Lol very knowledgeable for someone who doesn't even own the bot. Thanks though I investigate everything I can before making a move  |
|
|
|
|
Wow Gunthar, awesome values you have there!!!
Are you running the default PureBB Settings? 25/25 ?
That makes me consider buy the bot actually and make some investment!
|
|
|
|
DCR vs PASC. Which one earns more money dual mining or is it a toss up?
With DCR you will actualy much more profit now. Due to PPLNS does it take a day or two to see the real profit? I started earlier today and so far earning have been very low. Much lower than I would have made mining PASC. I am hoping after 24 hours what I make per block will go up. I am mining DCR on coinmine.pl. Well you can go to whattomine and make the calcs there, pretty accurate. Right now I am making around 1.6 DCR per week, which is not bad.. |
|
|
|
I am having trouble with two of my ASUS strix rx 480s. They keep crashing my computer and I keep on lowering the mem clock but they still are crashing. I have another rx 480 that is at 2250 MHz but the ASUS strix rx 480s are around 2000mhz and I don't know how long that will last. Also, what memory overclock do you guys do. By the way, my cards don't have bios mods. Also I am running the latest claymore with crimson 12.12.2.
I feel like we all are stealing claymore's thread here, but anyway, isn't 2250 too much ? What's your card's memory vendor? You should check other threads for bios mods for your card, like memory straps and whatnot, you can probably go here: https://forum.ethereum.org/discussion/9650/sapphire-rx-480-nitro-oc-8gb-11260-01-20g-modded-bios-29-mh-downvoltIt's for a sapphire, but you can get your data/tutorials from there, i'd recommend you to make your custom bios carefully , instead of just "braindead" flashing others's. For instance, I have 6 rx 470, that haven't worked with anyone elses's bioses but mine so... you get the idea, just read read read, study, and mod it. Also for the drivers, go for 16.11.5, as 16.12 will not let you biosmod, unless you modify the drivers You won't go far without biosmod |
|
|
|
hi guys, have bigg problem, I tried everything to solve problem and noting, have 6x rx480 8gb asus dual(mod bios), use claymore 9.2, driver 16.10.2, have bigg fluctuation, try to change drivers, try to change overcloak, try to change -ethi and -dcri, and same problem GPU activite all time 100% - 0%, and mh/s 30mh/s to 5mh/s ...... plz some help or any idea for this problem .. ??  - do not undervolt - use asm -0 - use ddu to uninstall the driver - install 16.11.5 I know you mean well but are offering poor advice. I undervolt, I underclock, I use -asm 1 and I don't have this kind of issues. For dual mining, try a DCRI of 24/25, for eth only, i'm using DCRI 4, haven't touched ethi, 6xRX470, stable 171/172 MH/s ETH and 4300 DCR., with asm 1 (default) With high undervolting and underclocking (4 of my cards are running at 920mV) And I'm having not many fluctuations, just lost some MH/s from the previous version. Try to review your settings and drivers, something is wrong there |
|
|
|
Ethermine is not working for me for the past hour or so.
Claymore can not resolve any of the servers.
Ethpool, which is a sister site, works fine.
Anyone else encountered a similar issue?
Working fine here, which endpoint are you using? GPU0 t=55C fan=84%, GPU1 t=55C fan=84%, GPU2 t=54C fan=84%, GPU3 t=51C fan=80%, GPU4 t=58C fan=84%, GPU5 t=57C fan=84% ETH: 04/27/17-21:26:54 - New job from eu1.ethermine.org:14444 ETH - Total Speed: 172.047 Mh/s, Total Shares: 6671, Rejected: 2, Time: 44:38 ETH: GPU0 28.702 Mh/s, GPU1 28.645 Mh/s, GPU2 28.700 Mh/s, GPU3 28.687 Mh/s, GPU4 28.656 Mh/s, GPU5 28.656 Mh/s DCR - Total Speed: 4301.177 Mh/s, Total Shares: 8546, Rejected: 66 DCR: GPU0 717.560 Mh/s, GPU1 716.130 Mh/s, GPU2 717.512 Mh/s, GPU3 717.164 Mh/s, GPU4 716.401 Mh/s, GPU5 716.410 Mh/s |
|
|
|
|
Started mining there now, seems kind of buggy.
For examplemy hashrate has a huge discrepancy from the one reported by the miner, but okay "I can live with that",
I've checked other miners, and there's one with 4.2~GH/s, with no payouts, so it seems the payout system is not working yet? Or just not reported?
|
|
|
|
With Claymore 9.2 I had not trouble for like 72 hours with dualmining ETH/DCR Now this starts to appear more and more often :/ (Already had this in 9.1 and 9.0 I think)  Can you check your logs for any kind of opencl hang or something? |
|
|
|
Claymore only display GPU temperatur for GPU 0. I want to see or log temperature for all GPU
How to do so?
