mining speeds on AMD R9 380

[gomer124]

I'm getting around 400 to 430peaks Mhps

Is this decent speed for this card?

my system specs below:

------------------
System Information
------------------
Time of this report: 9/28/2015, 22:31:31
       Machine name: NZXTBEAST
   Operating System: Windows Embedded 8.1 Industry Pro 64-bit (6.3, Build 9600) (9600.winblue_ltsb.150715-0840)
           Language: English (Regional Setting: English)
System Manufacturer: To be filled by O.E.M.
       System Model: To be filled by O.E.M.
               BIOS: BIOS Date: 04/07/14 17:59:34 Ver: 04.06.05
          Processor: AMD FX(tm)-6300 Six-Core Processor              (4 CPUs), ~3.5GHz
             Memory: 8192MB RAM
Available OS Memory: 8092MB RAM
          Page File: 1970MB used, 7400MB available
        Windows Dir: C:\Windows
    DirectX Version: DirectX 11
DX Setup Parameters: Not found
   User DPI Setting: Using System DPI
 System DPI Setting: 144 DPI (150 percent)
    DWM DPI Scaling: UnKnown
     DxDiag Version: 6.03.9600.17415 64bit Unicode


----------------
Display Devices
---------------
          Card name: AMD Radeon (TM) R9 380 Series
       Manufacturer: Advanced Micro Devices, Inc.
          Chip type: AMD Radeon Graphics Processor (0x6939)
           DAC type: Internal DAC(400MHz)
        Device Type: Full Device
         Device Key: Enum\PCI\VEN_1002&DEV_6939&SUBSYS_E308174B&REV_F1
     Display Memory: 7910 MB
   Dedicated Memory: 4070 MB
      Shared Memory: 3840 MB
       Current Mode: 1920 x 1080 (32 bit) (60Hz)
       Monitor Name: Dell P2214H(Digital)
      Monitor Model: DELL P2214H
         Monitor Id: DELA098
        Native Mode: 1920 x 1080(p) (60.000Hz)
        Output Type: DVI
       Monitor Name: Generic PnP Monitor
      Monitor Model: TSB-TV
         Monitor Id: TSB0205
        Native Mode: 1920 x 1080(p) (60.000Hz)
        Output Type: HDMI
        Driver Name: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver File Version: 8.17.0010.1404 (English)
     Driver Version: 15.200.1062.1003
        DDI Version: 11.1
     Feature Levels: 11.1,11.0,10.1,10.0,9.3,9.2,9.1
       Driver Model: WDDM 1.3

[1714161691]

1714161691

[1714161691]

1714161691

[troleybüs]

Are you sure about 400-430 Mh/s? It's probably Kh/s.
I couldn't find this cards real hashing values, so I don't exactly know how profitable is it. You can check out other cards here: https://litecoin.info/Mining_hardware_comparison
Energy consumption is another value that you need to consider when you do mining with GPU.

[VirosaGITS]

Are you trying to mine Bitcoin with GPU? 400Mh/s doesn't sound particularly wrong but if you are, i categorically recommend you cease this and go to the altcoin board. You can do this to get a feel for mining but you'll be putting strain on your GPU and spending electricity for virtually 0 gain.

Are you sure about 400-430 Mh/s? It's probably Kh/s.
I couldn't find this cards real hashing values, so I don't exactly know how profitable is it. You can check out other cards here: https://litecoin.info/Mining_hardware_comparison
Energy consumption is another value that you need to consider when you do mining with GPU.

400Kh/s would be too low for Scrypt and if he is mining Scrypt he is in the wrong board. And just like SHA256d/Bitcoin, there is no point in GPU mining it anymore.

[nonbody]

or what algo are you using, if thats scrypt its pretty low but it all depends

[GriffinHeart]

If you're mining bitcoin, that's a pretty high number...
If you're mining scrypt, that's actually quite low, assuming that you typed KH/s as Mh/s. We need a bit more information on what you're mining to give you a straight answer.

[notabeliever]

then what do you mine with it?

[VirosaGITS]

then what do you mine with it?

You don't. Or you head over to the altcoin section. There's not many opportunities to mine profitably with GPUs. There are some, however.