PSU wire will not hot ?

[ToQcHista]

please tell me, how to wire in PSU that will not hot

[notlist3d]

Wire as in turn on?   Or are you talking about psu cables getting hot?

As long as you draw within spec you should do on cables.  Don't go with cheap psu. 

Also what miner are you trying to power with this? We can help more if we know this.

[ToQcHista]

i'm interested .

i want All shall know me, that i will be safe

[ToQcHista]

from here , which is good > http://www.robotmarketplace.com/products/images/store_zipwire_lg.jpg

i know that good is 16 gauge.

and paperclip the comparison of  is  is small .

[notlist3d]

please tell me, how to wire in PSU that will not hot

Sorry but I don't know what is PSU . I am newbie here. Can you help me to explain it ? Thanks !

It is a power supply.  When someone refers to PSU it could be server or regular power supply.

If they mention ATX power supply, then it's like a regular computer power supply.   Server power supplies are a little more tricky you need to put wires directly on them or most use breakout boards for PCIe wires.

[notlist3d]

from here , which is good > http://www.robotmarketplace.com/products/images/store_zipwire_lg.jpg

i know that good is 16 gauge.

and paperclip the comparison of  is  is small .

The most important thing is a solid connection.  As long as were talking jumping PSU to turn on.  It is a very small amount of electricity, which a paperclip can handle.

[ToQcHista]

from here , which is good > http://www.robotmarketplace.com/products/images/store_zipwire_lg.jpg

i know that good is 16 gauge.

and paperclip the comparison of  is  is small .

The most important thing is a solid connection.  As long as were talking jumping PSU to turn on.  It is a very small amount of electricity, which a paperclip can handle.

so paperclip is bad because " It is a very small amount of electricity".

and better is Copper?

[notlist3d]

from here , which is good > http://www.robotmarketplace.com/products/images/store_zipwire_lg.jpg

i know that good is 16 gauge.

and paperclip the comparison of  is  is small .

The most important thing is a solid connection.  As long as were talking jumping PSU to turn on.  It is a very small amount of electricity, which a paperclip can handle.

so paperclip is bad because " It is a very small amount of electricity".

and better is Copper?

No I'm not saying it is bad.  Either way will work fine.  The amount of electricity that is going through it (if you use right holes) is very small.

This means you could use paperclip, nicer wire, either will work.  But paperclip works fine, I use them myself.

[ToQcHista]

from here , which is good > http://www.robotmarketplace.com/products/images/store_zipwire_lg.jpg

i know that good is 16 gauge.

and paperclip the comparison of  is  is small .

The most important thing is a solid connection.  As long as were talking jumping PSU to turn on.  It is a very small amount of electricity, which a paperclip can handle.

so paperclip is bad because " It is a very small amount of electricity".

and better is Copper?

No I'm not saying it is bad.  Either way will work fine.  The amount of electricity that is going through it (if you use right holes) is very small.

This means you could use paperclip, nicer wire, either will work.  But paperclip works fine, I use them myself.

You use paperchip ?
Dont hot cable or wire ?

Probably copper is better

[SirChiko]

from here , which is good > http://www.robotmarketplace.com/products/images/store_zipwire_lg.jpg

i know that good is 16 gauge.

and paperclip the comparison of  is  is small .

The most important thing is a solid connection.  As long as were talking jumping PSU to turn on.  It is a very small amount of electricity, which a paperclip can handle.

so paperclip is bad because " It is a very small amount of electricity".

and better is Copper?

No I'm not saying it is bad.  Either way will work fine.  The amount of electricity that is going through it (if you use right holes) is very small.

This means you could use paperclip, nicer wire, either will work.  But paperclip works fine, I use them myself.

You use paperchip ?
Dont hot cable or wire ?

Probably copper is better

Copper would be better but it doesn't transfer alot of electricity so even steel/paperclip is enought.

[ToQcHista]

Paperchip dont will hot wire or cable ?

[notlist3d]

Paperchip dont will hot wire or cable ?

Either one will work.  Paperclip or wire.  It's all about having them in right holes to jump the psu to on.

I do suggest securing it in with electrical tape or something so it can't easily fall out.

[ToQcHista]

So i will  use paperclip , and right holes  will make .


Else what advice me for safetly ?

That  will burn s3 or psub or pci will may ?

[notlist3d]

So i will  use paperclip , and right holes  will make .


Else what advice me for safetly ?

That  will burn s3 or psub or pci will may ?

Advice is check twice and make sure you are in right holes.   If you are not bad things can happen.

As far as burning the S3.  Make sure to use a decent CPU, not super cheap. And also dont use a PCIe y splitter.

[ToQcHista]

So i will  use paperclip , and right holes  will make .


Else what advice me for safetly ?

That  will burn s3 or psub or pci will may ?

Advice is check twice and make sure you are in right holes.   If you are not bad things can happen.

As far as burning the S3.  Make sure to use a decent CPU, not super cheap. And also dont use a PCIe y splitter.

How to mean that paperchip is right holes?

[notlist3d]

So i will  use paperclip , and right holes  will make .


Else what advice me for safetly ?

That  will burn s3 or psub or pci will may ?

Advice is check twice and make sure you are in right holes.   If you are not bad things can happen.

As far as burning the S3.  Make sure to use a decent CPU, not super cheap. And also dont use a PCIe y splitter.

How to mean that paperchip is right holes?

Meaning use a good guide .

If you do proper holes it is low voltage and will just turn on psu.  If you do wrong holes bad things could happen depending on what wrong ones you used.  There are many good guides to do it.

[ToQcHista]

I that will install UPS defense psu or cables ?

How to i understud paperchip is rifht hole ?

[notlist3d]

I that will install UPS defense psu or cables ?

How to i understud paperchip is rifht hole ?

If you are talking about standard UPS and using it so it never drops power it just plugs in.  But you might check I'm not sure you really mean UPS as they are normally not used in home miners.

And on paperclip just google or search forums.   It is very easy to find.   

[ToQcHista]

Else what advice me ?

[ToQcHista]

How to will Understud s3 temperatura?