☞[∁∁] ∁yber∁oin [NoPremine][∁yberNodes][Stealth][vPoS]☜

[minerpools]

SuchPool is back!!

https://suchpool.pw/cc/ up and ready

Welcome back bro!

[CyberCoinDev]

Hey DEV , how long does it take to start staking ? it says 1 hour , is that right ?

• High vPoS starts at block 2788

1 hour is the maturity, but no staking will take place before block 2788.

[kevin1234a]

maybe its a question not to asked at this time, but what would be the ideal block size (volume of coins) we have to use for staking purposes in each address. it is coin control related question i havent used it before

Yea , my bad , I didn't fully read through , just kinda brushed through  lol , but I kinda like the coin though .

what kinda sweat reply you had given me lol

[CyberCoinDev]

maybe its a question not to asked at this time, but what would be the ideal block size (volume of coins) we have to use for staking purposes in each address. it is coin control related question i havent used it before

Yea , my bad , I didn't fully read through , just kinda brushed through  lol , but I kinda like the coin though .

Basically you use coin control and select all your inputs and send them to one address.
The wallet will show you on the dashboard how much coins a staked block needs to be at
to stake at a certain percent, so if combining inputs will not put you at the next level you are better off
leaving your inputs alone.

 Those numbers will get higher as coin supply increases so you will need to keep a close eye on them.
In the first 15 days of vPoS your initial PoW investment will increase at a great rate,
then there will be a sudden drop of 90% interest on all slabs.

* The wallet will not split an input when it's staked so no need to re-combine unless you want to add more coins.

[kevin1234a]

Basically you use coin control and select all your inputs and send them to one address.
The wallet will show you on the dashboard how much coins a staked block needs to be at
to stake at a certain percent, so if combining inputs will not put you at the next level you are better off
leaving your inputs alone.

 Those numbers will get higher as coin supply increases so you will need to keep a close eye on them.
In the first 15 days of vPoS your initial PoW investment will increase at a great rate,
then there will be a sudden drop of 90% interest on all slabs.

* The wallet will not split an input when it's staked so no need to re-combine unless you want to add more coins.

so min block on wallet main screen is amount of coins in each address, right ?

[freedomsr40]

maybe its a question not to asked at this time, but what would be the ideal block size (volume of coins) we have to use for staking purposes in each address. it is coin control related question i havent used it before

Yea , my bad , I didn't fully read through , just kinda brushed through  lol , but I kinda like the coin though .

Basically you use coin control and select all your inputs and send them to one address.
The wallet will show you on the dashboard how much coins a staked block needs to be at
to stake at a certain percent, so if combining inputs will not put you at the next level you are better off
leaving your inputs alone.

 Those numbers will get higher as coin supply increases so you will need to keep a close eye on them.
In the first 15 days of vPoS your initial PoW investment will increase at a great rate,
then there will be a sudden drop of 90% interest on all slabs.

* The wallet will not split an input when it's staked so no need to re-combine unless you want to add more coins.

whats the best block size then and whats the approx percent of interest?

[TimSweat]

maybe its a question not to asked at this time, but what would be the ideal block size (volume of coins) we have to use for staking purposes in each address. it is coin control related question i havent used it before

Yea , my bad , I didn't fully read through , just kinda brushed through  lol , but I kinda like the coin though .

Basically you use coin control and select all your inputs and send them to one address.
The wallet will show you on the dashboard how much coins a staked block needs to be at
to stake at a certain percent, so if combining inputs will not put you at the next level you are better off
leaving your inputs alone.

 Those numbers will get higher as coin supply increases so you will need to keep a close eye on them.
In the first 15 days of vPoS your initial PoW investment will increase at a great rate,
then there will be a sudden drop of 90% interest on all slabs.

* The wallet will not split an input when it's staked so no need to re-combine unless you want to add more coins.

Ok , so I should use one address for my coins ? instead of multiple .

[louiseth1]

We're up for those interested in stability

https://SuchPool.pw/cc

[CyberCoinDev]

maybe its a question not to asked at this time, but what would be the ideal block size (volume of coins) we have to use for staking purposes in each address. it is coin control related question i havent used it before

Yea , my bad , I didn't fully read through , just kinda brushed through  lol , but I kinda like the coin though .

