raidersan (OP)
Newbie
Offline
Activity: 36
Merit: 0
|
|
October 20, 2016, 07:51:38 PM |
|
One of my HD7990 is only showing 1 of the 2 GPUs. When I try to flash with atiflash it also only list the slave GPU. Sometimes the little green led by the slot is lit, but not always. Is there anything I could try?
Thanks in advance.
|
|
|
|
Raja_MBZ
Legendary
Offline
Activity: 1862
Merit: 1505
|
|
October 20, 2016, 09:03:33 PM |
|
Is the device manager able to find it? Check it... Device manager is in the control panel. I'd recommend you to un-install any drivers currently installed and then re-install the updated drivers.
|
|
|
|
raidersan (OP)
Newbie
Offline
Activity: 36
Merit: 0
|
|
October 20, 2016, 09:55:03 PM |
|
Is the device manager able to find it? Check it... Device manager is in the control panel. I'd recommend you to un-install any drivers currently installed and then re-install the updated drivers.
No, it only sees one GPU, same in Linux.
|
|
|
|
hendra147
|
|
October 21, 2016, 04:18:39 AM |
|
Is the device manager able to find it? Check it... Device manager is in the control panel. I'd recommend you to un-install any drivers currently installed and then re-install the updated drivers.
No, it only sees one GPU, same in Linux. are you have trying to use only 1 vga ? how about the fan ? if the vga not listed it's seem the conector is eror or maybe your vga is dead
|
|
|
|
Haidong Liang
Newbie
Offline
Activity: 65
Merit: 0
|
|
October 21, 2016, 07:41:27 AM |
|
You may flip the BIOS switch on top of the card to see if it is BIOS related. Or you can change the PCIE slot.
|
|
|
|
Raja_MBZ
Legendary
Offline
Activity: 1862
Merit: 1505
|
|
October 21, 2016, 08:30:26 AM |
|
Is the device manager able to find it? Check it... Device manager is in the control panel. I'd recommend you to un-install any drivers currently installed and then re-install the updated drivers.
No, it only sees one GPU, same in Linux. Try to take out the one which is working, and place the one which is not working in that slot. See if it is showing any display at all. That's a sign of a ... dead GPU by the way. Hopefully it's not dead.
|
|
|
|
raidersan (OP)
Newbie
Offline
Activity: 36
Merit: 0
|
|
October 21, 2016, 09:05:25 AM |
|
You may flip the BIOS switch on top of the card to see if it is BIOS related. Or you can change the PCIE slot.
No effect!
|
|
|
|
raidersan (OP)
Newbie
Offline
Activity: 36
Merit: 0
|
|
October 21, 2016, 09:08:38 AM |
|
Is the device manager able to find it? Check it... Device manager is in the control panel. I'd recommend you to un-install any drivers currently installed and then re-install the updated drivers.
No, it only sees one GPU, same in Linux. Try to take out the one which is working, and place the one which is not working in that slot. See if it is showing any display at all. That's a sign of a ... dead GPU by the way. Hopefully it's not dead. Can the GPU be taken out? I thought they were soldered in. I will try that, do you which one is slave? The one above the PCI-e connector?
|
|
|
|
raidersan (OP)
Newbie
Offline
Activity: 36
Merit: 0
|
|
October 21, 2016, 09:45:56 AM |
|
Is the device manager able to find it? Check it... Device manager is in the control panel. I'd recommend you to un-install any drivers currently installed and then re-install the updated drivers.
No, it only sees one GPU, same in Linux. are you have trying to use only 1 vga ? how about the fan ? if the vga not listed it's seem the conector is eror or maybe your vga is dead VGA, you mean GPU? Of course I am trying to mine with both GPUs
|
|
|
|
Raja_MBZ
Legendary
Offline
Activity: 1862
Merit: 1505
|
|
October 21, 2016, 01:16:20 PM |
|
Is the device manager able to find it? Check it... Device manager is in the control panel. I'd recommend you to un-install any drivers currently installed and then re-install the updated drivers.
No, it only sees one GPU, same in Linux. Try to take out the one which is working, and place the one which is not working in that slot. See if it is showing any display at all. That's a sign of a ... dead GPU by the way. Hopefully it's not dead. Can the GPU be taken out? I thought they were soldered in. I will try that, do you which one is slave? The one above the PCI-e connector? GPU's can be taken out very easily, with a bit of force. Take out both of the GPU's, and try checking and making them work one by one. Just don't place both of the GPU's at once. Google around any tutorial/video if you're taking it out for the first time, it's easy.
|
|
|
|
raidersan (OP)
Newbie
Offline
Activity: 36
Merit: 0
|
|
October 21, 2016, 02:02:17 PM |
|
GPU's can be taken out very easily, with a bit of force. Take out both of the GPU's, and try checking and making them work one by one. Just don't place both of the GPU's at once. Google around any tutorial/video if you're taking it out for the first time, it's easy.