Do you have crossfire activated? Make sure you are NOT using RDP, use teamviewer instead for example Why not use RDP? Because bugs exist! It's in the readme , make sure you read it: It seems RDP uses a virtual display adapter that makes claymore only detect one card for the temp readings " I see only one card via Remote Desktop Connection. It's a problem of RDC, use TeamViewer or some other remote access software. " -> From the readme I see all cards and all cards are mining great. Only Claymore show temperature of first GPU0 only. GPUZ, OpenHWmonitor.. read correct info from all cards. When using VNC I would need to manualy configure resolution, default with no display connected is 640x480. That's why I used RDP where you set resolution only once. On VNC you have to set it each reboot. Yes I know, they mine great, everything works just fine, only the temps will come for the first card. Like I said, just use teamviewer, it just works, VNC is veeery slow |
|
|
|
Claymore only display GPU temperatur for GPU 0. I want to see or log temperature for all GPU
How to do so?
Do you have crossfire activated? Make sure you are NOT using RDP, use teamviewer instead for example Why not use RDP? Because bugs exist! It's in the readme , make sure you read it: It seems RDP uses a virtual display adapter that makes claymore only detect one card for the temp readings " I see only one card via Remote Desktop Connection. It's a problem of RDC, use TeamViewer or some other remote access software. " -> From the readme |
|
|
|
Claymore only display GPU temperatur for GPU 0. I want to see or log temperature for all GPU
How to do so?
Do you have crossfire activated? Make sure you are NOT using RDP, use teamviewer instead for example |
|
|
|
Hi Guys, this is my first post here on bitcointalk.
I have been using claymore 8.1 for a while now, on a rig with 6x RX470 with modded bios, and was getting around 169Mh/s stable.
with claymore 9.0... this is awkward, i can't seem to get more than 44Mh/s, tried dcri from 1 to 40, no changes whatsoever
Increased ethi to 16, same thing.. nothing changes.
Am I doing something wrong here?
You didn't mention your rig stats, such as PSU, OS, your command line etc. so I'll take a WAG at it. Version 9 draws slightly more power than 8.1. so I would suggest using the -li command line option. If the rig runs better at something like -li 5 you can toy with that to get the best speed you can........and know your PSU isn't enough now. Other than that, I got nothing for ya. Thanks a lot for your input, I fixed it, anyway, the rig stats are 2xEVGA 750W PSU's, 1 for each of the 3 cards, and one also has the mobo, 6x RX470 Nitro+ bios modded (didn't push too much, they were making 28.1/2 mh/s stable for weeks now, only ETH The problem was that i hit the stuck 300Mhz GPU Bug for some reason, DDU + 16.11.5 drivers (the last ones that accept modded bioses) Re-tested, and now using -dcri 4, and doing around 171MH/s total ETH - Total Speed: 171.024 Mh/s, Total Shares: 17, Rejected: 0, Time: 00:07 ETH: GPU0 28.469 Mh/s, GPU1 28.524 Mh/s, GPU2 28.508 Mh/s, GPU3 28.502 Mh/s, GPU4 28.491 Mh/s, GPU5 28.530 Mh/s ETH: 04/07/17-03:45:37 - New job from eu1.ethermine.org:4444 ETH - Total Speed: 171.077 Mh/s, Total Shares: 17, Rejected: 0, Time: 00:08 ETH: GPU0 28.446 Mh/s, GPU1 28.532 Mh/s, GPU2 28.512 Mh/s, GPU3 28.515 Mh/s, GPU4 28.542 Mh/s, GPU5 28.530 Mh/s ETH: 04/07/17-03:45:39 - New job from eu1.ethermine.org:4444 ETH - Total Speed: 171.071 Mh/s, Total Shares: 17, Rejected: 0, Time: 00:08 ETH: GPU0 28.450 Mh/s, GPU1 28.550 Mh/s, GPU2 28.530 Mh/s, GPU3 28.516 Mh/s, GPU4 28.509 Mh/s, GPU5 28.515 Mh/s I Noticed this because when I went back to Claymore 8.1, it was slow as hell, so... checked the monitors/sensors, and almost slit my wrists, stupid driver bugs that shouldn't even exist! P.S.: this is my cmdline : EthDcrMiner64.exe -dcri 4 -cclock 1150 -mclock 2050 -retrydelay 5 -tt -85,-85,-85,-85,-85,-85 -epool eu1.ethermine.org:4444 -ewal 0x31158768c36b20d84cE69354E52c25490ED4282e.Rig1 -epsw x -mode 1 |
|
|
|
|
Hi Guys, this is my first post here on bitcointalk.
I have been using claymore 8.1 for a while now, on a rig with 6x RX470 with modded bios, and was getting around 169Mh/s stable.
with claymore 9.0... this is awkward, i can't seem to get more than 44Mh/s, tried dcri from 1 to 40, no changes whatsoever
Increased ethi to 16, same thing.. nothing changes.
Am I doing something wrong here?
|
|
|
|
|
Show Posts
