Sierra8561
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 11, 2016, 04:09:17 AM |
|
Jezz the failure rate on these are high.
i bought a total of 5 units in different batches so far i had 1 unit die on me completely. cost me 150$ to ship back and took over a month to get back. 1 units had 1 board die 1 week after i got it. cost me 75$ to ship back and it''s going on almost 3 weeks since i shipped it. 1 month since i reported the problem to Bitmain. I still don't have it back now another board just died on me again today on a different unit. what is this crap. None of my units are OC'ed and they are running on finksy Psu's so it's not that the problem. maybe i'm just very unlucky but IMO the S7 are the worst generation ever for reliability. now i'm looking at another 75$ and 1 month again to get another replacement board.
Way to go Bitmain
Send it to Denver, it won't take a month to get back. I've been a week tops with shipping time.
|
|
|
|
adaseb
Legendary
Offline
Activity: 3850
Merit: 1727
Up to 300% + 200 FS deposit bonuses
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 11, 2016, 05:45:15 AM |
|
S9 out of stock. ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) About Us UGeekStore has one simple vision, to have the coolest gadgets for nerds all over the world. It all started with a simple curiosity for technology. Sometimes useful, and sometimes just for fun. At the end, we can all enjoy today's technology. UGeekStore will continue to update the website weekly with new gadgets, be sure to visit and see what's new! http://ugeekstore.com/product/antminer-s7-newest-batch-91According to that website there is also an S8 and an S8+
|
|
|
|
OgNasty
Donator
Legendary
Offline
Activity: 4844
Merit: 4548
Leading Crypto Sports Betting & Casino Platform
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 11, 2016, 05:47:01 AM |
|
Guesses on S9 specs? 9TH/s ~ 1,300 watts ~ $2,200
|
..Stake.com.. | | | ▄████████████████████████████████████▄ ██ ▄▄▄▄▄▄▄▄▄▄ ▄▄▄▄▄▄▄▄▄▄ ██ ▄████▄ ██ ▀▀▀▀▀▀▀▀▀▀ ██████████ ▀▀▀▀▀▀▀▀▀▀ ██ ██████ ██ ██████████ ██ ██ ██████████ ██ ▀██▀ ██ ██ ██ ██████ ██ ██ ██ ██ ██ ██ ██████ ██ █████ ███ ██████ ██ ████▄ ██ ██ █████ ███ ████ ████ █████ ███ ████████ ██ ████ ████ ██████████ ████ ████ ████▀ ██ ██████████ ▄▄▄▄▄▄▄▄▄▄ ██████████ ██ ██ ▀▀▀▀▀▀▀▀▀▀ ██ ▀█████████▀ ▄████████████▄ ▀█████████▀ ▄▄▄▄▄▄▄▄▄▄▄▄███ ██ ██ ███▄▄▄▄▄▄▄▄▄▄▄▄ ██████████████████████████████████████████ | | | | | | ▄▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▄ █ ▄▀▄ █▀▀█▀▄▄ █ █▀█ █ ▐ ▐▌ █ ▄██▄ █ ▌ █ █ ▄██████▄ █ ▌ ▐▌ █ ██████████ █ ▐ █ █ ▐██████████▌ █ ▐ ▐▌ █ ▀▀██████▀▀ █ ▌ █ █ ▄▄▄██▄▄▄ █ ▌▐▌ █ █▐ █ █ █▐▐▌ █ █▐█ ▀▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▀█ | | | | | | ▄▄█████████▄▄ ▄██▀▀▀▀█████▀▀▀▀██▄ ▄█▀ ▐█▌ ▀█▄ ██ ▐█▌ ██ ████▄ ▄█████▄ ▄████ ████████▄███████████▄████████ ███▀ █████████████ ▀███ ██ ███████████ ██ ▀█▄ █████████ ▄█▀ ▀█▄ ▄██▀▀▀▀▀▀▀██▄ ▄▄▄█▀ ▀███████ ███████▀ ▀█████▄ ▄█████▀ ▀▀▀███▄▄▄███▀▀▀ | | | ..PLAY NOW.. |
|
|
|
RichBC
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 11, 2016, 06:03:17 AM |
|
S9 out of stock. ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) About Us UGeekStore has one simple vision, to have the coolest gadgets for nerds all over the world. It all started with a simple curiosity for technology. Sometimes useful, and sometimes just for fun. At the end, we can all enjoy today's technology. UGeekStore will continue to update the website weekly with new gadgets, be sure to visit and see what's new! http://ugeekstore.com/product/antminer-s7-newest-batch-91According to that website there is also an S8 and an S8+ So a site with S7, S7+, S8, S8+ and an S9 all with the same picture and price. Well if anyone believes that................ Rich
|
|
|
|
blindminer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 11, 2016, 06:41:23 AM |
|
Hi, What is your highest temereture reccomendation for long run?
