ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH

[Dr Charles]

Sold out of US power adapters for the R1, I was going to buy five and leave them around the house and work. How can you run out of the adapter.....

What kind of plug comes standard on the R1?  Are there other places to buy the adapter?

I am afraid that nothing comes standard (no plug included as default) as there is no description of any electrical connection apart from the plug.

Which honestly doesnt make sense to me... it should come standard with a plug regardless what country it is designed for and then they should provide the option to purchase the adapter for countries that dont match

[1714667444]

1714667444

[1714667444]

1714667444

[1714667444]

1714667444

[edonkey]

Does anyone know if they've shipped any S7's today?

I emailed them last night and the answer I got this morning was that they're "having a holiday now."

No shipping for me until the 9th (if then). Very irritating since I bought within the first 5 days.

[Dr Charles]

Does anyone know if they've shipped any S7's today?

I emailed them last night and the answer I got this morning was that they're "having a holiday now."

No shipping for me until the 9th (if then). Very irritating since I bought within the first 5 days.

\

Hey at least you got a response. I ordered on day 2 of ordering and still no shipment or response to ticket.

[UfoRia]

*cough* *cough* *cough*

I was saying this yesterday, so I took screenshots this morning to prove it. While I was preparing them someone above mentioned the same thing. So, we check back in TEN days once they go BACK to work to start working on the orders sequentially...



Re: BITMAIN Order Details
Wed, Sep 30, 2015 at 8:35 AM

Sorry, we're having holiday now and miners will be shipped out after we're back to work around Oct. 9.
Please wait for update.
Thanks

On Sep 29, 2015, at 11:20 PM, <REDACTED> wrote:

Not a chance mine will ship before Chinese Golden Week 2015?

[edonkey]

I will get a new batt for my multimeter and do some measureing for you guys.

My S7 is running stable at 4.8 at 600. Power at wall 1180. Using a RM1000 and a RM650

Mine only got to 4.7 at stock speeds. But at 612, it averages 4.8 and is very stable. After increasing the frequency the HW errors went up a bit from 0.0222% to 0.0386%, but that's still fine.

Overall this unit is very stable and predictable. I just wish they could have shipped the rest of units that I ordered before getting plastered on baiju for a week

[beffje]

I will get a new batt for my multimeter and do some measureing for you guys.

My S7 is running stable at 4.8 at 600. Power at wall 1180. Using a RM1000 and a RM650

Mine only got to 4.7 at stock speeds. But at 612, it averages 4.8 and is very stable. After increasing the frequency the HW errors went up a bit from 0.0222% to 0.0386%, but that's still fine.

Overall this unit is very stable and predictable. I just wish they could have shipped the rest of units that I ordered before getting plastered on baiju for a week

I am at a HW of 0.005% at stock speed. Running for 48 hours now temps are 42-41-46

[aurel57]

Does anyone know if they've shipped any S7's today?

I emailed them last night and the answer I got this morning was that they're "having a holiday now."

No shipping for me until the 9th (if then). Very irritating since I bought within the first 5 days.

This sucks...I take it then a whole bunch of us will be later than 10 days past today which will be "late"

[AriesIV10]

Does anyone know if they've shipped any S7's today?

My next shipment is 9/9 is still "Unshipped"

[aurel57]

Does anyone know if they've shipped any S7's today?

My next shipment is 9/9 is still "Unshipped"

Mine was 8th unshipped also

[AriesIV10]

Does anyone know where I can buy some long 18pin cables for the control boards to the hashing cards?  I would like to run some experiments with some of my S5s.  I was referred to J4bberwock but there is not any response to pm. 

[dmwardjr]

Does anyone know where I can buy some long 18pin cables for the control boards to the hashing cards?  I would like to run some experiments with some of my S5s.  I was referred to J4bberwock but there is not any response to pm.  

