Tear off the old fans and use two Noctua 92mm High Static Pressure PWM Fans.
Use small zip ties to hold the on.
Ugly as hell but keeps temps lower than a new Twin Frozr stock cooler and is very quiet.
You can splice in the original fan connector if you want to go all fancy.
~BCX~
Cheers for the tip. Yes, look nice - 6 year warranty too so must have some nice bearings inside.
Can't see the splicing going too well, will just try and power them from the psu through some molex connections or get a fan controller to control them all from one point. They all seem to be gradually grinding to a halt.
If i power the machines off, most i have to manually tap to get the fans started, some are okay once they get a bit of a bump start.
These msi are not meant to be run 24/7 i guess. Windforce have no such issues.