
on: June 25, 2017, 10:16:50 PM
|
I have 10 of them since something like 5 months. 2 hashing boards are dead from 2 different R4 so I mixed the 2 remaining working boards to make 1 complete R4.
6 controller boards also dead from electrical shutdown. I purchased some replacement S9 controller boards from Bitmain, reflashed them with R4 firmware and it works good.
Last week we had high winds and small tornados (really rare here), some tree broke and then we had an electrical shutdown, and 2 more controller boards died. I had only 1 replacement boards in hands so I connected 1 hashing board on an other R4, and the other hashing board also to an other R4. Original wires are long enough without modification. So I have 2 controller boards that control each 3x R4 hashing boards. Works really good. You have to keep the broken controller board plugued for the fan so your hashing boards doesnt fry.
R4 are not reliable at all and it doesnt worth it to send them to warranty. But... we already made profit on them even with a lot of dead boards so we don't really care if they die now.
|
|
|
7
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: [Awesome Miner]- Powerful Windows GUI to manage and monitor up to 5000 miners
|
on: March 12, 2017, 10:36:00 PM
|
I havent tried the API access for S9. I gave it a try on one miner to test it and now the miner is showing Disconnected in the program. The miner is working good on the pool. Updated to 2.4
I tried different combinaisons of rules, it always says OK in the list but I can't get the miner reconnected to the program.
W:192.168.2.160 W:192.168.2.160,W:127.0.0.1 W:127.0.0.1/32 w:192.168.2.160 etc
What I'm doing wrong?
The second configuration looks best, as long as 192.168.2.160 is the IP of your Windows computer. Is that the case? Have you tried the setting in Awesome Miner to allow access to any computer, just to see if that option is working better? Thanks for the reply. I tought it was the miner IP and not the computer IP. It works now. Does it works with R4 and T9 ? Yes, Awesome Miner works fine with both Antminer R4 and T9. Thanks, it works perfect !
|
|
|
8
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: [Awesome Miner]- Powerful Windows GUI to manage and monitor up to 5000 miners
|
on: March 12, 2017, 09:39:05 PM
|
I havent tried the API access for S9. I gave it a try on one miner to test it and now the miner is showing Disconnected in the program. The miner is working good on the pool. Updated to 2.4
I tried different combinaisons of rules, it always says OK in the list but I can't get the miner reconnected to the program.
W:192.168.2.160 W:192.168.2.160,W:127.0.0.1 W:127.0.0.1/32 w:192.168.2.160 etc
What I'm doing wrong?
The second configuration looks best, as long as 192.168.2.160 is the IP of your Windows computer. Is that the case? Have you tried the setting in Awesome Miner to allow access to any computer, just to see if that option is working better? Thanks for the reply. I tought it was the miner IP and not the computer IP. It works now. Does it works with R4 and T9 ?
|
|
|
|