ANTMINER S5+ is available to order, 7.722TH/S 0.445J/GH

[BITMAIN]

ANTMINER S5+ 7.722TH/S for Sales at bitmaintech.com

Only available at bitmaintech.com

Bitmain is proud to introduce our newest iteration of AntMiner, the S5+. This model is comprised of three hashing modules, each of which is approximately the same form factor as the S5, with the addition of an extra hashing board located in the middle. The new design squeezes 144 BM1384 chips into the same area that the S5 fit only 60 chips into.

  

Specifications:

• Hash Rate: 7722 GH/s ±5%
• Power Consumption: 3436W (at the wall, with AC/DC 93% efficiency, 25℃ ambient temp)
• Power Efficiency: 0.445W/GH (at the wall, with AC/DC 93% efficiency, 25℃ ambient temp)
• Rated Voltage: 12V
• Chip Process: 28nm
• Chip quantity per unit: 432x BM1384
• Dimensions: 275 mm x 372 mm x 155 mm
• Cooling: 6x 12038 fan
• Operating Conditions: 0 °C to 40 °C
• Network Connection: Ethernet

The three modules are linked together and operated with one controller board located on the middle unit. Customers must buy the set of three modules as one unit; Bitmain is not selling the individual modules of the S5+.

In addition to the higher hashrate, the AntMiner S5+ also achieves a better power efficiency than the standard S5. At 0.445J/GH, the S5+ is approximately 13% more efficient than its predecessor.

Comparison

	AntMiner S4+	AntMiner S5	AntMiner S5+
Chip	204x BM1382	60x BM1384	432x BM1384
Hashrate	2570GH/s	1155GH/s	7722GH/s
Power Draw	1500W	590W	3436W
Power Efficiency	0.58J/GH	0.51J/GH	0.445J/GH
Dimensions(mm)	432*442*133	298*137*155	275*372*155
Weight(boxed)	14.4kg	3.5kg	11kg

A New Cooling Solution:
The S5+ uses an unpainted aluminum casing. It also does away with the larger heatsinks of previous models; instead each chip is fitted with its own small heatsink for greater heat dissipation.

Each of the three modules contains two 12038 axial fans, one on each end. Each fan runs at approximately 4,200 RPM.

Hash board with heat sinks attached.
 
Front view with fans attached

Front view (fans removed). Note the new heat sink configuration.

Rear view

Hash board, with no heat sinks attached.

Detail view of the control board.

[1503053738]

1503053738

[1503053738]

1503053738

[BITMAIN]

Reserved for FAQ

[zagamon]

There we go! It is official now, cheers to that.

[Tupsu]

Ordered

2x S5+ with shipping to estonia
18.958 BTC

[OgNasty]

Ordered.

$2,475 shipped to US.

[philipma1957]

I went with bitmaintech's new hashnest offering instead

I got 10th for 6.66 btc.

Frankly I rather have this unit but the wife would kill me.



The price is good 2375 usd  for 7.7 th

with shipping  to usa 2473.37   keeps under that 2500 barrier.  (thank you)



As for my  choice of 10th for 6.66 btc

bitmaintech has sold 10,514  1th contracts for PACMIC v3 in the last 20 hours

that is about 7000 btc in sales.

It would be interesting to see what turns out to be the better buy.

[CryptoCrane]

This looks amazing

[Tigggger]

Nice to see it's a lot cheaper than the $3000 that was previously mentioned, updated spreadsheet

[TheRealSteve]

Nice to see it's a lot cheaper than the $3000 that was previously mentioned, updated spreadsheet

I think somebody inquired last time whether that takes into account the pending reward halving, and I believe you mentioned that you assumed a constant difficulty.  Could you clarify the parameters you're using just for this thread

[markj113]

I went with bitmaintech's new hashnest offering instead

I got 10th for 6.66 btc.

Frankly I rather have this unit but the wife would kill me.



The price is good 2375 usd  for 7.7 th

with shipping  to usa 2473.37   keeps under that 2500 barrier.  (thank you)



As for my  choice of 10th for 6.66 btc

bitmaintech has sold 10,514  1th contracts for PACMIC v3 in the last 20 hours

that is about 7000 btc in sales.

It would be interesting to see what turns out to be the better buy.

considering trying this out myself, be interesting to see how it plays out

[fullzero]

It would be interesting to see what turns out to be the better buy.

The 10x v3 should make around 0.105BTC?

I would guess the v3's unless your power cost is very low.

Couldn't resist at this price.  It's been too long since I got a new miner. 

Plus winter is coming; this 1 miner will heat 1/3 of my house.  Hopefully it is not too loud in the basement.

[Tigggger]

Nice to see it's a lot cheaper than the $3000 that was previously mentioned, updated spreadsheet

I think somebody inquired last time whether that takes into account the pending reward halving, and I believe you mentioned that you assumed a constant difficulty.  Could you clarify the parameters you're using just for this thread

Sorry, yes assumes static BTC/USD and difficulty, no-one knows on the former or the latter just gives a quick baseline to work from according to your own thinking and risk

EDIT: The reward drop isn't for nearly a year so didn't see the point including that, some people will have import duty on top and maybe PSU's as well.

[TheRealSteve]

Sorry, yes assumes static BTC/USD and difficulty, no-one knows on the former or the latter just gives a quick baseline to work from according to your own thinking and risk

Also assumes no halving?  Since that one is semi-reasonably known (absolutely in block count, more fuzzy in date)

[anamichii]

i hope someday my solo mining rig got a block, so i cant buy this miner  
this miner price is more than 30.000.000 in indonesian rupiah
with ship, tax and custom duties, it could be more than 40.000.000

my calculation, 3436watt is 120.000 idr in 24h
i assume that static diff, coins per day 0.07368986 = 273.000 idr, so the income is 153.000 per day
and 261,4379085 days to get roi  

[sajidfbi]

Please update regarding my question - Question from BITMAIN

I am really wonder, Does all China states and cities charge apply so much tax as 1.527 BTC (403.750 USD) by buying each single unit of s5+ ? what about hongking shipping does any such tax applies on hongkong shipping address ?

[Biodom]

I went with bitmaintech's new hashnest offering instead

I got 10th for 6.66 btc.

Frankly I rather have this unit but the wife would kill me.



The price is good 2375 usd  for 7.7 th

with shipping  to usa 2473.37   keeps under that 2500 barrier.  (thank you)



As for my  choice of 10th for 6.66 btc

bitmaintech has sold 10,514  1th contracts for PACMIC v3 in the last 20 hours

that is about 7000 btc in sales.

It would be interesting to see what turns out to be the better buy.

phil, I cannot really get that pacmic stuff.
You pay for Th, then they will pay you until principal is paid, then they say the machine belong to them.
So, where is your profit?
Is today the first day and is there a pacmic thread?
Thanks

[bomberb17]

So we need to buy 3x PSUs to power this thing?

[sajidfbi]

So we need to buy 3x PSUs to power this thing?

Yeah you will need 3x PSU for this to run.

[zagamon]

So we need to buy 3x PSUs to power this thing?

Or just two of these https://www.protact.net/netzteile/6/servernetzteil-mit-2.250-watt-und-12-pci-express-stromanschluessen?c=8 (I am guessing).

[bomberb17]

So we need to buy 3x PSUs to power this thing?

Or just two of these https://www.protact.net/netzteile/6/servernetzteil-mit-2.250-watt-und-12-pci-express-stromanschluessen?c=8 (I am guessing).

I don't think you can use only 2x PSUs. According to bitmain's product info

Do not connect more than one PSU to the same hashing board!