[TX]TRANSFER - BITTREX - MULTIPOOL - ANDROID - POS,TOR,MN, STEALTH

[torig]

Downloaded. But it seems, that the it contains only blk0001.dat file.

And it seems to if I replace just this file, it is stuck during loading TransferCoin QT wallet. "Loading block indes..."

Do you know exact steps or provide all the backed blockchain needed files, please?

Is here somewhere official blockchain backup to speed up synchronization, please?

Here http://txproject.io/ Beetwen windows and Mac wallets.

This my downloaded folder
Just copy and paste to transfer folder and replace

2 files txleveldb and blk0001.dat

[1714921652]

1714921652

[1714921652]

1714921652

[1714921652]

1714921652

[thoth-Atlantian]

Downloaded. But it seems, that the it contains only blk0001.dat file.

And it seems to if I replace just this file, it is stuck during loading TransferCoin QT wallet. "Loading block indes..."

Do you know exact steps or provide all the backed blockchain needed files, please?

Is here somewhere official blockchain backup to speed up synchronization, please?

Here http://txproject.io/ Beetwen windows and Mac wallets.

This my downloaded folder
Just copy and paste to transfer folder and replace

2 files txleveldb and blk0001.dat

replace the 2 files you downloaded into the client folder, and blockchain will be downloaded in no time

[nov]

Was missing txleveldb after unrar. It is ok now, thanks!

Synchronizing.

Downloaded. But it seems, that the it contains only blk0001.dat file.

And it seems to if I replace just this file, it is stuck during loading TransferCoin QT wallet. "Loading block indes..."

Do you know exact steps or provide all the backed blockchain needed files, please?

Is here somewhere official blockchain backup to speed up synchronization, please?

Here http://txproject.io/ Beetwen windows and Mac wallets.

This my downloaded folder
Just copy and paste to transfer folder and replace

2 files txleveldb and blk0001.dat

[Jonesd]

I do not see my IP address in the Masternode list, though. Is there a way to check if it is actually active?

I see  my IP in the node list now, but it does not show as active. Anybody know if it is working?

I just received my first 0.5 TX, so I guess it is working!

[torig]

Need update OP and info on Bittrex.
New members should see actual info.

[thoth-Atlantian]

Need update OP and info on Bittrex.
New members should see actual info.

Or you can continue to buy them cheap before they do see the info 

[torig]

Need update OP and info on Bittrex.
New members should see actual info.

Or you can continue to buy them cheap before they do see the info 

Can't. all btc in.

[nov]

I am trying to setup a masternode on Ubuntu 16.

Trying to follow this guide.
https://docs.google.com/presentation/d/1xArNdbs75XUy7hbeX2XKNiGnc0JFWDivNlkg9XQrsq0/edit#slide=id.p13

But it seems I am getting compilation issue, see below.

Is not here simpler way to get transferd and transfer-cli for Ubuntu?

sudo make -f makefile.unix
g++ -c -O2  -pthread -Wall -Wextra -Wno-ignored-qualifiers -Wformat -Wformat-security -Wno-unused-parameter -Wunused-function -Wunused-variable -fpermissive -Wconversion-null -g -DBOOST_SPIRIT_THREADSAFE -I/home/pavel/Transfercoin/src -I/home/pavel/Transfercoin/src/obj -DUSE_UPNP=0 -DUSE_IPV6=1 -DENABLE_WALLET -I/home/pavel/Transfercoin/src/secp256k1/include -I/home/pavel/Transfercoin/src/leveldb/include -I/home/pavel/Transfercoin/src/leveldb/helpers -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2  -MMD -MF obj/alert.d -o obj/alert.o alert.cpp
In file included from alert.h:9:0,
                 from alert.cpp:5:
serialize.h:19:48: fatal error: boost/type_traits/is_fundamental.hpp: No such file or directory
 #include <boost/type_traits/is_fundamental.hpp>
                                                ^
compilation terminated.
makefile.unix:217: recipe for target 'obj/alert.o' failed
make: *** [obj/alert.o] Error 1

[kingcrimson]

You guys think TX could hit $1?

[torig]

You guys think TX could hit $1?

i hope it not  will very hard...

[torig]

I am trying to setup a masternode on Ubuntu 16.

Trying to follow this guide.
https://docs.google.com/presentation/d/1xArNdbs75XUy7hbeX2XKNiGnc0JFWDivNlkg9XQrsq0/edit#slide=id.p13

But it seems I am getting compilation issue, see below.

