Hello, I am creating my own CryptoCurrency called KaChingCoin. Source code, github.com/cryptocoindude/KaChingCoin. I have compiled the wallet in a linux terminal on 2 machines, one a vm inside of the other. I am using the -connect=192.168.1.* command to get them to see each other, but when I type in getinfo, it shows 0 connections. What am I doing wrong? I am offering a 0.01 BTC reward. If the reply is quick, I will do a 0.02 BTC reward! Thanks! Use pc with normal stable ip,not the local one.
|
|
|
Hi everyone) I am trying to install dns seeder for bitcoin and zazcoin(it will be intouduced tomorrow). So in example of bitcoin,I want to understand how can I setup on my VPS,a dns seeder. I know the difference between Node and Seeder,and it works,but I don;t know how to setup it. Here what I found. https://github.com/pooler/dnsseedhttps://github.com/sipa/bitcoin-seeder1)Is it better to take pooler/dnsseed for creating dns seeder for zazcoin(cause It has got another ports,magic bytes) 2)Can anybody give me an example how can I setup one of them(seeders) on digitalocean vps(maybe It can be easier there) Thank you in advance! bump
|
|
|
So,if I put it in the source code,I can to write "nodes ip" into the source.(ip that I write in /datadir/bitcoin/bitcoin.conf) ?
|
|
|
Если есть желающие протестировать (желательно имеющие ботов), пишите свои IM контакты в ЛС.
Какие вам боты нужны и для чего?
|
|
|
Hi) I want to know,how can I use a Ip of node,but not just DNSSeed link. According to this thread https://bitcointalk.org/index.php?topic=290308.0,I have to change parameters from this vPeerGroup.addPeerDiscovery(new SeedPeers(params));
to this vPeerGroup.addPeerDiscovery(new DnsDiscovery(params));
It's ok,but I can't find in source code,where I should write IP addresses of nodes(ex.54.xxx.xxx.33:55884,or without ,just 54.xxx.xxx.33) And I want to repeat,I want to use Nodes,not DNSSeeders. Thank you to all in advance!
|
|
|
Hi everyone) I am trying to install dns seeder for bitcoin and zazcoin(it will be intouduced tomorrow). So in example of bitcoin,I want to understand how can I setup on my VPS,a dns seeder. I know the difference between Node and Seeder,and it works,but I don;t know how to setup it. Here what I found. https://github.com/pooler/dnsseedhttps://github.com/sipa/bitcoin-seeder1)Is it better to take pooler/dnsseed for creating dns seeder for zazcoin(cause It has got another ports,magic bytes) 2)Can anybody give me an example how can I setup one of them(seeders) on digitalocean vps(maybe It can be easier there) Thank you in advance!
|
|
|
Obmen.PM - Сертифицированный партнер платежной системы PerfectMoney.
Наш сайт https://obmen.pmНаши преимущества:- Автоматический, мгновенный ввод/вывод через систему Приват24, ввод и вывод средств осуществляется в течении 3-х минут после оформления и оплаты Вами заявки. Это новшество по достоинству оценят те клиенты, которым наряду с низкой комиссией, необходима быстрота получения средств на свой счет.
- Продажа электронных валют посредством VISA, MasterCard, Western Union, Liqpay
- При обмене сумм более 100, 1000 и 5000 долл. в эквиваленте вы получаете оптовую скидку
Только у нас вы можете купить PerfectMoney по "Акции" с доплатой (следите за новостями на форуме и на сайте) - Партнерская программа для владельцев сайтов
- Самые выгодные курсы валют на онлайн-обмены в сети интернет
Все курсы обмена, а также Файл экспорта курсов валют доступны на нашем сайте в разделе: Актуальные курсы обмена_____________________________ Уважаемые клиенты, мы добавили в обменный пункт новые ел.валюты (Bitcoin и BTC-E Code), которые будут доступны во всех направлениях обмена. Обмены в направлениях Bitcoin и BTC-E Code работают в автоматическом режиме Покупка (Ввод): Bitcoin и BTC-E Code только у нас можно купить всего за 0%Продажа (Вывод):Bitcoin и BTC-E Code от 1% до 5%_____________________________ Контакты (указаны на сайте): ICQ: 669-088-483Форма обратной связиПротестируем Вас.)
|
|
|
Sorry, this is a business, making it an open source is no more a business. And for people depositing into the wallet well, sorry to disappoint, we have had some deposits and some merchants using the system to sell their goods. I believe is a matter of time, before we earn the full trust of the bitcoin and litecoin community as it is in every new business.
