RyanWebber (OP)
Member
 Offline
Activity: 84
Merit: 10
|
 |
June 01, 2011, 10:59:35 PM |
|
Hey guys, I have a quick question. I'm building a mining rig from spare parts, and I got a 3 slot motherboard and 3 gpus laying around. Thing is I have cards from different series. I have one 5850 and two 6950's. Now I know they won't crossfire together but would I be able to plug all 3 into the mobo and mine with them all seperate or am I stuck with just the two 6950's?
|
If I have been remotely useful feel free to donate:
1DgkA1S64CoVGu1q5JFSz4maRQJYw2dMC8
|
|
|
|
|
|
|
|
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
|
tachi641
|
|
June 01, 2011, 11:03:39 PM |
|
I run a 6990 and a 6950 on 1 mobo, you wont have problems I don't think. Make sure you have a dummy plug, and do not cross fire them. You should be fine.
|
|
|
|
|
RyanWebber (OP)
Member
Offline
Activity: 84
Merit: 10
|
|
June 01, 2011, 11:19:15 PM |
|
that's the same series.....I run a 6970 and 6990 on the same board crossfired on my gaming rig. 6xxx series go with 6xxx cards and 5xxx cards go with 5xxx cards. What I'm asking is if I can stick 2 cards from completely different series of cards together and have them mine together.
|
If I have been remotely useful feel free to donate:
1DgkA1S64CoVGu1q5JFSz4maRQJYw2dMC8
|
|
|
RyanWebber (OP)
Member
Offline
Activity: 84
Merit: 10
|
|
June 01, 2011, 11:50:20 PM |
|
Anybody...?
|
If I have been remotely useful feel free to donate:
1DgkA1S64CoVGu1q5JFSz4maRQJYw2dMC8
|
|
|
|
Meatball
|
|
June 01, 2011, 11:58:59 PM |
|
Yes, it should work. For a while I had a 5850 running in the same box as a 6950 without a problem.
|
|
|
|
|
|
Meatball
|
|
June 02, 2011, 12:00:27 AM |
|
And actually, come to think about it, I have a media center PC rocking a 4350 that I'm using for the interface and I stuck a 5850 in the other slot and that's been chugging away without a problem as well. Of course, I'm not mining with the 4350 so the media center interface stays snappy, but it's working.
|
|
|
|
|
RyanWebber (OP)
Member
Offline
Activity: 84
Merit: 10
|
|
June 02, 2011, 12:07:05 AM
Last edit: June 02, 2011, 12:21:37 AM by Eggcellent |
|
Yes, it should work. For a while I had a 5850 running in the same box as a 6950 without a problem.
Okay so it works, glad to hear it. You didn't use a crossfire bridge right? Assuming you just plugged them in and left them separated? |
If I have been remotely useful feel free to donate:
1DgkA1S64CoVGu1q5JFSz4maRQJYw2dMC8
|
|
|
|
Yanz
|
|
June 02, 2011, 02:01:12 AM |
|
Did you guys have to do anything special? I can't get my 6950 and my 5970 to play nice together. BSODs and other issues. Who's running linux?
|
With great video cards comes great power consumption.
|
|
|
|
Meatball
|
|
June 02, 2011, 02:26:18 AM |
|
I did not crossfire them. From what I gather, crossfire is not good for mining.
I'm running Win7 here with Catalyst 11.5's and SDK 2.4. I had a bear of a time getting things working right on Win XP so I went with 7. I've also found that the AMD drivers can get a bit wonky at times. If you try to do uninstalls/installs, sometimes crap just gets gunked up and I had to format/rebuild.
Make sure you have more than enough power for both cards on your PSU or you could see all sorts of problems, especially if your PSU has more than 1 12 volt rail. You could be overloading a rail and if one of the cards doesn't get enough power it might not start or it might work half arsed...
|
|
|
|
|
RyanWebber (OP)
Member
Offline
Activity: 84
Merit: 10
|
|
June 02, 2011, 02:56:10 AM |
|
I did not crossfire them. From what I gather, crossfire is not good for mining.
I'm running Win7 here with Catalyst 11.5's and SDK 2.4. I had a bear of a time getting things working right on Win XP so I went with 7. I've also found that the AMD drivers can get a bit wonky at times. If you try to do uninstalls/installs, sometimes crap just gets gunked up and I had to format/rebuild.
Make sure you have more than enough power for both cards on your PSU or you could see all sorts of problems, especially if your PSU has more than 1 12 volt rail. You could be overloading a rail and if one of the cards doesn't get enough power it might not start or it might work half arsed...
We'll I guess I'll see what happens tomorrow when I piece it all together. Hopefully it all works properly without much issue. |
If I have been remotely useful feel free to donate:
1DgkA1S64CoVGu1q5JFSz4maRQJYw2dMC8
|
|
|
|