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4228
Merit: 8376
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 11, 2016, 01:10:19 PM |
|
Hi, What is your highest temereture reccomendation for long run?
i prefer 65 c or lower. no one has shown 70c to run for six months without a fail ----- I have not read a credible post of an s-7 running since nov at 70c without issues. many have done 65 c for more then 7 months- my batch 2 runs at 64c since oct.
|
|
|
|
kaltar
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 11, 2016, 01:47:36 PM |
|
Jezz the failure rate on these are high.
i bought a total of 5 units in different batches so far i had 1 unit die on me completely. cost me 150$ to ship back and took over a month to get back. 1 units had 1 board die 1 week after i got it. cost me 75$ to ship back and it''s going on almost 3 weeks since i shipped it. 1 month since i reported the problem to Bitmain. I still don't have it back now another board just died on me again today on a different unit. what is this crap. None of my units are OC'ed and they are running on finksy Psu's so it's not that the problem. maybe i'm just very unlucky but IMO the S7 are the worst generation ever for reliability. now i'm looking at another 75$ and 1 month again to get another replacement board.
Way to go Bitmain
Send it to Denver, it won't take a month to get back. I've been a week tops with shipping time. It`s still under warranty, and for warranty i must send it to China. i`m wondering if it might be better to pay for the repair and shipping to denver vs sending to china at High cost shipping + loosing it for a month Can anyone offer advise on repair cost in Denver .?
|
|
|
|
Sierra8561
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 11, 2016, 01:52:21 PM |
|
Jezz the failure rate on these are high.
i bought a total of 5 units in different batches so far i had 1 unit die on me completely. cost me 150$ to ship back and took over a month to get back. 1 units had 1 board die 1 week after i got it. cost me 75$ to ship back and it''s going on almost 3 weeks since i shipped it. 1 month since i reported the problem to Bitmain. I still don't have it back now another board just died on me again today on a different unit. what is this crap. None of my units are OC'ed and they are running on finksy Psu's so it's not that the problem. maybe i'm just very unlucky but IMO the S7 are the worst generation ever for reliability. now i'm looking at another 75$ and 1 month again to get another replacement board.
Way to go Bitmain
Send it to Denver, it won't take a month to get back. I've been a week tops with shipping time. It`s still under warranty, and for warranty i must send it to China. i`m wondering if it might be better to pay for the repair and shipping to denver vs sending to china at High cost shipping + loosing it for a month Can anyone offer advise on repair cost in Denver .? That was my point. Your costs are almost the same and you save time.
|
|
|
|
kaltar
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 11, 2016, 01:59:30 PM |
|
Jezz the failure rate on these are high.
i bought a total of 5 units in different batches so far i had 1 unit die on me completely. cost me 150$ to ship back and took over a month to get back. 1 units had 1 board die 1 week after i got it. cost me 75$ to ship back and it''s going on almost 3 weeks since i shipped it. 1 month since i reported the problem to Bitmain. I still don't have it back now another board just died on me again today on a different unit. what is this crap. None of my units are OC'ed and they are running on finksy Psu's so it's not that the problem. maybe i'm just very unlucky but IMO the S7 are the worst generation ever for reliability. now i'm looking at another 75$ and 1 month again to get another replacement board.
Way to go Bitmain
Send it to Denver, it won't take a month to get back. I've been a week tops with shipping time. It`s still under warranty, and for warranty i must send it to China. i`m wondering if it might be better to pay for the repair and shipping to denver vs sending to china at High cost shipping + loosing it for a month Can anyone offer advise on repair cost in Denver .? That was my point. Your costs are almost the same and you save time. Denver it is ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) thanks. p.s. do you have a link for them
|
|
|
|
blindminer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 11, 2016, 02:12:34 PM |
|
Hi, What is your highest temereture reccomendation for long run?
i prefer 65 c or lower. no one has shown 70c to run for six months without a fail ----- I have not read a credible post of an s-7 running since nov at 70c without issues. many have done 65 c for more then 7 months- my batch 2 runs at 64c since oct. ok thanks. that's a relief!
|
|
|
|
yochdog
Legendary
Offline
Activity: 2044
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 11, 2016, 03:27:58 PM |
|
Jezz the failure rate on these are high.
i bought a total of 5 units in different batches so far i had 1 unit die on me completely. cost me 150$ to ship back and took over a month to get back. 1 units had 1 board die 1 week after i got it. cost me 75$ to ship back and it''s going on almost 3 weeks since i shipped it. 1 month since i reported the problem to Bitmain. I still don't have it back now another board just died on me again today on a different unit. what is this crap. None of my units are OC'ed and they are running on finksy Psu's so it's not that the problem. maybe i'm just very unlucky but IMO the S7 are the worst generation ever for reliability. now i'm looking at another 75$ and 1 month again to get another replacement board.
