[ANN][2nd Proof of Mining Campaign] Coin Magi | PoS-II | PoM|Unique BLK reward

[hefty]

sorry, was just trying another miner. Shut it off. How do i attach a picture?
I think my miner was running 250-ish before my test with the other miner.

What miner do you use to get 250-ish?

fast hardware.

I managed 124 with a seriously overclocked AMD 9590, so two of those would do the job. Good value CPU too

AMDs are way to go,

1055t - 66 khs i can found them very cheap used with mobos and ram in my country best buy cpu for mining magis around 50$ for used one.

4x1055t 200$ 264 khs, 1xE5-2680 v2 1200$ 265 khs  

[go6ooo1212]

sorry, was just trying another miner. Shut it off. How do i attach a picture?
I think my miner was running 250-ish before my test with the other miner.

What miner do you use to get 250-ish?

fast hardware.

I managed 124 with a seriously overclocked AMD 9590, so two of those would do the job. Good value CPU too

AMDs are way to go,

1055t - 66 khs i can found them very cheap used with mobos and ram in my country best buy cpu for mining magis around 50$ for used one.

4x1055t 200$ 264 khs, 1xE5-2680 v2 1200$ 265 khs  

You could compare electricity costs and consumptions as well...

[hefty]

You could compare electricity costs and consumptions as well...

true ...

125W 1055t so 4 off them 500w lol
115W E5 2680

 

[111magic]

Awesome 116 workers already in the Pool of Mining Pool!

[IncludeBeer]

Not sure why, but I can't seem to connect to the pool.  I just get "retry in 30 seconds..."

I've tried using Wolf's cpu miner, as well as Spexx's. I made an account on the pool, and tried using the info here: http://pom.m-hash.com/index.php?page=gettingstarted

Here's my config:

Code:

C:\Miners\wolf-m7m-cpuminer-V2-x64-0204\minerd-x64-avx-i.exe -a m7mhash -o stratum+tcp://mining.m-hash.com:3334 -u santasnotreal.CPU -p derpy -t 11

Any hints why I can't connect? Thanks!

[Historical]

Not sure why, but I can't seem to connect to the pool.  I just get "retry in 30 seconds..."

I've tried using Wolf's cpu miner, as well as Spexx's. I made an account on the pool, and tried using the info here: http://pom.m-hash.com/index.php?page=gettingstarted

Here's my config:

Code:

C:\Miners\wolf-m7m-cpuminer-V2-x64-0204\minerd-x64-avx-i.exe -a m7mhash -o stratum+tcp://mining.m-hash.com:3334 -u santasnotreal.CPU -p derpy -t 11

Any hints why I can't connect? Thanks!

Hi bud,
I checked on pool. There is no user: santasnotreal
Can you PM your registration mail?

[IncludeBeer]

Not sure why, but I can't seem to connect to the pool.  I just get "retry in 30 seconds..."

I've tried using Wolf's cpu miner, as well as Spexx's. I made an account on the pool, and tried using the info here: http://pom.m-hash.com/index.php?page=gettingstarted

Here's my config:

Code:

C:\Miners\wolf-m7m-cpuminer-V2-x64-0204\minerd-x64-avx-i.exe -a m7mhash -o stratum+tcp://mining.m-hash.com:3334 -u santasnotreal.CPU -p derpy -t 11

Any hints why I can't connect? Thanks!

Hi bud,
I checked on pool. There is no user: santasnotreal
Can you PM your registration mail?

I PM'd you the email address I used when registering on the pool.  I hope that's what you meant

[IncludeBeer]

Not sure why, but I can't seem to connect to the pool.  I just get "retry in 30 seconds..."

I've tried using Wolf's cpu miner, as well as Spexx's. I made an account on the pool, and tried using the info here: http://pom.m-hash.com/index.php?page=gettingstarted

Here's my config:

Code:

C:\Miners\wolf-m7m-cpuminer-V2-x64-0204\minerd-x64-avx-i.exe -a m7mhash -o stratum+tcp://mining.m-hash.com:3334 -u santasnotreal.CPU -p derpy -t 11

Any hints why I can't connect? Thanks!

Hi bud,
I checked on pool. There is no user: santasnotreal
Can you PM your registration mail?

I PM'd you the email address I used when registering on the pool.  I hope that's what you meant

Apparently I'm an idiot.  Figured out the problem: simple typo   I've connected and am hashing away now

[elpsycongro]

Not sure why, but I can't seem to connect to the pool.  I just get "retry in 30 seconds..."

I've tried using Wolf's cpu miner, as well as Spexx's. I made an account on the pool, and tried using the info here: http://pom.m-hash.com/index.php?page=gettingstarted

Here's my config:

Code:

C:\Miners\wolf-m7m-cpuminer-V2-x64-0204\minerd-x64-avx-i.exe -a m7mhash -o stratum+tcp://mining.m-hash.com:3334 -u santasnotreal.CPU -p derpy -t 11

Any hints why I can't connect? Thanks!

