I am new to mining and just recently purchased 2 antminer s7's and want to get them up and running. I am using 1 off brand PSU for each miner and they are rated at 220V. Because I live in an apartment I can't have an electrician set up a 240 circuit for my miners. Although I do have a 10-30R 30 amp 125/250V dryer outlet on its own circuit that I would be able to use (30 amp and 250V should support 2 s7 miners). I have been looking into ways to convert the 10-30R outlet using adapters so that I can plug in my PSU's for the miners. If anyone has any good suggestions on how to do this please comment.
My current option that I am considering is the following:
From the 10-30R wall outlet plug in a L6-30 converter, shown in the link below:
https://www.bsaelectronics.com/products/adapter-3-30amp-10-30-plug-to-l6-30-socket-adapter-5ftFrom the now L6-30 female end of that adapter I would plug in a L6-30 Plug to 2 Way IEC 60320 C13 Connector, shown in the link below:
https://www.stayonline.com/detail.aspx?id=31859&gclid=Cj0KCQiA38jRBRCQARIsACEqIes04F6GVk0QNRTIGBA9XqlV46fxOPUGgrxAKqy3JAfA_EhgbMYW6JIaAnxBEALw_wcBFrom there I would plug 1 of the C13 ends into each PSU.
My question is will this work? I know that the initial adapter is rated for 30 amps and 250V but the L6-30 to C13 is rated for 15 amp 250V. So is that 15 amp per C13 plug or is the whole adapter rated at 15 amp? And again will this work?
-Thanks