How to under volt 7970

[mpradeep]

I have OC Gigabyte 3 fan 2GB 7970 GFX card.

How do i under volt it. As of now i am running it at 1140MHz core clock and 685Mhz mem clock. How to reduce the core voltage to less than 1170mv??

I have tried in CG miner but it didnt work. I am a bit naive to this like some one to explain in detail on how to undervolt my card?

Thanks
Pradeep

[1714802415]

1714802415

[1714802415]

1714802415

[1714802415]

1714802415

[KWH]

I have OC Gigabyte 3 fan 2GB 7970 GFX card.

How do i under volt it. As of now i am running it at 1140MHz core clock and 685Mhz mem clock. How to reduce the core voltage to less than 1170mv??

I have tried in CG miner but it didnt work. I am a bit naive to this like some one to explain in detail on how to undervolt my card?

Thanks
Pradeep

https://www.sapphireselectclub.com/ssc/TriXX/TriXX.aspx

[crazyates]

Ugh I hate Trixx. I (and a lot of other people on here) use MSI AB. Set unofficcial overclocking = 2, force constant voltage, and undervolt. That's what I do with my Gigabyte 7970.

[tacotime]

see thread in my sig, it unlocks voltage too

[mpradeep]

tacotime,

i cannot download the dll file says file doesnt exist
can you please reupload

[scifimike12]

tacotime,

i cannot download the dll file says file doesnt exist
can you please reupload

http://www.sendspace.com/file/un5iyx

(source)

[Unacceptable]

Ugh I hate Trixx. I (and a lot of other people on here) use MSI AB. Set unofficcial overclocking = 2, force constant voltage, and undervolt. That's what I do with my Gigabyte 7970.

Just copy & paste this in your config:

[ATIADLHAL]
EnableUnofficialOverclocking   = 1
UnofficialOverclockingEULA   = I confirm that I am aware of unofficial overclocking limitations and fully understand that MSI will not provide me any support on it
UnofficialOverclockingMode   = 2
AccessibilityCheckingPeriod   = 0

This has the same effect.....I think 

[vdragon]

First of all, when did you buy the card? Older gigabytes had the ability to change voltage, newer don't.  I have a few of both. Newer run on 1.170V, and could do 1150 smoothly, but you have the keep the room cool. And install GPU-Z to be sure Afterburner is not lieing to you . Always double check

[crashoveride54902]

hmm I tryed this and i did get my mem clock down to 685 but then closed and restarted, slider bar still down to min..then i upgraded my msi afterburner to lastest version...could lower mem clock down to 345 but on the readout is still says 685

[crazyates]

First of all, when did you buy the card? Older gigabytes had the ability to change voltage, newer don't.  I have a few of both. Newer run on 1.170V, and could do 1150 smoothly, but you have the keep the room cool. And install GPU-Z to be sure Afterburner is not lieing to you . Always double check

I have an older one, the model that was factory OC'd to 1100MHz, but I could push it to 1200MHz no problem. However, that factory OC also came with a factory 1.25V, so undervolting makes a huge diff on my card. Mine didn't work until I set the "Force constant voltage" option.

I don't know about the newer cards, so you're prolly right.

[scifimike12]

hmm I tryed this and i did get my mem clock down to 685 but then closed and restarted, slider bar still down to min..then i upgraded my msi afterburner to lastest version...could lower mem clock down to 345 but on the readout is still says 685

Try EnableUnofficialOverclocking = 2 instead of 1.

[crashoveride54902]

hmm I tryed this and i did get my mem clock down to 685 but then closed and restarted, slider bar still down to min..then i upgraded my msi afterburner to lastest version...could lower mem clock down to 345 but on the readout is still says 685

Try EnableUnofficialOverclocking = 2 instead of 1.

tryed that and now my slider won't go below 685 now

[crazyates]

hmm I tryed this and i did get my mem clock down to 685 but then closed and restarted, slider bar still down to min..then i upgraded my msi afterburner to lastest version...could lower mem clock down to 345 but on the readout is still says 685

Try EnableUnofficialOverclocking = 2 instead of 1.

tryed that and now my slider won't go below 685 now

Go into the MSI AB folder, and delete the files in the "Profiles" folder.

[crashoveride54902]

hmm I tryed this and i did get my mem clock down to 685 but then closed and restarted, slider bar still down to min..then i upgraded my msi afterburner to lastest version...could lower mem clock down to 345 but on the readout is still says 685

Try EnableUnofficialOverclocking = 2 instead of 1.

tryed that and now my slider won't go below 685 now

Go into the MSI AB folder, and delete the files in the "Profiles" folder.

ahh ty much it worked