[ANN] [XEMP] | [16M coins] | [EmpoCredits] | Backed by EmpoEX | 1 click MNodes.

[CjMapope]

up to block 67 here

ya 67 for mii too
i think its the whole chain as a TX i sent a friend has not arrived yet either in 5 hours :\

[EmpoEX]

Good morning everybody.

The chain is slow because there's not many people staking at this point.
We have sent more coins to new wallets (they haven't arrived yet, 10 confirmations needed). That will slowly increase chain speed.

When chain starts moving with normal speed, make sure you stake, so we can have a strong network.

If you need anything, mention EmpoEX-Drone in our chat and I'll answer to your questions.

[leonak]

Good morning everybody.

The chain is slow because there's not many people staking at this point.
We have sent more coins to new wallets (they haven't arrived yet, 10 confirmations needed). That will slowly increase chain speed.

When chain starts moving with normal speed, make sure you stake, so we can have a strong network.

If you need anything, mention EmpoEX-Drone in our chat and I'll answer to your questions.

Thanks for the update

[szenekonzept]

Good morning everybody.

The chain is slow because there's not many people staking at this point.
We have sent more coins to new wallets (they haven't arrived yet, 10 confirmations needed). That will slowly increase chain speed.

When chain starts moving with normal speed, make sure you stake, so we can have a strong network.

If you need anything, mention EmpoEX-Drone in our chat and I'll answer to your questions.

yes i would need, not to lose my VIP status, when moving my coins to the wallet, then you see me staking right away, it's the better concept anyway, because right now you end up rewarding for not staking and that could result in a permanent blockchain problem ;-)

[CjMapope]

Good morning everybody.

The chain is slow because there's not many people staking at this point.
We have sent more coins to new wallets (they haven't arrived yet, 10 confirmations needed). That will slowly increase chain speed.

When chain starts moving with normal speed, make sure you stake, so we can have a strong network.

If you need anything, mention EmpoEX-Drone in our chat and I'll answer to your questions.

yes i would need, not to lose my VIP status, when moving my coins to the wallet, then you see me staking right away, it's the better concept anyway, because right now you end up rewarding for not staking and that could result in a permanent blockchain problem ;-)

i fear we have that problem sadly
nooone staking, all coins on exchnage still, un synced wallets

[szenekonzept]

Good morning everybody.

The chain is slow because there's not many people staking at this point.
We have sent more coins to new wallets (they haven't arrived yet, 10 confirmations needed). That will slowly increase chain speed.

When chain starts moving with normal speed, make sure you stake, so we can have a strong network.

If you need anything, mention EmpoEX-Drone in our chat and I'll answer to your questions.

yes i would need, not to lose my VIP status, when moving my coins to the wallet, then you see me staking right away, it's the better concept anyway, because right now you end up rewarding for not staking and that could result in a permanent blockchain problem ;-)

i fear we have that problem sadly
nooone staking, all coins on exchnage still, un synced wallets

its not a real problem, but a reason to rethink this policy
as soon as the first are staking it will move again ...



.

[CjMapope]

Good morning everybody.

The chain is slow because there's not many people staking at this point.
We have sent more coins to new wallets (they haven't arrived yet, 10 confirmations needed). That will slowly increase chain speed.

When chain starts moving with normal speed, make sure you stake, so we can have a strong network.

If you need anything, mention EmpoEX-Drone in our chat and I'll answer to your questions.

yes i would need, not to lose my VIP status, when moving my coins to the wallet, then you see me staking right away, it's the better concept anyway, because right now you end up rewarding for not staking and that could result in a permanent blockchain problem ;-)

i fear we have that problem sadly
nooone staking, all coins on exchnage still, un synced wallets

its not a real problem, but a reason to rethink this policy
as soon as the first are staking it will move again ...



.i have been staking almost 24 hours now? recieved rewards and everything, i think its bigger than that sadly but hey idk, we will c , im prob just gonna sell out at double profit and walk away, days of hold ups cost me too much BTC, call me shallow haha

[szenekonzept]

did anybody compile the wallet successfully, having some problems on kubuntu

[marcetin]

did anybody compile the wallet successfully, having some problems on kubuntu

Which error do you get?

[szenekonzept]

did anybody compile the wallet successfully, having some problems on kubuntu

Which error do you get?

