Bitcoin Forum
November 09, 2024, 08:20:06 AM *
News: Latest Bitcoin Core release: 28.0 [Torrent]
 
   Home   Help Search Login Register More  
Warning: One or more bitcointalk.org users have reported that they believe that the creator of this topic displays some red flags which make them high-risk. (Login to see the detailed trust ratings.) While the bitcointalk.org administration does not verify such claims, you should proceed with extreme caution.
Pages: [1] 2 »  All
  Print  
Author Topic: ETHICAL PROBLEM WITH BITMAIN  (Read 2293 times)
gablay12 (OP)
Legendary
*
Offline Offline

Activity: 918
Merit: 1000


View Profile
August 02, 2015, 05:56:35 PM
 #1

I own and run a miner farm consisting of S5,S4 antminers and SP.

I have experienced serious problems with S5.5 of them are problematic.They have bad boards and controllers.I have contacted with Ms.Sherry who is customer representative of Bitmain.She is very friendly and caring.However, they want me to send broken parts (boards and controllers) with UPS, and they say THEY ARE GOING TO DECIDE WHETHER IT IS DUE TO IMPROPER USE OR NOT.

Is it ethical? The manufacturer will decide if it is due to improper use and if it is her fault she is going to replace it.This is really immoral.How can someone can judge and give decision for himself.This must change.Bitmain must select someone for each country or territory to decide.Bitmain must pay to these guys but they must be independent.

Have you had such an experience?What are your customer experience with them?


The more I meet people, the more I like my dog.
philipma1957
Legendary
*
Offline Offline

Activity: 4298
Merit: 8823


'The right to privacy matters'


View Profile WWW
August 02, 2015, 07:04:14 PM
 #2

I own and run a miner farm consisting of S5,S4 antminers and SP.

I have experienced serious problems with S5.5 of them are problematic.They have bad boards and controllers.I have contacted with Ms.Sherry who is customer representative of Bitmain.She is very friendly and caring.However, they want me to send broken parts (boards and controllers) with UPS, and they say THEY ARE GOING TO DECIDE WHETHER IT IS DUE TO IMPROPER USE OR NOT.

Is it ethical? The manufacturer will decide if it is due to improper use and if it is her fault she is going to replace it.This is really immoral.How can someone can judge and give decision for himself.This must change.Bitmain must select someone for each country or territory to decide.Bitmain must pay to these guys but they must be independent.

Have you had such an experience?What are your customer experience with them?



bitmaintech sends gear quickly.-----------------I ordered direct around 20 times a total of about 30 pieces of gear  everyone on time or early.


bitmaintechs' gear works at better then 90%---------------of 30 s-1's s-3's and s-5's 1 bad s-1


bitmaintech is only so so replacing bad gear.--------------- they  where very bad at  replacing the broken s-1 I had it replaced by minersource instead.


I won't count the 240 plus u-1's and u-2's as I purchased from resellers.  about 3 or 4 of around 240 usb sticks were duds.

▄▄███████▄▄
▄██████████████▄
▄██████████████████▄
▄████▀▀▀▀███▀▀▀▀█████▄
▄█████████████▄█▀████▄
███████████▄███████████
██████████▄█▀███████████
██████████▀████████████
▀█████▄█▀█████████████▀
▀████▄▄▄▄███▄▄▄▄████▀
▀██████████████████▀
▀███████████████▀
▀▀███████▀▀
.
 MΞTAWIN  THE FIRST WEB3 CASINO   
.
.. PLAY NOW ..
Tupsu
Legendary
*
Offline Offline

Activity: 1218
Merit: 1003



View Profile
August 02, 2015, 07:25:13 PM
 #3

I  sent all my broken Antminer S5 parts to Bitmaintech (Serbia).

Read more  Bitmain tech support and warranty
gablay12 (OP)
Legendary
*
Offline Offline

Activity: 918
Merit: 1000


View Profile
August 02, 2015, 07:34:36 PM
 #4

Bitmain can not decide improper use or manufacturer fault.She is the manufacturer.

You can not judge yourself and make decision.It is not ethical.That is what I say.

The more I meet people, the more I like my dog.
gablay12 (OP)
Legendary
*
Offline Offline

Activity: 918
Merit: 1000


View Profile
August 02, 2015, 07:37:43 PM
 #5

I own and run a miner farm consisting of S5,S4 antminers and SP.

I have experienced serious problems with S5.5 of them are problematic.They have bad boards and controllers.I have contacted with Ms.Sherry who is customer representative of Bitmain.She is very friendly and caring.However, they want me to send broken parts (boards and controllers) with UPS, and they say THEY ARE GOING TO DECIDE WHETHER IT IS DUE TO IMPROPER USE OR NOT.

