I've been mining for a couple days already i have about 10 D3s running at the moment and i can't cerrainly say how often it happens because i haven't been monitoring them long enough but they'll go into fault mode (red led blinking) if i check the status 1 or 2 hasboards will show xxxxxx after a while will come back to the normal status if anyone is mining right now are youe miners doing the same?
That could be also a fault PSU, try to switch PSU's from a working one to that one and try it again. I know thats what the troubleshooting says but i have 14 and they all do the same lol Mine just arreived and it's also doing the same... damnit!! Gonna open a support ticket |
|
|
|
I've been mining for a couple days already i have about 10 D3s running at the moment and i can't cerrainly say how often it happens because i haven't been monitoring them long enough but they'll go into fault mode (red led blinking) if i check the status 1 or 2 hasboards will show xxxxxx after a while will come back to the normal status if anyone is mining right now are youe miners doing the same?
That could be also a fault PSU, try to switch PSU's from a working one to that one and try it again. |
|
|
|
Same here. Over 4 hours and still not received. And you? So far you are lucky, friend of mine has $1000's stuck in limbo at Poloniex for the past 4 weeks ! If - and I really mean IF - you get your coins never deal with Poloniex again. Joining the "limbo team" I have around 3800USD stuck Opened 2 tickets, for 2 different scenes: 1) Deposited ETH to polo addr, got the TXID everything, never came thrhough, first reply, they mentioned they had issues with ETH deposits At the moment, 2nd reply, they closed the ticket telling it was resolved, of course I replied 2) Withdrew DGB, Complete:Error, Opened Ticket, and nothing whatsoever.... How is this even possible?! |
|
|
|
Hi Claymore,
I believe the voltage issues with 9.8 and the beta driver, are specific to the RX580 cards, from what I've read the RX480s are just fine with the beta driver.
Not true, 480s here, voltage control doesn't work at all on the new driver. on Afterburner, latest beta, try to set the voltage control in settings to thirdparty |
|
|
|
i try Claymore 9.8 -cclock -mclock, this is not stable, the memory suddenly drop to 1000mhz from 2200mhz , and then back to 2200 for few sec then back to 1000
I have the same behaviour in Claymore 9.8, also power is not stable. If not using -cclock -mclock I got stable 30.2MH/s for RX580 8GB and MSI Afterburned 4.4.0 beta 16 setup: mV 970 core 1150 memclock 2150 yes confirmed AB is work with this driver, i got stable 30MH at core 1150 and mem 2150 for sapphire nitro+ RX580 8GB anyone try this driver with 12+ GPU? How many watts are they pulling? i've got that same card and im getting 31.8 mh/s and 920 dcr at 2250 but problably consuming too much power, around 110 W on GPU-Z yes same as you 110W + 80W in HWiNFO64, and under voltage in AB is not work. anyone please help to under voltage for this driver. Check the first post, if you follow it correctly, it just works, I have 3 rigs , 1 with rx470's and 2 with rx570's , from different vendors, they all work with undervolting, and are using around 850W each at the wall |
|
|
|
|
Driver is legit,
Went from 161 to 174Mh/s on 6x RX470 8GB Samsungs
Used MSI AB also from the main post and setup a profile
1150/2100/910mv , 890W at the wall
|
|
|
|
Hey guys, is there any kind of block explorer for this?
How long does it usually take to transfer assets across the blockchain?
Googled it already, couldn't find absolutely no info on this
https://counterpartychain.io/asset/BITCRYSTALStransfer speed... not sure Thanks man, will wait for tomorrow  taking a looong time, 4 hours on pending |
|
|
|
there any hashrate/price calculator? i was search in google but i cand find. Or anybody can tell me 1080 daily reward?
I'd suggest you mine for 24h/48h and make an estimate, then plug in your wall meter and make the calcs. Hint: At the moment it's worth more than mining ETH (for rx470's at least) |
|
|
|
|
Hey guys, is there any kind of block explorer for this?
How long does it usually take to transfer assets across the blockchain?
Googled it already, couldn't find absolutely no info on this
|
|
|
|
Upvoted, Why not try to get on bittrex? It would be a boost! That is our goal... for a half year was that really easy to list a coin. What are the requirements to go on bittrex? i red their sheet about it, but didn't find anything that could block you guys! |
|
|
|
Upvoted, Why not try to get on bittrex? It would be a boost! |
|
|
|
|
Hey guys
Anyone else having issues connecting to europe.ethhash-hub.miningpoolhub.com:17020?
3 of my rigs are having issues (on different locations)
|
|
|
|
|
Hey guys,
I have an issue on your pool since yesterday on two different accounts.
I am mining Ethhash at the moment, but the balances don't change at the overall page, but when I go for example to the ethereum dashboard, I see the balances.
Can you please check? PM me if you need more info
|
|
|
|
Hello everyone. I have a problem with one of my rigs. I get the ""WATCHDOG: GPU 0 hangs in OpenCL call, exit" problem after about 20-60 min running the claymore miner. It started tough with that my miner was loosing internet connection after running a while. When i fixed that by installing new network adapter drivers, the connection was stable but the GPU´s started to give 0.00 mh´s after a while, until getting the error message. I did overclock the rig in the beggining, but i have reseted the MSI afterburner settings to default and i also did a bios mod, but i flashed the cards back to the original bios. I also dont think that the bios mod was the problem, because i have 3 more rigs with rx 470 with the same mod, and they all work great. Specs: Intel Celeron G1840 Processor Asrock H81 Pro BTC motherboard 6x AMD Radeon RX 470 4GB 4GB DDR3 Memory 60GB SDD Harddisk 1000W Gold power supply Windows 10 operating system
I have already tried to:- Run the miner with the gser and eser commands and have also tried both dual and solo mining(both have same problems). - fresh install of both operating system and Gpu drivers (first gpu drivers with DDU and after that operating system). - Checked every riser, but they all work on a diffrent system so thats not the problem. - Setting virtual memory to atleast 16000 - Tried old claymore miners, from 6.3 and up, same problem. I dont really know what to do at this point, would really appreciate help if someone knows what might be causing this.  Try to switch the card to another PCI Riser and see if the SAME card still crashes, if it does, it's probably a bad card, probably to abusive overclocking. If the other card crashes, it's probably a bad PCI-E Riser |
|
|
|
which pool is good for eth mining?
They are all about the same. Nano Pool and Ethermine are probably the best two to start. Over time you get paid virtually the same from the different pools if the fees are the same. I believe Nano Pool and Ethermine both charge 1%. thanks alot bro I've been on ethermine, and yeah, it's okay, but i've moved to miningpoolhub.com , they have auto coin switch based on profitability, and also, a 0.9% fee P.S.: And auto exchange to the coin you prefer |
|
|
|
How do I know if the devfell is being mined in the poll I'm using?
miningpoolhub.com
If you notice the logs, it will temporarily switch to us1.ethermine.org or something when it's mining the devfee |
|
|
|
|
@Claymore
For some reason, using 9.4, I cannot mine SC on miningpoolhub anymore, keeps disconnecting, am I missing something here?
Heres ie my command, works in 9.1-3, not on 9.4: EthDcrMiner64.exe -r 1 -asm 1 -dcri 17 -retrydelay 5 -epool europe.ethash-hub.miningpoolhub.com:17020 -esm 2 -ewal tperalta82.TheRig -epsw x -eworker tperalta82.TheRig -dpool stratum+tcp://hub.miningpoolhub.com:20550 -dwal tperalta82.TheRig -dpsw x -dcoin sc -allpools 1 -allcoins 1
|
|
|
|
Hahahahha good point  |
|
|
|
|
Show Posts