Hi AriesIV10,

The quote below is from J4bberwock in his breakout board thread.  You can click on the heading above the quote to get to his thread.  He has a LOT going on at the moment.  However, the answer to your question is below.

I'm very busy at the moment, so I don't answer most of the PM until I have time to give concrete answer.
I actually take a few hours 2 or 3 times a week for the emails/PM.

Regarding the S5 data cables, I should get them in stock just after the chinese national holiday.
I believe I wrote it in the thread about the S5+/S7 controller a few days ago.

Also, I won't take new boards orders until the end of this week.

[beffje]

Does anyone know where I can buy some long 18pin cables for the control boards to the hashing cards?  I would like to run some experiments with some of my S5s.  I was referred to J4bberwock but there is not any response to pm.  

Hi AriesIV10,

The quote below is from J4bberwock in his breakout board thread.  You can click on the heading above the quote to get to his thread.  He has a LOT going on at the moment.  However, the answer to your question is below.

I'm very busy at the moment, so I don't answer most of the PM until I have time to give concrete answer.
I actually take a few hours 2 or 3 times a week for the emails/PM.

Regarding the S5 data cables, I should get them in stock just after the chinese national holiday.
I believe I wrote it in the thread about the S5+/S7 controller a few days ago.

Also, I won't take new boards orders until the end of this week.

Thanks dmwardjr,

We will just have to be patient.

[AriesIV10]

Does anyone know where I can buy some long 18pin cables for the control boards to the hashing cards?  I would like to run some experiments with some of my S5s.  I was referred to J4bberwock but there is not any response to pm.  

Hi AriesIV10,

The quote below is from J4bberwock in his breakout board thread.  You can click on the heading above the quote to get to his thread.  He has a LOT going on at the moment.  However, the answer to your question is below.

I'm very busy at the moment, so I don't answer most of the PM until I have time to give concrete answer.
I actually take a few hours 2 or 3 times a week for the emails/PM.

Regarding the S5 data cables, I should get them in stock just after the chinese national holiday.
I believe I wrote it in the thread about the S5+/S7 controller a few days ago.

Also, I won't take new boards orders until the end of this week.

Thanks dmwardjr,

We will just have to be patient.

Thanks for mediating! I do appreciate your comments throughout this forum.

[dmwardjr]

Thanks for mediating! I do appreciate your comments throughout this forum.

Sure, happy to oblige!

Cheers

[UfoRia]

I wonder what they will provide for the delay since they go back to work on the 9th and this was the batch one statement...

Batch one scheduled shipping date is in late September of 21~30. If shipping out 10 days later than the scheduled one, it won't be considered as delay.


Ufo

[padrino]

I wonder what they will provide for the delay since they go back to work on the 9th and this was the batch one statement...

Batch one scheduled shipping date is in late September of 21~30. If shipping out 10 days later than the scheduled one, it won't be considered as delay.


Ufo

Based on how I read the above there is no delay until October 10th, 10 days after the estimated shipping window.

[UfoRia]

Based on how I read the above there is no delay until October 10th, 10 days after the estimated shipping window.

You think they are going to ship out all of the remaining batch one miners in less than two days since they don't come back from vacation until the 9th?


Ufo

[-droid-]

my one S7 is still holding at 4720gh at 593, will be testing the PSU later today running each one individually.. we'll see how it goes

[UfoRia]

my one S7 is still holding at 4720gh at 593, will be testing the PSU later today running each one individually.. we'll see how it goes

Did you try the soft reset that resolved philip's issue that he made a thread about?

https://bitcointalk.org/index.php?topic=1196671.0


Ufo

[-droid-]

my one S7 is still holding at 4720gh at 593, will be testing the PSU later today running each one individually.. we'll see how it goes

Did you try the soft reset that resolved philip's issue that he made a thread about?


Ufo

yeah I tried that a bunch of times while trying to run stock when i first noticed the unit's hash rate was slipping.. still had no effect on mine