Is not here simpler way to get transferd and transfer-cli for Ubuntu?

sudo make -f makefile.unix
g++ -c -O2  -pthread -Wall -Wextra -Wno-ignored-qualifiers -Wformat -Wformat-security -Wno-unused-parameter -Wunused-function -Wunused-variable -fpermissive -Wconversion-null -g -DBOOST_SPIRIT_THREADSAFE -I/home/pavel/Transfercoin/src -I/home/pavel/Transfercoin/src/obj -DUSE_UPNP=0 -DUSE_IPV6=1 -DENABLE_WALLET -I/home/pavel/Transfercoin/src/secp256k1/include -I/home/pavel/Transfercoin/src/leveldb/include -I/home/pavel/Transfercoin/src/leveldb/helpers -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2  -MMD -MF obj/alert.d -o obj/alert.o alert.cpp
In file included from alert.h:9:0,
                 from alert.cpp:5:
serialize.h:19:48: fatal error: boost/type_traits/is_fundamental.hpp: No such file or directory
 #include <boost/type_traits/is_fundamental.hpp>
                                                ^
compilation terminated.
makefile.unix:217: recipe for target 'obj/alert.o' failed
make: *** [obj/alert.o] Error 1

when trying compile linux wallet -got this error too..
In result -installed windows wallet  from http://txproject.io/ in wine. wallet.dat encrypted,

[torig]

TX today hit 88MN.
We will grow!

[nov]

I finally compiled transferd on Linux.

Now I try to configure and to start it.

But strange thing is, that command "transferd masternode status" displays different address than where 10 000 TX were sent.

./transferd masternode status
{
    "vin" : "CTxIn(COutPoint(be3f41da92, 0), scriptSig=)",
    "service" : "x.y.z.w:17170",
    "status" : 9,
    "pubKeyMasternode" : "address",
    "notCapableReason" : "Could not find suitable coins!"
}

But address in Masternode list - Transfer network in controller Transfer-QT wallet is displayed correctly.

Trying to find out what happened and how to resolve it?

Any suggestion, please?

Is it correct or it needs to be fixed?

How to find out if it is setup correctly?

Controller Transfer-QT wallet displays "Masternode is Running."

Command "./transferd masternode list" shows ENABLED.

EDIT: But it seems to work, since I received first 0.5 TX mn reward.

[torig]

I finally compiled transferd on Linux.

Now I try to configure and to start it.

But strange thing is, that command "transferd masternode status" displays different address than where 10 000 TX were sent.

./transferd masternode status
{
    "vin" : "CTxIn(COutPoint(be3f41da92, 0), scriptSig=)",
    "service" : "x.y.z.w:17170",
    "status" : 9,
    "pubKeyMasternode" : "address",
    "notCapableReason" : "Could not find suitable coins!"
}

But address in Masternode list - Transfer network in controller Transfer-QT wallet is displayed correctly.

Trying to find out what happened and how to resolve it?

Any suggestion, please?

Is it correct or it needs to be fixed?

How to find out if it is setup correctly?

Controller Transfer-QT wallet displays "Masternode is Running."

Command "./transferd masternode list" shows ENABLED.

EDIT: But it seems to work, since I received first 0.5 TX mn reward.

Great. which commands you use for compile?

[CryptoIsKey]

Here is a revised version on how to setup a Masternode on a VPS using windows https://youtu.be/WXggprkVdnM

[Infibite Nit]

Can anyone give me a current Masternode overview: how many TX coins needed, average monthly income, etc?

[torig]

Can anyone give me a current Masternode overview: how many TX coins needed, average monthly income, etc?

How many TX are people earning per masternode per day?

I average 2 x 0.5 per hour. So about 25 coins per day.

10k TX =1Masternode.

[nov]

I compiled it on VPS. Tried to use original guide as much as possible. Tried to solve every observed issue on the way and it worked. With Google friend asking.
https://docs.google.com/presentation/d/1xArNdbs75XUy7hbeX2XKNiGnc0JFWDivNlkg9XQrsq0/edit#slide=id.p15

I finally compiled transferd on Linux.

Now I try to configure and to start it.

But strange thing is, that command "transferd masternode status" displays different address than where 10 000 TX were sent.

./transferd masternode status
{
    "vin" : "CTxIn(COutPoint(be3f41da92, 0), scriptSig=)",
    "service" : "x.y.z.w:17170",
    "status" : 9,
    "pubKeyMasternode" : "address",
    "notCapableReason" : "Could not find suitable coins!"
}

But address in Masternode list - Transfer network in controller Transfer-QT wallet is displayed correctly.

Trying to find out what happened and how to resolve it?

Any suggestion, please?

Is it correct or it needs to be fixed?

How to find out if it is setup correctly?

Controller Transfer-QT wallet displays "Masternode is Running."

Command "./transferd masternode list" shows ENABLED.

EDIT: But it seems to work, since I received first 0.5 TX mn reward.

Great. which commands you use for compile?

[BTC4QB]

tx can be dumped to 4k sat again, i guess so 

[torig]

tx can be dumped to 4k sat again, i guess so  

1. Seems you want cheap coins.
2.Dumpers, will a fools if will do it.We're now have  a 93MN (historical high TX).
3. But all is possibly -this is market.