Is it ethical? The manufacturer will decide if it is due to improper use and if it is her fault she is going to replace it.This is really immoral.How can someone can judge and give decision for himself.This must change.Bitmain must select someone for each country or territory to decide.Bitmain must pay to these guys but they must be independent.

Have you had such an experience?What are your customer experience with them?



bitmaintech sends gear quickly.-----------------I ordered direct around 20 times a total of about 30 pieces of gear  everyone on time or early.


bitmaintechs' gear works at better then 90%---------------of 30 s-1's s-3's and s-5's 1 bad s-1


bitmaintech is only so so replacing bad gear.--------------- they  where very bad at  replacing the broken s-1 I had it replaced by minersource instead.


I won't count the 240 plus u-1's and u-2's as I purchased from resellers.  about 3 or 4 of around 240 usb sticks were duds.



I do not say they do not deliver on time what I say is we need a third party to decide if a part is not working because of improper use or faulty manufacture.

The more I meet people, the more I like my dog.
DebitMe
Legendary
*
Offline Offline

Activity: 2800
Merit: 1012

Get Paid Crypto To Walk or Drive


View Profile
August 02, 2015, 07:39:35 PM
 #6

Bitmain can not decide improper use or manufacturer fault.She is the manufacturer.

You can not judge yourself and make decision.It is not ethical.That is what I say.

Well your wrong, that is how everything works.  You bring your broken phone, computer, insert gadget here, into where you bought it from, they decide if they replace it for you.

Its not fair you didn't listen and overclocked your units which broke them and voided your warranty, and now your complaining about it.  Besides, they can't tell anything from the blades about how you ran them so just send them back and they will get replaced.

Get paid crypto to walk or drive. Play Cubieverse! Earn Hundreds Monthly!
https://cubieverse.onelink.me/Hakd/xoz6sp52
gablay12 (OP)
Legendary
*
Offline Offline

Activity: 918
Merit: 1000


View Profile
August 02, 2015, 07:43:35 PM
 #7

I am an aerospace engineer.I know what they are technically capable of and not.It is not about money, it is just not ethical.

The more I meet people, the more I like my dog.
Meech
Hero Member
*****
Offline Offline

Activity: 924
Merit: 1000



View Profile
August 02, 2015, 08:51:06 PM
 #8

Although my opinion varies on their sales and marketing.  Their warranty and repair of non warrantied equipment is top notch.  Albeit from their lack of replacement parts on hand which tends to be nill, my experience was Bitmain US in Denver. 
frankenmint
Legendary
*
Offline Offline

Activity: 1456
Merit: 1018


HoneybadgerOfMoney.com Weed4bitcoin.com


View Profile WWW
August 02, 2015, 09:02:23 PM
 #9

I am an aerospace engineer.I know what they are technically capable of and not.It is not about money, it is just not ethical.

I'm not one to judge but could you give specifics of what issues you had?  I bought a few s1s back in January last year and I only had a problem with one of them having a dashboard that toasted out - they replaced it immediately and sent me shipping to return the failed piece.  I think they've been burned before.  That doesn't justify feeling like you're being taken advantage of here.  This probably wouldn't be a big deal but because you used bitcoin, there's no return recourse for you (you can't just issue a chargeback)

I don't see a question of ethics - as long as you feel confident about your return shipping quality, you should be fine, if that was really a worry or issue, then you should have acquired shipping insurance so that you would have been compensated for filing a claim had it BEEN damaged as a result of shipping. 

toptek
Legendary
*
Offline Offline

Activity: 1274
Merit: 1000


View Profile
August 03, 2015, 06:39:44 AM
 #10

Although my opinion varies on their sales and marketing.  Their warranty and repair of non warrantied equipment is top notch.  Albeit from their lack of replacement parts on hand which tends to be nill, my experience was Bitmain US in Denver.  


can you tell me how so >  warranty and repair of non warrantied equipment is top notch .  i just tried once again to buy two hash boards even offered to send in my boards for repair got a really rude reply back on that one,  I don't care if there new or used as long as they work i don't need a warranty either but they want more then what it costs for a used/second hand  S5  . mine is out of warranty, that's top notch ? .


Ive been treated way better in warranty by them. i may have it sold on ebay any way , i was just hoping to save to a few bucks and keep it, i planed to buy a used/second hand one if it sold sense they increased the warranty to 30 days .. and it makes better sense to buy it used/second hand S5 at least then i know it's ok . and Works , some times buying used is best just depends who you buy from .

