mpradeep (OP)
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 86
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 06, 2013, 02:04:19 PM |
|
I have OC Gigabyte 3 fan 2GB 7970 GFX card.
How do i under volt it. As of now i am running it at 1140MHz core clock and 685Mhz mem clock. How to reduce the core voltage to less than 1170mv??
I have tried in CG miner but it didnt work. I am a bit naive to this like some one to explain in detail on how to undervolt my card?
Thanks Pradeep
|
|
|
|
KWH
Legendary
Offline
Activity: 1904
Merit: 1045
In Collateral I Trust.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 06, 2013, 02:21:24 PM |
|
I have OC Gigabyte 3 fan 2GB 7970 GFX card.
How do i under volt it. As of now i am running it at 1140MHz core clock and 685Mhz mem clock. How to reduce the core voltage to less than 1170mv??
I have tried in CG miner but it didnt work. I am a bit naive to this like some one to explain in detail on how to undervolt my card?
Thanks Pradeep
https://www.sapphireselectclub.com/ssc/TriXX/TriXX.aspx
|
When the subject of buying BTC with Paypal comes up, I often remember this:
Insanity: doing the same thing over and over again and expecting different results.
Albert Einstein
|
|
|
crazyates
Legendary
Offline
Activity: 952
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 06, 2013, 02:54:26 PM |
|
Ugh I hate Trixx. I (and a lot of other people on here) use MSI AB. Set unofficcial overclocking = 2, force constant voltage, and undervolt. That's what I do with my Gigabyte 7970.
|
|
|
|
tacotime
Legendary
Offline
Activity: 1484
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 06, 2013, 04:42:34 PM |
|
see thread in my sig, it unlocks voltage too
|
XMR: 44GBHzv6ZyQdJkjqZje6KLZ3xSyN1hBSFAnLP6EAqJtCRVzMzZmeXTC2AHKDS9aEDTRKmo6a6o9r9j86pYfhCWDkKjbtcns
|
|
|
mpradeep (OP)
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 86
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 06, 2013, 08:04:58 PM |
|
tacotime,
i cannot download the dll file says file doesnt exist can you please reupload
|
|
|
|
|
Unacceptable
Legendary
Offline
Activity: 2212
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 06, 2013, 10:00:34 PM |
|
Ugh I hate Trixx. I (and a lot of other people on here) use MSI AB. Set unofficcial overclocking = 2, force constant voltage, and undervolt. That's what I do with my Gigabyte 7970.
Just copy & paste this in your config: [ATIADLHAL] EnableUnofficialOverclocking = 1 UnofficialOverclockingEULA = I confirm that I am aware of unofficial overclocking limitations and fully understand that MSI will not provide me any support on it UnofficialOverclockingMode = 2 AccessibilityCheckingPeriod = 0 This has the same effect.....I think ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
"If you run into an asshole in the morning, you ran into an asshole. If you run into assholes all day long, you are the asshole." -Raylan Givens Got GOXXED ?? https://www.youtube.com/watch?v=9KiqRpPiJAU&feature=youtu.be"An ASIC being late is perfectly normal, predictable, and legal..."Hashfast & BFL slogan ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
vdragon
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 07, 2013, 12:44:20 AM |
|
First of all, when did you buy the card? Older gigabytes had the ability to change voltage, newer don't. I have a few of both. Newer run on 1.170V, and could do 1150 smoothly, but you have the keep the room cool. And install GPU-Z to be sure Afterburner is not lieing to you ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) . Always double check
|
|
|
|
crashoveride54902
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 07, 2013, 02:29:45 AM |
|
hmm I tryed this and i did get my mem clock down to 685 but then closed and restarted, slider bar still down to min..then i upgraded my msi afterburner to lastest version...could lower mem clock down to 345 but on the readout is still says 685 ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
Dreams of cyprto solving everything is slowly slipping away...Replaced by scams/hacks ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
crazyates
Legendary
Offline
Activity: 952
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 07, 2013, 02:32:46 AM |
|
First of all, when did you buy the card? Older gigabytes had the ability to change voltage, newer don't. I have a few of both. Newer run on 1.170V, and could do 1150 smoothly, but you have the keep the room cool. And install GPU-Z to be sure Afterburner is not lieing to you ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) . Always double check I have an older one, the model that was factory OC'd to 1100MHz, but I could push it to 1200MHz no problem. However, that factory OC also came with a factory 1.25V, so undervolting makes a huge diff on my card. Mine didn't work until I set the "Force constant voltage" option. I don't know about the newer cards, so you're prolly right.
|
|
|
|
scifimike12
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 07, 2013, 02:41:05 AM |
|
hmm I tryed this and i did get my mem clock down to 685 but then closed and restarted, slider bar still down to min..then i upgraded my msi afterburner to lastest version...could lower mem clock down to 345 but on the readout is still says 685 ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Try EnableUnofficialOverclocking = 2 instead of 1.
|
|
|
|
crashoveride54902
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 08, 2013, 12:18:47 AM |
|
hmm I tryed this and i did get my mem clock down to 685 but then closed and restarted, slider bar still down to min..then i upgraded my msi afterburner to lastest version...could lower mem clock down to 345 but on the readout is still says 685 ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Try EnableUnofficialOverclocking = 2 instead of 1. tryed that and now my slider won't go below 685 now ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
Dreams of cyprto solving everything is slowly slipping away...Replaced by scams/hacks ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
crazyates
Legendary
Offline
Activity: 952
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 08, 2013, 01:43:58 AM |
|
hmm I tryed this and i did get my mem clock down to 685 but then closed and restarted, slider bar still down to min..then i upgraded my msi afterburner to lastest version...could lower mem clock down to 345 but on the readout is still says 685 ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Try EnableUnofficialOverclocking = 2 instead of 1. tryed that and now my slider won't go below 685 now ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Go into the MSI AB folder, and delete the files in the "Profiles" folder.
|
|
|
|
crashoveride54902
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 08, 2013, 02:26:44 AM |
|
hmm I tryed this and i did get my mem clock down to 685 but then closed and restarted, slider bar still down to min..then i upgraded my msi afterburner to lastest version...could lower mem clock down to 345 but on the readout is still says 685 ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Try EnableUnofficialOverclocking = 2 instead of 1. tryed that and now my slider won't go below 685 now ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Go into the MSI AB folder, and delete the files in the "Profiles" folder. ahh ty much it worked
|
Dreams of cyprto solving everything is slowly slipping away...Replaced by scams/hacks ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
|