bgibso01
Legendary
Offline
Activity: 1218
Merit: 1001
|
|
July 12, 2015, 01:51:33 AM |
|
Easiest approach would be to direct ethernet to your laptop/computer. Switch laptop/computer to same network and then web into the dragon and change in the gui to what network you want.
|
|
|
|
pielbeer
Newbie
Offline
Activity: 4
Merit: 0
|
|
July 12, 2015, 10:40:51 AM |
|
hi there,
is there any image with an ip adress like 192.168.2.xxx or how can i change that in an existing image before i put it on a sd card
I think you could change it if you mount in linux, I have not tried it to see if it works. But you would be able to edit the file. Easiest would set computer or 2nd router to IP range log into miner and change it. Make sure to make a backup of your SD card before doing it. But that is a odd IP range doubt anyone has a image ready for it. how would i do this with a computer, my isp wont let me change my range it is 192.168.2.xxx can change it
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
July 12, 2015, 11:07:29 AM |
|
hi there,
is there any image with an ip adress like 192.168.2.xxx or how can i change that in an existing image before i put it on a sd card
I think you could change it if you mount in linux, I have not tried it to see if it works. But you would be able to edit the file. Easiest would set computer or 2nd router to IP range log into miner and change it. Make sure to make a backup of your SD card before doing it. But that is a odd IP range doubt anyone has a image ready for it. how would i do this with a computer, my isp wont let me change my range it is 192.168.2.xxx can change it You might call up ISP tell them the router is causing troubles and you want "bridged" mode. This allows you to have your router instead of their all in one. But plug ethernet cable from dragon into computer's ethernet. Configure them on same IP range. Then go to machine and change it to proper settings. Make sure to make a backup of your SD card before trying any of this.
|
|
|
|
pielbeer
Newbie
Offline
Activity: 4
Merit: 0
|
|
July 14, 2015, 03:38:55 PM |
|
al sorted out, thx for the help.
one last question, I can set the difficulty in thr gui of the miner, what does it need to be for example f2 pool. if i look at my dashboard at f2 it does not reach 1 th/s
greetings
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
July 14, 2015, 09:06:20 PM |
|
al sorted out, thx for the help.
one last question, I can set the difficulty in thr gui of the miner, what does it need to be for example f2 pool. if i look at my dashboard at f2 it does not reach 1 th/s
greetings
It does not matter what you set it to for most pools. It will automatically pick difficulty based on your speed connected to pool. So yea set it to 256 or something. But you will be fine it does not matter. Also might look into antpool it has PPS at 2.5 percent vs f2pool 4 percent.
|
|
|
|
pekatete
|
|
July 14, 2015, 09:14:24 PM |
|
al sorted out, thx for the help.
one last question, I can set the difficulty in thr gui of the miner, what does it need to be for example f2 pool. if i look at my dashboard at f2 it does not reach 1 th/s
greetings
Set it to at least half the speed that you've seen it hash (or what it is rated to hash) to be on the safe side, i.e if you see 1Th/s, set it at 512 and the pool will take it from there; that way you avoid the classic S2 syndrome!
|
|
|
|
pielbeer
Newbie
Offline
Activity: 4
Merit: 0
|
|
July 15, 2015, 03:31:59 PM |
|
al sorted out, thx for the help.
one last question, I can set the difficulty in thr gui of the miner, what does it need to be for example f2 pool. if i look at my dashboard at f2 it does not reach 1 th/s
greetings
Set it to at least half the speed that you've seen it hash (or what it is rated to hash) to be on the safe side, i.e if you see 1Th/s, set it at 512 and the pool will take it from there; that way you avoid the classic S2 syndrome! thx for the reply all off you, s2 syndrome what is that
|
|
|
|
pekatete
|
|
July 15, 2015, 03:49:12 PM |
|
thx for the reply all off you, s2 syndrome what is that
If the diff is set low, then the software on the rig may get into a loop (for lack of a better word) trying to submit so many shares in a very short space of time that it crashes the rig before the pool has a chance of adjusting share diff. I personally always set my rigs' diffs higher than their rated speed (as I know the pools I mine on will lower / set it appropriately after a while).
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
July 15, 2015, 07:34:37 PM |
|
thx for the reply all off you, s2 syndrome what is that
If the diff is set low, then the software on the rig may get into a loop (for lack of a better word) trying to submit so many shares in a very short space of time that it crashes the rig before the pool has a chance of adjusting share diff. I personally always set my rigs' diffs higher than their rated speed (as I know the pools I mine on will lower / set it appropriately after a while). I have used the dragon 1T and 1.5T. Really 256-512 it does not make much of a difference. Once you connect to a decent pool it automatically adjusts the difficulty. The dragons are pretty much set and forget if using a good pool. They seem to have a very long lifespan (minus the PSU's used in them).
|
|
|
|
pekatete
|
|
July 15, 2015, 08:29:24 PM |
|
^^^^ And that is the plague of signature campaigns striking .... basically nothing to add to (not even negate) what has already been said.
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
July 15, 2015, 08:36:30 PM |
|
^^^^ And that is the plague of signature campaigns striking .... basically nothing to add to (not even negate) what has already been said.
I appolgize if it was worded wrong. I have used many dragon 1t A1's and not experienced the "s2 syndrom". I was negating that setting a 1T dragon to 512 really making much of a difference. I believe the default is 256, and it has no issues at this. So I was meaning to negate your statement of 1T dragons having as you call it "s2 syndrom" Hopefully that clears it up. Pekatete have you owned a Dragon 1T?
|
|
|
|
|