quaz (OP)
Newbie
Offline
Activity: 30
Merit: 0
|
|
May 17, 2015, 07:46:33 AM |
|
Hi Guys ! I just got a new S5 and have the following problem: http://oldav.ro/econt/fish/s5.jpgWhat's wrong in the setup? I am new to mining. PSU is 700w : EP-700 BR II with a 52.5 to 12V ( that is problem ?! ). After several minutes, the LEDs of network interface are switched off, the fan goes into a low speed and the S5 stops responding to ping. I really need help, if the equipment is damaged you have to send it back. Thanks !!
|
|
|
|
onewiseguy
|
|
May 17, 2015, 07:47:59 AM |
|
Hi Guys ! I just got a new S5 and have the following problem: What's wrong in the setup? I am new to mining. PSU is 700w : EP-700 BR II with a 52.5 to 12V ( that is problem ?! ). After several minutes, the LEDs of network interface are switched off, the fan goes into a low speed and the S5 stops responding to ping. I really need help, if the equipment is damaged you have to send it back. Thanks !! check the software on SD card. maybe reinstall if you bought used. https://www.bitmaintech.com/support.htm?pid=00720150101032800325X8cMcY2y068F
|
|
|
|
quaz (OP)
Newbie
Offline
Activity: 30
Merit: 0
|
|
May 17, 2015, 07:55:24 AM |
|
My File System Version is : Wed Jan 7 14:05:02 CST 2015. I must write SD-S5-20150415.tar.gz ?
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
May 17, 2015, 07:55:58 AM Last edit: May 17, 2015, 08:34:04 AM by notlist3d |
|
Hi Guys ! I just got a new S5 and have the following problem: What's wrong in the setup? I am new to mining. PSU is 700w : EP-700 BR II with a 52.5 to 12V ( that is problem ?! ). After several minutes, the LEDs of network interface are switched off, the fan goes into a low speed and the S5 stops responding to ping. I really need help, if the equipment is damaged you have to send it back. Thanks !! Did you get it new from bitmain? The PSU seems pretty cheap might try another one if you have it. If that does not work look over here to check PCB- https://bitmain.zendesk.com/hc/en-us/articles/204875015-How-to-diagnose-S5-hashing-PCBAnd if still nothing I would look into flashing with firmware. A example of that is here - https://bitmain.zendesk.com/hc/en-us/articles/203559969-My-S5-hashes-at-about-600GH-S
|
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
May 17, 2015, 08:10:08 AM |
|
I would not say new from aliexpress. The seller bought it from bitmain and have been running it. Technically you bought from third party seller. From their pictures it could be as old as January. Also they are using a higher quality power supply then you were, they are using a gold COUGAR-GX cannot tell watts though from angle. I would try a nicer PSU and see if any better luck. And if that does not work look at two guides I posted.
|
|
|
|
quaz (OP)
Newbie
Offline
Activity: 30
Merit: 0
|
|
May 17, 2015, 08:15:17 AM |
|
That's what I do. Do you think I have a result if i write and SD-S5-20150415.tar.gz?
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
May 17, 2015, 08:37:00 AM |
|
That's what I do. Do you think I have a result if i write and SD-S5-20150415.tar.gz?
Honestly I cannot say as I am not there looking at it. But i would follow the two guides in https://bitcointalk.org/index.php?topic=1063189.msg11398830#msg11398830 . The first one is very good about checking cables making sure they are right (I have a feeling they are, but does not hurt to check). The second one is dealing with flashing firmware and one reason I like it is that makes sure to check keep settings (makes your life easier). And I still think PSU could be worth trying nicer one if that does not do it. If you have a nicer PSU sitting around I would actually try it first.
|
|
|
|
pinhead666
|
|
May 17, 2015, 08:58:42 AM |
|
I would try another pool as first pool.And S1 and S3 had similar problems when I changed pool/worker settings and didn't boot them.
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
May 17, 2015, 09:02:48 AM |
|
I would try another pool as first pool.And S1 and S3 had similar problems when I changed pool/worker settings and didn't boot them.
Good catch that is a odd port on the first one aswell. Here is a link to Bitmain's antpool: https://antpool.com/home.htm
|
|
|
|
Rabinovitch
Legendary
Offline
Activity: 2030
Merit: 1076
BTCLife.global participant
|
|
May 17, 2015, 09:17:11 AM |
|
Man, why don't you buy directly from Bitmain?.. Tomorrow I will try with a source of 62.5 A at 12 V. Good Idea. I do not understand why ASIC status is OK, why the temperature is zero and no hashing ? Must try to write SD-S5-20150415.tar.gz ?
In any strange case firstly try to reflash the firmware. It should not harm your miner, but in many cases can help.
|
|
|
|
quaz (OP)
Newbie
Offline
Activity: 30
Merit: 0
|
|
May 17, 2015, 09:30:43 AM |
|
I wrote last firmware but still nothing happens. I think I have no enough power. I read that the PSU should have at least 60A on 12V. Tomorrow or after tomorrow i will put a higher source. Please explain to me what is the meaning and connection between the following terms: local work, getworks and discarded. At this time, asic status shows "o" on all the chain1 with 26grd temperature and "-" on all the chain2 temperature 0. I tested chain1 , but i dont test chain2 because i dont have right tools.
|
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
May 17, 2015, 09:42:48 AM |
|
I wrote last firmware but still nothing happens. I think I have no enough power. I read that the PSU should have at least 60A on 12V. Tomorrow or after tomorrow i will put a higher source. Please explain to me what is the meaning and connection between the following terms: local work, getworks and discarded. At this time, asic status shows "o" on all the chain1 with 26grd temperature and "-" on all the chain2 temperature 0. I tested chain1 , but i dont test chain2 because i dont have right tools.
The "o" is good it means the chip is in working order. If you see "x" there its bad and you might have a bad chip. Can yo take a picture of configuration page?
|
|
|
|
quaz (OP)
Newbie
Offline
Activity: 30
Merit: 0
|
|
May 17, 2015, 09:47:55 AM |
|
Of course, but what configuration ? Miner configuration ?
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
May 17, 2015, 09:51:28 AM |
|
Of course, but what configuration ? Miner configuration ?
Yes so we can see how pools are entered. Antpool works great so just trying to really sure you have it in right.
|
|
|
|
quaz (OP)
Newbie
Offline
Activity: 30
Merit: 0
|
|
May 17, 2015, 09:56:06 AM |
|
|
|
|
|
|
quaz (OP)
Newbie
Offline
Activity: 30
Merit: 0
|
|
May 17, 2015, 10:14:20 AM |
|
i put the latest firmware, and i have 350 frequency. If the new PSU dont solve the problem, i think the S5 is broken. http://oldav.ro/econt/fish/s54.jpg
|
|
|
|
Zich
Legendary
Offline
Activity: 1190
Merit: 1000
|
|
May 17, 2015, 10:31:18 AM |
|
I believe problem on PSU, buy good PSU like corsair, seasonic or evga at least 750 watt.
|
|
|
|
|