As I said,your business woun't start,if you don't make it open source
|
|
|
Hi. I am trying to build my altcoin just to test it,for run. I just forked Infinitecoin. I deleted all DNSeeds in net.cpp. But when I run the altcoin-qt,wallet, I see that synchronisation starts to working,and that in y DATADIR some peers.dat file. How can I remove in source code,the creating of this peers.dat. Thank you
SO,how can I remove the creating of peers.dat in source code of my altcoin. Thanks
|
|
|
But I get this error. I tried to fix it,but couldn't/ src/main.cpp: In function 'bool InitBlockIndex()' src/main.php 2903:95: error scrypt_1024_1_1_256_sp_generic was now declared in this scope/ Makefile.Release:1163: recipe for targer 'build/main.o' failed
|
|
|
Hi. I want to create one coin for personal usage,and I am taking Franko coin,as a source. Can somebody tell me ,how can I mine the genesis block,what should I change,if I have got such code? block.nTime = 1393188908; //Your time zone: 5/9/2013 block.nBits = 0x1e0ffff0; block.nNonce = 731837;
if (fTestNet) { block.nTime = 1393188907;// 7357 TEST block.nNonce = 385607496; }
//// debug print uint256 hash = block.GetHash(); printf("%s\n", hash.ToString().c_str()); printf("%s\n", hashGenesisBlock.ToString().c_str()); printf("%s\n", block.hashMerkleRoot.ToString().c_str()); assert(block.hashMerkleRoot == uint256("0xb78f79f1d10029cc45ed3d5a1db7bd423d4ee170c03baf110a62565d16a21dca")); block.print(); assert(hash == hashGenesisBlock);
// Start new block file try { unsigned int nBlockSize = ::GetSerializeSize(block, SER_DISK, CLIENT_VERSION); CDiskBlockPos blockPos; CValidationState state; if (!FindBlockPos(state, blockPos, nBlockSize+8, 0, block.nTime)) return error("LoadBlockIndex() : FindBlockPos failed"); if (!block.WriteToDisk(blockPos)) return error("LoadBlockIndex() : writing genesis block to disk failed"); if (!block.AddToBlockIndex(state, blockPos)) return error("LoadBlockIndex() : genesis block not accepted"); } catch(std::runtime_error &e) { return error("LoadBlockIndex() : failed to initialize block database: %s", e.what()); } }
return true; }
void PrintBlockTree()
|
|
|
Hi. I am trying to build my altcoin just to test it,for run. I just forked Infinitecoin. I deleted all DNSeeds in net.cpp. But when I run the altcoin-qt,wallet, I see that synchronisation starts to working,and that in y DATADIR some peers.dat file. How can I remove in source code,the creating of this peers.dat. Thank you
Can anybody help me?
|
|
|
There is more to the creation of an alt coin than just removing some DNSseeds. Port must be changed, magic bytes, new genesis block etc.
Sure everything that you listed,was changed. I said you,that I do it for run. I have been creating a lot of altcoins. But I have got with Infinitecoin source,cause I don;t know how to remove peers.dat file
|
|
|
Hi. I am trying to build my altcoin just to test it,for run. I just forked Infinitecoin. I deleted all DNSeeds in net.cpp. But when I run the altcoin-qt,wallet, I see that synchronisation starts to working,and that in y DATADIR some peers.dat file. How can I remove in source code,the creating of this peers.dat. Thank you
|
|
|
Now all working big Thanks But i got a exit bug from wallet-qt anybody know to fix it ? Rest working fine there is only one other bug console command = "help" instand crash with same error msg others commands working fine. Source used > litecoin Error Msg : This application has requested the runtime to terminate it in an unusual way. I have got the same problem. Phelix,help us with it.
|
|
|
Have you got SHA-256 android wallet.? Because all list of your projects is SCRYPT coins.
SHA-256 coins are possible also, the only difference is one line of code. Even scrypt coins use the double SHA-256 for the hash values of blocks, transactions and merkle-roots. If it is possible,create please Litecoin android wallet. Thank you.
|
|
|
Have you got SHA-256 android wallet.? Because all list of your projects is SCRYPT coins.
SHA-256 coins are possible also, the only difference is one line of code. Even scrypt coins use the double SHA-256 for the hash values of blocks, transactions and merkle-roots. Are there any other sha-256 wallets I can look at? Any alt coins have one? No.But you can make it by changing one line in the code.I will post it later
|
|
|
|