For security, your account has been locked. Email acctcomp15@theymos.e4ward.com
Meech
Hero Member
*****
Offline Offline

Activity: 924
Merit: 1000



View Profile
August 03, 2015, 06:20:28 PM
 #11

Although my opinion varies on their sales and marketing.  Their warranty and repair of non warrantied equipment is top notch.  Albeit from their lack of replacement parts on hand which tends to be nill, my experience was Bitmain US in Denver.  


can you tell me how so >  warranty and repair of non warrantied equipment is top notch .  i just tried once again to buy two hash boards even offered to send in my boards for repair got a really rude reply back on that one,  I don't care if there new or used as long as they work i don't need a warranty either but they want more then what it costs for a used/second hand  S5  . mine is out of warranty, that's top notch ? .


Ive been treated way better in warranty by them. i may have it sold on ebay any way , i was just hoping to save to a few bucks and keep it, i planed to buy a used/second hand one if it sold sense they increased the warranty to 30 days .. and it makes better sense to buy it used/second hand S5 at least then i know it's ok . and Works , some times buying used is best just depends who you buy from .

This was just my experience with them.  Like I said  they fail when it comes to spare parts for miners.  You can't hope for them to repair everything after warranty is over.  This is just the way the industry is.
MCHouston
Hero Member
*****
Offline Offline

Activity: 882
Merit: 500


Where am I?


View Profile
August 03, 2015, 06:28:23 PM
 #12

This is pretty standard by any manufacturer, when I used to repair electronics. Sony, Panasonic and many others required us to void warranties if the water sensor was ever tripped, keep in mind that if the camera or electronics is in cold A/C and you take it out on a hot humid day it may trip the sensor.  Other then that most got repaired under warranty.

Is it moral since its their money and their deciding?  Probably not, but they will not go out of their way not to honor their warranty cause if people complain in mass its ruins their reputation.  So in the case of 5 miners, I would expect them to be honest.

BTC 13WWomzkAoUsXtxANN9f1zRzKusgFWpngJ
LTC LKXYdqRzRC8WciNDtiRwCeb8tZtioZA2Ks
DOGE DMsTJidwkkv2nL7KwwkBbVPfjt3MhS4TZ9
gablay12 (OP)
Legendary
*
Offline Offline

Activity: 918
Merit: 1000


View Profile
August 03, 2015, 08:07:56 PM
 #13

Is it moral since its their money and their deciding?  Probably not, but they will not go out of their way not to honor their warranty cause if people complain in mass its ruins their reputation.  So in the case of 5 miners, I would expect them to be honest.


I will pass trough this experience and share my experience with you.

The more I meet people, the more I like my dog.
notlist3d
Legendary
*
Offline Offline

Activity: 1456
Merit: 1000



View Profile
August 03, 2015, 08:10:51 PM
 #14

This is pretty standard by any manufacturer, when I used to repair electronics. Sony, Panasonic and many others required us to void warranties if the water sensor was ever tripped, keep in mind that if the camera or electronics is in cold A/C and you take it out on a hot humid day it may trip the sensor.  Other then that most got repaired under warranty.

Is it moral since its their money and their deciding?  Probably not, but they will not go out of their way not to honor their warranty cause if people complain in mass its ruins their reputation.  So in the case of 5 miners, I would expect them to be honest.

I don't know if it's moral or not.   But some people put the units under pretty horrible conditions.   I remember when SP20 showed one that had salt water damage I believe.   It is crazy but I have heard of some just down right bad conditions for miners.

Shipping it back is a normal procedure.  Most likely there are some good parts they can reuse.   A good example is S3 controller boards.  Most bricked boards they were able to make come back to life.   So shipping them back provided a source of a good amount of controller boards for future returns.  Ethical... i do not know but I think that was a business decision not ethics.

What did they decide on yours op?

jstefanop
Legendary
*
Offline Offline

Activity: 2173
Merit: 1401


View Profile
August 03, 2015, 08:19:27 PM
 #15

I am an aerospace engineer.I know what they are technically capable of and not.It is not about money, it is just not ethical.

How is this not ethical?? You could be running the S5s in a bad environment with not adequate cooling with boards hashing at 100C. You want bitmain to just keep sending you free boards because your farm is not setup right? They have the right to check the boards to see what is causing the issue, and its pretty easy to confirm that the boards were overheated etc.

Project Apollo: A Pod Miner Designed for the Home https://bitcointalk.org/index.php?topic=4974036
FutureBit Moonlander 2 USB Scrypt Stick Miner: https://bitcointalk.org/index.php?topic=2125643.0
toptek
Legendary
*
Offline Offline

Activity: 1274
Merit: 1000


View Profile
August 03, 2015, 08:28:09 PM
 #16

Although my opinion varies on their sales and marketing.  Their warranty and repair of non warrantied equipment is top notch.  Albeit from their lack of replacement parts on hand which tends to be nill, my experience was Bitmain US in Denver.  


can you tell me how so >  warranty and repair of non warrantied equipment is top notch .  i just tried once again to buy two hash boards even offered to send in my boards for repair got a really rude reply back on that one,  I don't care if there new or used as long as they work i don't need a warranty either but they want more then what it costs for a used/second hand  S5  . mine is out of warranty, that's top notch ? .