Basically you use coin control and select all your inputs and send them to one address.
The wallet will show you on the dashboard how much coins a staked block needs to be at
to stake at a certain percent, so if combining inputs will not put you at the next level you are better off
leaving your inputs alone.

 Those numbers will get higher as coin supply increases so you will need to keep a close eye on them.
In the first 15 days of vPoS your initial PoW investment will increase at a great rate,
then there will be a sudden drop of 90% interest on all slabs.

* The wallet will not split an input when it's staked so no need to re-combine unless you want to add more coins.

Ok , so I should use one address for my coins ? instead of multiple .

It works by staked block size or what is also referred to as input, which means the amount of coins in a staked block.
One address can hold many inputs. so if slab 3 of 1% requires 100k coins for example and your staked amount is 100k or more
you will stake at that percent but if the staked amount is 99k for example you will stake at slab level 2 of 0.5%

You can stake a single input up to 8 times a day on average, more or less.
With the one hour maturity rate you will be able to experiment without losing much time.
When vPoS kicks you will have to decide if you want to combine or not.
The amounts needed for each slab will change by then and we can get a better idea
how many coins an input needs for each level. During High vPoS, those numbers will
change much faster, so you might want to have a bit of extra coins in an input to maintain a slab level.
But your coins will increase as well with interest, it will not be hard to figure out.
Simply put " Keep an eye on your investment " and it will pay off.

* percent interest shown on dashboard is per staked block, not per day or year.

[TimSweat]

maybe its a question not to asked at this time, but what would be the ideal block size (volume of coins) we have to use for staking purposes in each address. it is coin control related question i havent used it before

Yea , my bad , I didn't fully read through , just kinda brushed through  lol , but I kinda like the coin though .

Basically you use coin control and select all your inputs and send them to one address.
The wallet will show you on the dashboard how much coins a staked block needs to be at
to stake at a certain percent, so if combining inputs will not put you at the next level you are better off
leaving your inputs alone.

 Those numbers will get higher as coin supply increases so you will need to keep a close eye on them.
In the first 15 days of vPoS your initial PoW investment will increase at a great rate,
then there will be a sudden drop of 90% interest on all slabs.

* The wallet will not split an input when it's staked so no need to re-combine unless you want to add more coins.

Ok , so I should use one address for my coins ? instead of multiple .

It works by staked block size or what is also referred to as input, which means the amount of coins in a staked block.
One address can hold many inputs. so if slab 3 of 1% requires 100k coins for example and your staked amount is 100k or more
you will stake at that percent but if the staked amount is 99k for example you will stake at slab level 2 of 0.5%

You can stake a single input up to 8 times a day on average, more or less.
With the one hour maturity rate you will be able to experiment without losing much time.
When vPoS kicks you will have to decide if you want to combine or not.
The amounts needed for each slab will change by then and we can get a better idea
how many coins an input needs for each level. During High vPoS, those numbers will
change much faster, so you might want to have a bit of extra coins in an input to maintain a slab level.
But your coins will increase as well with interest, it will not be hard to figure out.
Simply put " Keep an eye on your investment " and it will pay off.

* percent interest shown on dashboard is per staked block, not per day or year.

Ok , I'm kind of getting it now . I'm still learning alot of this as  I go . But I think I get what you mean .

[iqlimasyadiqa]

any pool in here stable find the block ?

[achow101]

All hash rental is on #CC 

[Digital_Currency_LTD]

I wake up in the morning and saw 636.000 MH/s 

[TimSweat]

All hash rental is on #CC 

YEA I KNOW ,

COME ON DEV DON'T STOP IT HERE , KEEP IT ROLLING . GOOD COIN RIGHT OUT THE GATE .

[provenceday]

what's the network hashrate?

[provenceday]

diff hit 6000? really?

[huangliang]

When can I see it in BITTREX exchange

[provenceday]

scam
stay away from coins that when they launch nicehash is at 1.5 btc per gh/s
its more profitable to lease your rigs to them than to mine it.

People think it's another cravecoin. 20times mining profit. So they are mining this.

[provenceday]

With 300btc marketcap, coin price will hit 400sat, that's why people are mining.

[Zikka]

With 300btc marketcap, coin price will hit 400sat, that's why people are mining.

Why 300btc?