Way to go Bitmain
Send it to Denver, it won't take a month to get back. I've been a week tops with shipping time. It`s still under warranty, and for warranty i must send it to China. i`m wondering if it might be better to pay for the repair and shipping to denver vs sending to china at High cost shipping + loosing it for a month Can anyone offer advise on repair cost in Denver .? That was my point. Your costs are almost the same and you save time. Denver it is ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) thanks. p.s. do you have a link for them What is this denver repair you speak of? Can anyone offer details? I am looking for a reliable repair shop stateside.
|
I am a trusted trader! Ask Inaba, Luo Demin, Vanderbleek, Sannyasi, Episking, Miner99er, Isepick, Amazingrando, Cablez, ColdHardMetal, Dextryn, MB300sd, Robocoder, gnar1ta$ and many others!
|
|
|
Sierra8561
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 11, 2016, 03:28:17 PM |
|
Jezz the failure rate on these are high.
i bought a total of 5 units in different batches so far i had 1 unit die on me completely. cost me 150$ to ship back and took over a month to get back. 1 units had 1 board die 1 week after i got it. cost me 75$ to ship back and it''s going on almost 3 weeks since i shipped it. 1 month since i reported the problem to Bitmain. I still don't have it back now another board just died on me again today on a different unit. what is this crap. None of my units are OC'ed and they are running on finksy Psu's so it's not that the problem. maybe i'm just very unlucky but IMO the S7 are the worst generation ever for reliability. now i'm looking at another 75$ and 1 month again to get another replacement board.
Way to go Bitmain
Send it to Denver, it won't take a month to get back. I've been a week tops with shipping time. It`s still under warranty, and for warranty i must send it to China. i`m wondering if it might be better to pay for the repair and shipping to denver vs sending to china at High cost shipping + loosing it for a month Can anyone offer advise on repair cost in Denver .? That was my point. Your costs are almost the same and you save time. Denver it is ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) thanks. p.s. do you have a link for them Bitmainwarranty.com
|
|
|
|
RichBC
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 11, 2016, 03:34:58 PM |
|
I see that along with the release of the 2 Fan Batch 17 S7 Bitmain has removed all of the spares, Fans, Controller, BBB, Cables etc. May be a sign that this is the last Batch of S7?
Rich
|
|
|
|
yslyung
Legendary
Offline
Activity: 1500
Merit: 1002
Mine Mine Mine
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 11, 2016, 04:10:35 PM |
|
Hi, What is your highest temereture reccomendation for long run?
i prefer 65 c or lower. no one has shown 70c to run for six months without a fail ----- I have not read a credible post of an s-7 running since nov at 70c without issues. many have done 65 c for more then 7 months- my batch 2 runs at 64c since oct. since B3 till now avg mid 60's to 70C even sometimes 72C during daytime, they run fine. oc'ed too. but imo, below 70C is good, above "might" not be so good but so far ok for me, over 10 x s7 from B3 onwards. 1 or 2 board failure but not due to temp, it was due to QC me thinks, replaced by bmt but yeah turnaround takes abt 3 weeks or so if you're lucky.
|
|
|
|
elrippo
Legendary
Offline
Activity: 1008
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 11, 2016, 04:35:40 PM |
|
I see that along with the release of the 2 Fan Batch 17 S7 Bitmain has removed all of the spares, Fans, Controller, BBB, Cables etc. May be a sign that this is the last Batch of S7?
Rich
That would be a possible explanation for the missing spare sparts, which i tend to agree with you ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
For Advertisement. PM me to discuss.
|
|
|
FlensGold
Legendary
Offline
Activity: 1405
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 11, 2016, 05:39:49 PM |
|
I see that along with the release of the 2 Fan Batch 17 S7 Bitmain has removed all of the spares, Fans, Controller, BBB, Cables etc. May be a sign that this is the last Batch of S7?
Rich
That would be a possible explanation for the missing spare sparts, which i tend to agree with you ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) You can still buy them when clicking on "After-Sales Repair": https://shop.bitmain.com/product.htm?parts=parts
|
|
|
|
Sierra8561
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 11, 2016, 05:45:04 PM |
|
anyone else notice they updated all firmware for the s7 today?
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 11, 2016, 05:55:17 PM |
|
I see that along with the release of the 2 Fan Batch 17 S7 Bitmain has removed all of the spares, Fans, Controller, BBB, Cables etc. May be a sign that this is the last Batch of S7?
Rich
That would be a possible explanation for the missing spare sparts, which i tend to agree with you ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) You can still buy them when clicking on "After-Sales Repair": https://shop.bitmain.com/product.htm?parts=partsthanks I missed that one
|
|
|
|
kaltar
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 11, 2016, 06:09:24 PM |
|
I updated in the hopes that it would bring back my dead board, it did not, but the new firmware is reporting temps on the wrong boards. IE: my dead board is at 62degrees while my good one is at 29degrees.
Nice Bitmains
|
|
|
|
RichBC
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 11, 2016, 06:11:15 PM |
|
anyone else notice they updated all firmware for the s7 today?
Interesting and as always a pity that they do not tell us what they have changed.... ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Rich
|
|
|
|
|