Thanks for helping:

src/key.cpp: In Elementfunktion »bool CKey::SignCompact(const uint256&, std::vector<unsigned char>&) const«:
src/key.cpp:552:17: Warnung: Variable »ret« wird nicht verwendet [-Wunused-variable]
         if (int ret = secp256k1_ecdsa_sign_compact(instance_of_csecp256k1.ctx, hash.begin(), &vchSig[1], begin(), secp256k1_nonce_function_rfc6979, NULL, &rec))
                 ^
src/key.cpp: In Elementfunktion »bool CPubKey::VerifyCompact(const uint256&, const std::vector<unsigned char>&) const«:
src/key.cpp:632:10: Warnung: Variable »fComp« wird nicht verwendet [-Wunused-variable]
     bool fComp = IsCompressed();
          ^
src/key.cpp: In Elementfunktion »bool CPubKey::Decompress()«:
src/key.cpp:669:104: Fehler: »int*« kann nicht nach »unsigned char*« für Argument »3« nach »int secp256k1_ec_pubkey_decompress(const secp256k1_context_t*, const unsigned char*, unsigned char*, int*)« umgewandelt werden
     int ret = secp256k1_ec_pubkey_decompress(instance_of_csecp256k1.ctx, (unsigned char*)begin(), &clen);
                                                                                                        ^
make: *** [build/key.o] Fehler 1



.

[EmpoEX]

did anybody compile the wallet successfully, having some problems on kubuntu

Which error do you get?

Thanks for helping:

src/key.cpp: In Elementfunktion »bool CKey::SignCompact(const uint256&, std::vector<unsigned char>&) const«:
src/key.cpp:552:17: Warnung: Variable »ret« wird nicht verwendet [-Wunused-variable]
         if (int ret = secp256k1_ecdsa_sign_compact(instance_of_csecp256k1.ctx, hash.begin(), &vchSig[1], begin(), secp256k1_nonce_function_rfc6979, NULL, &rec))
                 ^
src/key.cpp: In Elementfunktion »bool CPubKey::VerifyCompact(const uint256&, const std::vector<unsigned char>&) const«:
src/key.cpp:632:10: Warnung: Variable »fComp« wird nicht verwendet [-Wunused-variable]
     bool fComp = IsCompressed();
          ^
src/key.cpp: In Elementfunktion »bool CPubKey::Decompress()«:
src/key.cpp:669:104: Fehler: »int*« kann nicht nach »unsigned char*« für Argument »3« nach »int secp256k1_ec_pubkey_decompress(const secp256k1_context_t*, const unsigned char*, unsigned char*, int*)« umgewandelt werden
     int ret = secp256k1_ec_pubkey_decompress(instance_of_csecp256k1.ctx, (unsigned char*)begin(), &clen);
                                                                                                        ^
make: *** [build/key.o] Fehler 1



.

This error is caused by the secp256k1 library, specifically the latest version. The required version is on the commit a1d5ae1. This can be be done by doing “git checkout a1d5ae1” after cloning the secp256k1 repo, and then re-making and re-installing the library. This should resolve the problem.

[EmpoEX]

We are working on a fix. Bare with us

[szenekonzept]

did anybody compile the wallet successfully, having some problems on kubuntu

Which error do you get?

Thanks for helping:

src/key.cpp: In Elementfunktion »bool CKey::SignCompact(const uint256&, std::vector<unsigned char>&) const«:
src/key.cpp:552:17: Warnung: Variable »ret« wird nicht verwendet [-Wunused-variable]
         if (int ret = secp256k1_ecdsa_sign_compact(instance_of_csecp256k1.ctx, hash.begin(), &vchSig[1], begin(), secp256k1_nonce_function_rfc6979, NULL, &rec))
                 ^
src/key.cpp: In Elementfunktion »bool CPubKey::VerifyCompact(const uint256&, const std::vector<unsigned char>&) const«:
src/key.cpp:632:10: Warnung: Variable »fComp« wird nicht verwendet [-Wunused-variable]
     bool fComp = IsCompressed();
          ^
src/key.cpp: In Elementfunktion »bool CPubKey::Decompress()«:
src/key.cpp:669:104: Fehler: »int*« kann nicht nach »unsigned char*« für Argument »3« nach »int secp256k1_ec_pubkey_decompress(const secp256k1_context_t*, const unsigned char*, unsigned char*, int*)« umgewandelt werden
     int ret = secp256k1_ec_pubkey_decompress(instance_of_csecp256k1.ctx, (unsigned char*)begin(), &clen);
                                                                                                        ^
make: *** [build/key.o] Fehler 1



.

This error is caused by the secp256k1 library, specifically the latest version. The required version is on the commit a1d5ae1. This can be be done by doing “git checkout a1d5ae1” after cloning the secp256k1 repo, and then re-making and re-installing the library. This should resolve the problem.

i assume this libary is to be installed like  said in the readme:
"EmpoCredits is dependent upon libsecp256k1"
why not even tell where to get it? Would be much more helpful.
i  tried 'git checkout a1d5ae1" and get a "no such directory" but i think i am in the wrong directory,
because i am in the coins git and think i should be somewhere related to the libary, right??

Please enlighten me and you should also quickly update this (or at least the readme), to enable users, to figure out the installation.

thanks for helping


.

[EmpoEX]

did anybody compile the wallet successfully, having some problems on kubuntu

Which error do you get?

