How can I add 2 more PCIe slots to this PSU?

[praxe]

http://c773974.r74.cf2.rackcdn.com/356882_272732_01_front_zoom.jpg

I have the OCZ 1250w PSU (there's only 1 so it shouldn't be hard to look up) and there are no molex connectors.

[enmaku]

Use the IDE/SATA ports, hook up the regular everyday molex connectors, then get an adapter like this one. You can probably find that adapter cheaper, but it's dead common and shouldn't be a problem to lay your hands on.

[praxe]

That adapter doesn't work for these sockets.

[juggalodarkclow]

Hook up your modular SATA cables then connect this to the end

http://www.compbargains.com/_e/Power_Cords/sproduct/1022338380/StarTech_com_6in_SATA_Power_to_6_Pin_PCI_Express_Video_Card_Power_Cable_Adapter.htm

[praxe]

Someone else told me the amps are different and will mess up the cards... was that bogus? I'm clueless.

[segabtc]

you have 6 pci-e , you want more? each 8pin PCI-e "can" run a single card. Over at fleabay you might find something like this, not EXACTLY correct but you get the idea.

http://www.ebay.com/itm/Athena-Power-16-Inch-PCI-Express-6-pin-Dual-8-pin-Linear-Extension-EPCIE1628-/350577812540?_trksid=p2045573.m2042&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D27%26meid%3D2259177951953913936%26pid%3D100033%26prg%3D1011%26rk%3D1%26sd%3D350577812540%26

this is a 6 pin to dual 6+2pin, you need an 8 to dual 6+2pin





or to go your route,

http://www.ebay.com/itm/261074032928?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649