The new AMD R7 and R9 GPU:s for mining

[Cryptozillah]

Can anyone give me direx to set that up I am still new to the whole game here.

https://cryptomadness.wordpress.com/2014/12/05/new-x11-sgminer-with-p-percent-of-increasing-hashrate/

[Coryvmcs1]

Can anyone give me direx to set that up I am still new to the whole game here.

https://cryptomadness.wordpress.com/2014/12/05/new-x11-sgminer-with-p-percent-of-increasing-hashrate/

trying to get it to run but it just fails and doesn't run.

[Coryvmcs1]

Here is the error I am getting? Anyone got any feedback?

[Coryvmcs1]

I figured it out.

Here is what I am getting using Wolf-x11-mod on r9 390 and r7 370 using Sgminer v5

[Cryptozillah]

I figured it out.

Here is what I am getting using Wolf-x11-mod on r9 390 and r7 370 using Sgminer v5

Thanks for the results !
The R7 370 seem pretty descent, i guess it is pulling around 90w from the wall.
The R9 390 is a bit disappointing though. But i guess that comes from that these cards where not out on the market when Wolf0 was tweaking those binaries.

I bet Wolf0 or someone else will tweak stuff for the new cards but if they ever will hit the public i dont know.

[Coryvmcs1]

I sure hope they tweak them as that would be great. I think these cards can do much better but I am not pushing them to the full potential.

[crazyivan]

What Wolf0 binaries do you use for these new 370, 380 and 390 chips? As far as I know he never made his binaries for these new cards.

About etherum, I also tried to mine it with my 380 and it says no gpu found. Anyone else any luck with this?

[crazyivan]

What Wolf0 binaries do you use for these new 370, 380 and 390 chips? As far as I know he never made his binaries for these new cards.

About etherum, I also tried to mine it with my 380 and it says no gpu found. Anyone else any luck with this?

They're the same shit rebranded. 390 == 290. 380 == 285.

So what do I use for my Tonga bios?

[crazyivan]

What Wolf0 binaries do you use for these new 370, 380 and 390 chips? As far as I know he never made his binaries for these new cards.

About etherum, I also tried to mine it with my 380 and it says no gpu found. Anyone else any luck with this?

They're the same shit rebranded. 390 == 290. 380 == 285.

So what do I use for my Tonga bios?

Good question. I think some people use renamed Tahiti ones.

Doesn't work in my case. I used Tahiti, copied over my original one, renamed it to match it and I get increase from 3.1 to 3.3.
Has anyone else had success in getting higher result? R9 380 card.

[Air Jordan]

Is it possible to undervolt R7 370 cards with use of VBE7?

[beyinsi]

whats real hashes r7 370s for x11 algo?

[Dokole]

http://rgho.st/6gPjY7zJq
here is benchmark of r9 380 (4 gb)

ore you can see this benchark on this site

https://www.nicehash.com/?p=calc&name=AMD%20Radeon%20(TM)%20R9%20380%20Series&speed3=5.20&speed4=2.00&speed5=294.70&speed6=1.70&speed7=6.30&speed8=0.27&speed10=0.00&speed11=0.00&speed12=0.00&speed14=5.70&speed16=2.05&speed17=0.00&speed18=2.06&speed20=19.75&speed21=0.91&nhmver=1.6.1.4&cost=1&power=1

if someone can, please wright your settings for mining on it
now i mine ETH 19.95 MH

[doktor83]

WIth the right settings (without bios mod) the R9 380 can go about 21.5 MHS

[Dokole]

WIth the right settings (without bios mod) the R9 380 can go about 21.5 MHS

can you tell ore give a link on settings on wich r9 380 gives 21.5 mhs ?
i had already installed all drivers wich i find on official site, tested different settings.. but i did`t find "right" settings ...
for drivers i stop my chose on driver "non-whql-win10-64bit-radeon-software-crimson-16.8.1-aug4" (maybe it will be usefull for somebody)
if you (ore somebode who reed this) can give right settings please wright them, i will be wery glad
thanks!

[doktor83]

Oh Wolf0 you are so lovely