Sukrim
Legendary
Offline
Activity: 2618
Merit: 1007
|
|
May 30, 2011, 10:37:09 PM |
|
Not a 100% mining related accident, but I found out the hard way that my whole flat has a 16A fuse (which is BEFORE my circuit breaker... and of course irreplaceable without redoing the whole wiring in the flat and probably house).
At least now I know about it and will be more careful when planning to boil water for tea while having the washing machine switched on.
|
|
|
|
Genrobo
Newbie
Offline
Activity: 28
Merit: 0
|
|
May 30, 2011, 10:41:04 PM |
|
My mining rigs have kicked the breaker in my house once, but beyond that I don't have any scary mining stories.
Hardware stories though? Once I was replacing the thermal paste on my CPU, I got some thermal paste on my hand and didn't wash it off. (That's a BIG mistake depending on what type of thermal paste...)
I now have a permanent chemical burn on my hand from CPU thermal paste... Any skin I have that grows over the burn dies at a very accelerated rate, it looks like psoriasis.
did you go to the doctor for that? Nah, I didn't go to a doctor, I went over the affected area with a razor blade as soon as I realized it was burning, to get out the skin and chemicals. I washed off what I could, and I tried to cut the chemicals out of my skin, but I didn't get all of it. I don't have prints there anymore. It's on the right side of my right hand's index finger.
|
|
|
|
SgtSpike
Legendary
Offline
Activity: 1400
Merit: 1005
|
|
May 31, 2011, 03:05:50 AM |
|
Who here would be willing to be interviewed for articles on my site, bitcoinminingaccidents.com (reg'd but undeveloped) ?
I would, but you'd have to pay me for it. My mining rigs have kicked the breaker in my house once, but beyond that I don't have any scary mining stories.
Hardware stories though? Once I was replacing the thermal paste on my CPU, I got some thermal paste on my hand and didn't wash it off. (That's a BIG mistake depending on what type of thermal paste...)
I now have a permanent chemical burn on my hand from CPU thermal paste... Any skin I have that grows over the burn dies at a very accelerated rate, it looks like psoriasis.
did you go to the doctor for that? Nah, I didn't go to a doctor, I went over the affected area with a razor blade as soon as I realized it was burning, to get out the skin and chemicals. I washed off what I could, and I tried to cut the chemicals out of my skin, but I didn't get all of it. I don't have prints there anymore. It's on the right side of my right hand's index finger. Dang, I had no idea thermal paste could do that!
|
|
|
|
grue
Legendary
Offline
Activity: 2058
Merit: 1434
|
|
May 31, 2011, 03:10:42 AM |
|
Nah, I didn't go to a doctor, I went over the affected area with a razor blade as soon as I realized it was burning, to get out the skin and chemicals. I washed off what I could, and I tried to cut the chemicals out of my skin, but I didn't get all of it. I don't have prints there anymore. It's on the right side of my right hand's index finger.
that sounds very painful. That will probably remind me to wear gloves when handling ANY chemical.
|
|
|
|
Jaime Frontero
|
|
May 31, 2011, 04:13:26 AM |
|
My mining rigs have kicked the breaker in my house once, but beyond that I don't have any scary mining stories.
Hardware stories though? Once I was replacing the thermal paste on my CPU, I got some thermal paste on my hand and didn't wash it off. (That's a BIG mistake depending on what type of thermal paste...)
I now have a permanent chemical burn on my hand from CPU thermal paste... Any skin I have that grows over the burn dies at a very accelerated rate, it looks like psoriasis.
did you go to the doctor for that? Nah, I didn't go to a doctor, I went over the affected area with a razor blade as soon as I realized it was burning, to get out the skin and chemicals. I washed off what I could, and I tried to cut the chemicals out of my skin, but I didn't get all of it. I don't have prints there anymore. It's on the right side of my right hand's index finger. really? interesting. what brand of thermal paste, and what was the formulation: silver? zinc? how long did it stay on your skin? how long have the prints been gone? much pain?
|
|
|
|
rezin777
|
|
May 31, 2011, 04:21:26 AM |
|
I don't have prints there anymore.
I just realized, this could be valuable information.
|
|
|
|
Jaime Frontero
|
|
May 31, 2011, 04:39:46 AM |
|
I don't have prints there anymore.
I just realized, this could be valuable information. took you eight minutes longer than me.
|
|
|
|
Raize
Donator
Legendary
Offline
Activity: 1419
Merit: 1015
|
|
May 31, 2011, 04:48:58 AM |
|
Tell me what thermal paste you were using, I want to put smiley faces into my fingerprints!
|
|
|
|
pokermon919
Member
Offline
Activity: 84
Merit: 10
|
|
May 31, 2011, 05:03:01 AM |
|
I'm guessing it was silver compound, when I was in chem class we were told to be very careful with it or we'll get a chemical burn that will stain the skin for a very long time when we were handling solutions with silver in it. Just a guess, lemme know if I'm right plox!
|
|
|
|
bitcool
Legendary
Offline
Activity: 1441
Merit: 1000
Live and enjoy experiments
|
|
May 31, 2011, 05:05:52 AM |
|
and remember to wash beforehand in the bathroom.