Ive been treated way better in warranty by them. i may have it sold on ebay any way , i was just hoping to save to a few bucks and keep it, i planed to buy a used/second hand one if it sold sense they increased the warranty to 30 days .. and it makes better sense to buy it used/second hand S5 at least then i know it's ok . and Works , some times buying used is best just depends who you buy from .

This was just my experience with them.  Like I said  they fail when it comes to spare parts for miners.  You can't hope for them to repair everything after warranty is over.  This is just the way the industry is.

cool but my point is I'm wiling to pay for out of warranty Service.  In the past in the US all places like MSI ASUS etc usually have a set fee for that kind of service and don't do this , I live in the US . I thought the  Us has a law to cover this or did, the law for out of warranty service says they  can only charge so much and not the price of a new or used one if they offer repair servcie or parts. sense they told me or gave me a price it falls under that law , even went as far as told me to send in the hash boards. but it's cool , I 'm letting it go. it was just how they handled it all hard nosed and for no reason . like knocking off a 100 to 120  bucks would hurt them or the shipping .  in the past when i bought stuff from them in the US from Denver they were very nice and treated me kindly like i mattered . I gave some really kind words to them for that .

For security, your account has been locked. Email acctcomp15@theymos.e4ward.com
Finksy
Legendary
*
Offline Offline

Activity: 1022
Merit: 1003



View Profile
August 03, 2015, 10:03:31 PM
 #17

This process is no different than Apple, Sony, or any of the big electronics manufacturers.  If you don't like the terms of their warranty, don't buy the product, or don't submit to warranty.  If you think it is immoral, you shouldn't have consented to buying their products with that understanding, but to expect them to have third party assessments conducted? Keep dreaming, it would be a complete waste of money.  And, if they didn't have an internal department that performed preliminary inspections on faulty hardware, they would just open themselves up to abuse and we as the consumer would end up paying more for the product.  I don't follow your reasoning in the slightest, and your education/experience is irrelevant to them in making this determination.

IBM 2880W PSU Packages: https://bitcointalk.org/index.php?topic=966135 IBM 4K PSU Breakout Boards & Packages: https://bitcointalk.org/index.php?topic=1308296 
Server PSU-powered GPU rig solutions! https://bitcointalk.org/index.php?topic=1864539  Wallet address: 1GWQYCv22cAikgTgT1zFuAmsJ9fFqq9TXf 
Finksy
Legendary
*
Offline Offline

Activity: 1022
Merit: 1003



View Profile
August 03, 2015, 10:16:20 PM
 #18

CK, I know you are on a rampage right now cleaning up hardware, but this is a very relevant hardware discussion in fairness, and I'm sure we are all interested to see how Bitmain's warranty department is doing.

IBM 2880W PSU Packages: https://bitcointalk.org/index.php?topic=966135 IBM 4K PSU Breakout Boards & Packages: https://bitcointalk.org/index.php?topic=1308296 
Server PSU-powered GPU rig solutions! https://bitcointalk.org/index.php?topic=1864539  Wallet address: 1GWQYCv22cAikgTgT1zFuAmsJ9fFqq9TXf 
ingiltere
Legendary
*
Offline Offline

Activity: 3164
Merit: 1537


BITCOIN


View Profile
August 03, 2015, 10:17:54 PM
 #19

Its not fair you didn't listen and overclocked your units which broke them and voided your warranty, and now your complaining about it.

OP didn't even say he overclocked those machines. Where did you get that from?

Sending back those devices will cost you a lot. I hope they replace them for you.

Professional gambling analyzer / Signature space for rent
DebitMe
Legendary
*
Offline Offline

Activity: 2800
Merit: 1012

Get Paid Crypto To Walk or Drive


View Profile
August 03, 2015, 10:24:35 PM
 #20

Its not fair you didn't listen and overclocked your units which broke them and voided your warranty, and now your complaining about it.

OP didn't even say he overclocked those machines. Where did you get that from?

Sending back those devices will cost you a lot. I hope they replace them for you.

Why else would the OP be complaining?  If he had nothing to hide then it would be little issue to just send the units back, have them evaluated, and issued new components, as Bitmain does every day with other customers.

Maybe instead of complaining he should be grateful that they offer a warranty service and would take the time and money to pay and train employees to do this work.  It surely would be cheaper if they dropped the warranty program and didn't have to worry about faulty units that weren't claimed faulty after a day or two of receiving them.

Get paid crypto to walk or drive. Play Cubieverse! Earn Hundreds Monthly!
https://cubieverse.onelink.me/Hakd/xoz6sp52
Pages: [1] 2 »  All
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!