Hi bud,
I checked on pool. There is no user: santasnotreal
Can you PM your registration mail?

I PM'd you the email address I used when registering on the pool.  I hope that's what you meant

Apparently I'm an idiot.  Figured out the problem: simple typo  I've connected and am hashing away now

what santa is not real ?  

[malickie]

I am in, Username is Malickie on the CoinMagi Pool.

[velkyprachy]

Which is the fastest miner for Linux? Is it wolfs?

For me yes

[111magic]

I am in, Username is Malickie on the CoinMagi Pool.

Hi amigo welcome on de Proof of Mining campaign.
But check the special pool for this campaign.
Also fill in the Google form.

[malickie]

I am in, Username is Malickie on the CoinMagi Pool.

Hi amigo welcome on de Proof of Mining campaign.
But check the special pool for this campaign.
Also fill in the Google form.

Yea, that's the pool I am on at the moment actually.  I also filled out the form yesterday sometime so I should be good to go I hope.

[meliketitties]

Hey, I'd like to ask a question.
I'm in the PoM campaign already, but now I have to have some downtime for maintentance. My CPU started to get hot, (over 90C) I'll have to shut down for a couple of hours. Does this influence my participation in the campaign or not?
I have already stopped the miner but the CPU doesn't want to go under 50C. Therefore I must shut down because it's a serious anomaly.

[111magic]

I am in, Username is Malickie on the CoinMagi Pool.

Hi amigo welcome on de Proof of Mining campaign.
But check the special pool for this campaign.
Also fill in the Google form.

Yea, that's the pool I am on at the moment actually.  I also filled out the form yesterday sometime so I should be good to go I hope.

Ok amigo, thanks for the respons!

[111magic]

Hey, I'd like to ask a question.
I'm in the PoM campaign already, but now I have to have some downtime for maintentance. My CPU started to get hot, (over 90C) I'll have to shut down for a couple of hours. Does this influence my participation in the campaign or not?
I have already stopped the miner but the CPU doesn't want to go under 50C. Therefore I must shut down because it's a serious anomaly.

For those reasons is that no problem! Good thing you bring it up!

[meliketitties]

Hey, I'd like to ask a question.
I'm in the PoM campaign already, but now I have to have some downtime for maintentance. My CPU started to get hot, (over 90C) I'll have to shut down for a couple of hours. Does this influence my participation in the campaign or not?
I have already stopped the miner but the CPU doesn't want to go under 50C. Therefore I must shut down because it's a serious anomaly.

For those reasons is that no problem! Good thing you bring it up!

Ok, thanks. As you can see I'm already back online. CPUTIN sensor 50C at peak load, Core sensors stable 40C at peak load. Idle is 20C with this big hunk of aluminum.
Something clogged the heatsink and lint buildup on the fan didn't allow full RPM so there was no airflow. New thermal paste, dust blown out, all done in one hour. Ninja fix

[111magic]

Hey, I'd like to ask a question.
I'm in the PoM campaign already, but now I have to have some downtime for maintentance. My CPU started to get hot, (over 90C) I'll have to shut down for a couple of hours. Does this influence my participation in the campaign or not?
I have already stopped the miner but the CPU doesn't want to go under 50C. Therefore I must shut down because it's a serious anomaly.

For those reasons is that no problem! Good thing you bring it up!

Ok, thanks. As you can see I'm already back online. CPUTIN sensor 50C at peak load, Core sensors stable 40C at peak load. Idle is 20C with this big hunk of aluminum.
Something clogged the heatsink and lint buildup on the fan didn't allow full RPM so there was no airflow. New thermal paste, dust blown out, all done in one hour. Ninja fix

Nice well done!

[Spexx]

Hey, I'd like to ask a question.
I'm in the PoM campaign already, but now I have to have some downtime for maintentance. My CPU started to get hot, (over 90C) I'll have to shut down for a couple of hours. Does this influence my participation in the campaign or not?
I have already stopped the miner but the CPU doesn't want to go under 50C. Therefore I must shut down because it's a serious anomaly.

For those reasons is that no problem! Good thing you bring it up!

Ok, thanks. As you can see I'm already back online. CPUTIN sensor 50C at peak load, Core sensors stable 40C at peak load. Idle is 20C with this big hunk of aluminum.
Something clogged the heatsink and lint buildup on the fan didn't allow full RPM so there was no airflow. New thermal paste, dust blown out, all done in one hour. Ninja fix

Dang!

I knew there was a reason why I put "Caution - this software makes your CPU run hot - please make sure your CPU heatsink and cooling fan are clean and free of dust" in the startup header for my miner software.

I could not, for the life of me, remember why I put that there

Edit: If you did not use Coollaboratory Liquid Ultra, you did it wrong

[Spexx]

1,720 Shares I love this System !!
Is possible mine with my Server at home?

That should be possible. Remember the overall limit of 250 Kh/s on the POM pool though. If you are likely to exceed this figure, you should consider directing the "spare" hashpower at one of the other pools.