|
|
|
|
Genrobo
Newbie
Offline
Activity: 28
Merit: 0
|
|
May 31, 2011, 05:28:15 AM |
|
It was either Arctic Silver 5 or it was an OEM brand. Those are the only types I've worked with. I don't remember exactly which it was.
|
|
|
|
kjj
Legendary
Offline
Activity: 1302
Merit: 1026
|
|
May 31, 2011, 06:12:51 AM |
|
Strange. He must be really unlucky. I've had every imaginable type of heatsinking compound all over my fingers before and never had any side effects from it.
|
17Np17BSrpnHCZ2pgtiMNnhjnsWJ2TMqq8 I routinely ignore posters with paid advertising in their sigs. You should too.
|
|
|
OVerLoRDI
Member
Offline
Activity: 60
Merit: 10
|
|
May 31, 2011, 06:23:22 AM |
|
Typical stuff, cut fingers while working with cheap cases and fingers hurt by fans.
|
|
|
|
phillipsjk
Legendary
Offline
Activity: 1008
Merit: 1001
Let the chips fall where they may.
|
|
May 31, 2011, 06:50:59 AM |
|
I'll start with one from a friend of mine (who shall remain anonymous): he lives in a place with old 120V electrical wiring. He put a rig of ~1.6kW (~13A), as measured by a kill-a-watt, on a 20A circuit for about half a day, until he started smelling smoke in his apartment, apparently coming from the wiring inside the walls. He completely stopped using this circuit, and now runs his rig on a dedicated 240V circuit. A 20A circuit is normally rated 16A for continuous loads by the National Electric Code, but that old wiring was likely defective and the insulation probably started melting.
Did you actually measure the current with the Kill-a-watt? Most my computer have a power factor of about 0.67. That means that for every 100W (833mA resistive), the actual current draw is closer to 1.24 amps. or in your example, 19.9 amps. My kill-a-watt is only rated to measure up to 15Amps, IIRC.
|
James' OpenPGP public key fingerprint: EB14 9E5B F80C 1F2D 3EBE 0A2F B3DE 81FF 7B9D 5160
|
|
|
mrb (OP)
Legendary
Offline
Activity: 1512
Merit: 1028
|
|
May 31, 2011, 07:00:05 AM |
|
Yep, he did measure. I am pretty sure his PSU had active PFC, so pf = 1.0.
|
|
|
|
OVerLoRDI
Member
Offline
Activity: 60
Merit: 10
|
|
June 02, 2011, 01:51:14 AM |
|
I'll start with one from a friend of mine (who shall remain anonymous): he lives in a place with old 120V electrical wiring. He put a rig of ~1.6kW (~13A), as measured by a kill-a-watt, on a 20A circuit for about half a day, until he started smelling smoke in his apartment, apparently coming from the wiring inside the walls. He completely stopped using this circuit, and now runs his rig on a dedicated 240V circuit. A 20A circuit is normally rated 16A for continuous loads by the National Electric Code, but that old wiring was likely defective and the insulation probably started melting.
That is makes me worry. I am putting a lot of load on my old house wiring. The electrics were redone sometime after grounded plugs became standard, but it is still very old. Yay for 100+ year old houses...
|
|
|
|
Maxxx
Member
Offline
Activity: 70
Merit: 11
|
|
June 02, 2011, 02:06:26 AM |
|
I'll start with one from a friend of mine (who shall remain anonymous): he lives in a place with old 120V electrical wiring. He put a rig of ~1.6kW (~13A), as measured by a kill-a-watt, on a 20A circuit for about half a day, until he started smelling smoke in his apartment, apparently coming from the wiring inside the walls. He completely stopped using this circuit, and now runs his rig on a dedicated 240V circuit. A 20A circuit is normally rated 16A for continuous loads by the National Electric Code, but that old wiring was likely defective and the insulation probably started melting.
That is makes me worry. I am putting a lot of load on my old house wiring. The electrics were redone sometime after grounded plugs became standard, but it is still very old. Yay for 100+ year old houses... Yeah, that story actually made me purchase a kill-a-watt.
|
|
|
|
gigabytecoin
|
|
June 09, 2011, 10:40:37 AM |
|
Just almost set my entire mining rig room on fire... With shitty PSUs apparantly. I hooked up 2*850W raidmax gold PSUs to 6 video cards and it started smoking like crazy. I can hook up 6 * video cards to a 1200 watt gold psu with no problems whatsoever. WTF raidmax?!? You made me inhale some kind of weird assed fumes!
|
|
|
|
rb1205
|
|
June 09, 2011, 10:55:11 AM |
|
Thank you EU for our 230 V power. Hey US, enjoy your doubled current drain at your wall socket
|
|
|
|
d3m0n1q_733rz
|
|
June 09, 2011, 12:30:40 PM |
|
Insert Quote Thank you EU for our 230 V power.
Hey US, enjoy your doubled current drain at your wall socket Grin Enjoy your half-assed amperage in yours.
|
Funroll_Loops, the theoretically quicker breakfast cereal! Check out http://www.facebook.com/JupiterICT for all of your computing needs. If you need it, we can get it. We have solutions for your computing conundrums. BTC accepted! 12HWUSguWXRCQKfkPeJygVR1ex5wbg3hAq
|
|
|
|