Raja, I cannot seem to video a tutorial on getting the GPU out, do you remember where you saw this?
|
|
|
|
Raja_MBZ
Legendary
Offline
Activity: 1862
Merit: 1505
|
|
October 21, 2016, 02:15:01 PM |
|
GPU's can be taken out very easily, with a bit of force. Take out both of the GPU's, and try checking and making them work one by one. Just don't place both of the GPU's at once. Google around any tutorial/video if you're taking it out for the first time, it's easy.
Raja, I cannot seem to video a tutorial on getting the GPU out, do you remember where you saw this? https://www.youtube.com/watch?v=Ysk8d_kRg0o
|
|
|
|
raidersan (OP)
Newbie
Offline
Activity: 36
Merit: 0
|
|
October 21, 2016, 04:13:51 PM |
|
GPU's can be taken out very easily, with a bit of force. Take out both of the GPU's, and try checking and making them work one by one. Just don't place both of the GPU's at once. Google around any tutorial/video if you're taking it out for the first time, it's easy.
Raja, I cannot seem to video a tutorial on getting the GPU out, do you remember where you saw this? https://www.youtube.com/watch?v=Ysk8d_kRg0oThis is how to remove a card out of a motherboard.... Joke? I was talking about removing a GPU (the chip) out of the HD7990 PCB (the card)!
|
|
|
|
M5M400
Full Member
Offline
Activity: 162
Merit: 100
supportXMR.com
|
|
October 21, 2016, 04:28:40 PM |
|
GPU's can be taken out very easily, with a bit of force. Take out both of the GPU's, and try checking and making them work one by one. Just don't place both of the GPU's at once. Google around any tutorial/video if you're taking it out for the first time, it's easy.
Raja, I cannot seem to video a tutorial on getting the GPU out, do you remember where you saw this? https://www.youtube.com/watch?v=Ysk8d_kRg0oThis is how to remove a card out of a motherboard.... Joke? I was talking about removing a GPU (the chip) out of the HD7990 PCB (the card)! lol - I think that guy doesn't know that a 7990 is basically 2 7970 on a single PCB... I think if you can't find the device neither on win nor on linux and the bios switch doesn't help... you're f*cked
|
supportXMR.com :: EU(DE) based Monero pool :: 0.6% fee
|
|
|
Qartada
|
|
October 21, 2016, 04:46:20 PM |
|
You may flip the BIOS switch on top of the card to see if it is BIOS related. Or you can change the PCIE slot.
No effect! Can you see it in the device manager? If not, then it is dead. Some times it is in the other device section when it is not recognized.
|
|
|
|
Raja_MBZ
Legendary
Offline
Activity: 1862
Merit: 1505
|
|
October 21, 2016, 06:46:12 PM |
|
GPU's can be taken out very easily, with a bit of force. Take out both of the GPU's, and try checking and making them work one by one. Just don't place both of the GPU's at once. Google around any tutorial/video if you're taking it out for the first time, it's easy.
Raja, I cannot seem to video a tutorial on getting the GPU out, do you remember where you saw this? https://www.youtube.com/watch?v=Ysk8d_kRg0oThis is how to remove a card out of a motherboard.... Joke? I was talking about removing a GPU (the chip) out of the HD7990 PCB (the card)! And all this time I've been thinking that how stupid you are... Funny. I didn't have any experience with that particular card, and didn't know that it comes as twin, in fact, I've no experience with any sort of joint/twin GPU's. Seems like there isn't much hope for your card left, honestly. Check out if there is any bios reset switch or something around the GPU, otherwise it's pretty much gone.
|
|
|
|
kods87
Newbie
Offline
Activity: 15
Merit: 0
|
|
April 17, 2017, 11:18:38 PM |
|
i had same problem and i cannot find solution
|
|
|
|
smaxz
Sr. Member
Offline
Activity: 430
Merit: 253
VeganAcademy
|
|
April 18, 2017, 01:39:17 AM |
|
i know the terminology is muddy since nvidia coined the term "gpu" with their geforce 256 back in '99.. but these days it's generally agreed that the gpu is the entire card.
i have always specified the chip in question as the shading or compute unit and that is what the 7990 has two of (where the heatsink makes direct contact with to draw heat away) and is the issue in this case.
if you're comfortable with the possibility of losing the card altogether trying to fix the faulty compute unit you can try to reflow it in a toaster oven.. this will renew the solder connections and has been known to revive dead cards.
look up "bake gpu oven" for details, i also have a write up in a thread titled "repair old gpu's" or something where i go in to some detail.
i think one should avoid calling this die on the gpu a "gpu" in itself.. although its the heart of the video card and a "cpu" is correctly the equivalent in any computer system.. whenever i hear it referred to as a gpu i think of ignorant sales people referring to computer towers and cases as "hard drives"
good luck with your cards.
|
- NGdTwHRSdnThdi1drQuHGT3khAHRtZ1HMq -
|
|
|
|