Thanks for helping:

src/key.cpp: In Elementfunktion »bool CKey::SignCompact(const uint256&, std::vector<unsigned char>&) const«:
src/key.cpp:552:17: Warnung: Variable »ret« wird nicht verwendet [-Wunused-variable]
         if (int ret = secp256k1_ecdsa_sign_compact(instance_of_csecp256k1.ctx, hash.begin(), &vchSig[1], begin(), secp256k1_nonce_function_rfc6979, NULL, &rec))
                 ^
src/key.cpp: In Elementfunktion »bool CPubKey::VerifyCompact(const uint256&, const std::vector<unsigned char>&) const«:
src/key.cpp:632:10: Warnung: Variable »fComp« wird nicht verwendet [-Wunused-variable]
     bool fComp = IsCompressed();
          ^
src/key.cpp: In Elementfunktion »bool CPubKey::Decompress()«:
src/key.cpp:669:104: Fehler: »int*« kann nicht nach »unsigned char*« für Argument »3« nach »int secp256k1_ec_pubkey_decompress(const secp256k1_context_t*, const unsigned char*, unsigned char*, int*)« umgewandelt werden
     int ret = secp256k1_ec_pubkey_decompress(instance_of_csecp256k1.ctx, (unsigned char*)begin(), &clen);
                                                                                                        ^
make: *** [build/key.o] Fehler 1



.

This error is caused by the secp256k1 library, specifically the latest version. The required version is on the commit a1d5ae1. This can be be done by doing “git checkout a1d5ae1” after cloning the secp256k1 repo, and then re-making and re-installing the library. This should resolve the problem.

i assume this libary is to be installed like  said in the readme:
"EmpoCredits is dependent upon libsecp256k1"
why not even tell where to get it? Would be much more helpful.
i  tried 'git checkout a1d5ae1" and get a "no such directory" but i think i am in the wrong directory,
because i am in the coins git and think i should be somewhere related to the libary, right??

Please enlighten me and you should also quickly update this (or at least the readme), to enable users, to figure out the installation.

thanks for helping


.

The library can be found here: https://github.com/bitcoin/secp256k1.

Clone this library, then do the checkout command, and then follow the install instructions for libsecp256k1 in their readme.

Code:

git clone https://github.com/bitcoin/secp256k1.git
cd secp256k1
git checkout a1d5ae1
./autogen.sh
./configure
make
sudo make install

Due to these extra steps we might consider including the required version of libsecp256k1 in our repo for easier compilation.

[szenekonzept]

src/key.cpp:669:104: Fehler: »int*« kann nicht nach »unsigned char*« für Argument »3« nach »int secp256k1_ec_pubkey_decompress(const secp256k1_context_t*, const unsigned char*, unsigned char*, int*)« umgewandelt werden
     int ret = secp256k1_ec_pubkey_decompress(instance_of_csecp256k1.ctx, (unsigned char*)begin(), &clen);
                                                                                                        ^
make: *** [build/key.o] Fehler 1



.

This error is caused by the secp256k1 library, specifically the latest version. The required version is on the commit a1d5ae1. This can be be done by doing “git checkout a1d5ae1” after cloning the secp256k1 repo, and then re-making and re-installing the library. This should resolve the problem.

Please enlighten me and you should also quickly update this (or at least the readme), to enable users, to figure out the installation.

thanks for helping

The library can be found here: https://github.com/bitcoin/secp256k1.

Clone this library, then do the checkout command, and then follow the install instructions for libsecp256k1 in their readme.

Code:

git clone https://github.com/bitcoin/secp256k1.git
cd secp256k1
git checkout a1d5ae1
./autogen.sh
./configure
make
sudo make install

Due to these extra steps we might consider including the required version of libsecp256k1 in our repo for easier compilation.

thank you thats what i assumed, the location does not seem to show up on  every searchresults (of course i did )
so till you included or not included the libary,
just update your readme with these info's and enjoy 25% less user giving up on that 

thank you
Matthias

.

[rt99]

So is this wallet syncing now? 

[szenekonzept]

So is this wallet syncing now? 

no is misses a leveldb file (have to compile again to provide the full name) but i will check my OS-libarys first and then ask again, thank you

.

[rt99]

So. How can u make a new great exchange if you can't compile a proper working wallet?? 

[EmpoEX]

So. How can u make a new great exchange if you can't compile a proper working wallet?? 

Hello, rt99

It's not about compiling a wallet. It's much bigger than it seems.
New blockchain will be live in the next 24 hours from now.

Wallet fixes, new blockchain.

Sorry for any trouble caused

[szenekonzept]

So. How can u make a new great exchange if you can't compile a proper working wallet?? 

Hello, rt99

It's not about compiling a wallet. It's much bigger than it seems.
New blockchain will be live in the next 24 hours from now.

Wallet fixes, new blockchain.

Sorry for any trouble caused

shit happens
keep going i can wait

Matthias


.

.